• 전기의세계
• /
• v.31 no.4
• /
• pp.303-307
• /
• 1982

This paper describes how to improve a induction moter efficiency by a slip frequency control. Digital filter controlled by microcomputer is introduced in control system of a constant speed-drive and it has prove that the moter can be drived with a high efficiency at a constant slip frequency. The constant slip frequency control method has a merit of simplness.

• Korean Journal of Agricultural Science
• /
• v.17 no.2
• /
• pp.115-129
• /
• 1990

This study was carried out to develop a microcomputer-based data acquisition system and software for analysis of engine vibration. Due to this development of system and software, studies on the vibration of engine was able to conduct efficiently. From the display of CRT, the outputs of test was compared and analysed on a zero-base motoring. The results obtained are summarized as follows : 1. Data acquisition system in microcomputer were designed and programmed and operated accurately. 2. The result of test was easily compared in monitoring of zero-base at color monitor. 3. This system and program developed was able to control the measuring intervals, no. of channels, and no. of data as wated. 4. The type of vibration of engine was type of bi-mode from the FFT and statistical analysis. 5. The maxima of engine vibration were 9.11 G at X-axis. 11.27 G at Y-axis, and 4.9 G at Z axis for full load of net output 6. The maxima of engine vibration unloaded were 4.28 G, 5.59 G, 2.68 G at 2200 rpm.

• Radiation Oncology Journal
• /
• v.2 no.1
• /
• pp.129-137
• /
• 1984

In brachytherapy, it is important to determine the positions of the radiation sources which are inserted into a patient and to estimate the dose resulting from the treatment. Calculation of the dose distribution throughout an implant is so laborious that it is rarely done by manual methods except for model cases. It is possible to calculate isodose distributions and tumor doses for individual patients by the use of a microcomputer. In this program, the dose rate and dose distributions are calculated by numerical integration of point source and the localization of radiation sources are obtained from two radiographs at right angles taken by a simulator developed for the treatment planning. By using microcomputer for brachytherapy, we obtained the result as following 1. Dose calculation and irradiation time for tumor could be calculated under one or five seconds after input data. 2. It was same value under$\pm2\%$ error between dose calculation by computer program and measurement dose. 3. It took about five minutes to reconstruct completely dose distribution for intracavitary irradiation. 4. Calculating by computer made remarkly reduction of dose errors compared with Quimby's calculation in interstitial radiation implantation. 5. It could calculate the biological isoffect dose for high and low dose rate activities.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.77-80
• /
• 1985

The R-R interval analyzer was developed to measure the autonomic nervous system function using microcomputer. The system based on 8 bit microcomputer including bandpass filter, R-wave detector and clock generator in order to obtain the mean value, standard deviation, total time, CV value, maximum value and minimum value in the specific view point of R-R interval variation. The pattern of R-R interval change after resting, voluntary standing and deep breathing can be analysed in normal subjects and diabetics with autonomic nervous dysfunction. The amplitude of the R-R interval variation showed sensitive pattern for normal subjects at resting, standing and deep breathing. On the contrary, the periodicities of amplitude for abnormal subjects with autonomic nervous dysfunction showed dull pattern. It was suggested that R-R interval analyzer is a good detection method for dysfunction of autonomic nervous system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.2
• /
• pp.162-172
• /
• 1991

In proportion to the capacity enlargement of the induction motor system controlled by current source inverter, the capacitance of the commutating capacitor is enlarged and then the spike value of output voltage is increased at the moment of charge and discharge. Moreover, the output currnet includes a number of harmonic components. Such voltage spike and harmonics generate the torque ripple and lead to bad effects on the performance of the induction motor. In this study, all the harmonics excluding 17th and 19th harmonics were mostly elimunated by adopting 18-phase Triple High Frequency Current Source Inverter(HFCSI), and the spike component of output voltage was reduced by adding the Voltage Clamping Circuit(VCC). As a result, the torque ripple and the commutation loss were reduced and the performance of the system was improved. Experiments for speed control were carried out in the tripple current source inverter system for induction motor drive. Overall system was controlled by ONE CHIP MICROCOMPUTER(INTEL 8751). Control circuits were simplified and good experimental results in the constant V/F control were obtained due to the flexibility of the microcomputer.

• Structural Engineering and Mechanics
• /
• v.2 no.4
• /
• pp.395-402
• /
• 1994

An improved finite element-transfer matrix method is applied to the transient analysis of plates with large displacement under various excitations. In the present method, the transfer of state vectors from left to right in a combined finite element-transfer matrix method is changed into the transfer of generally incremental stiffness equations of every section from left to right. Furthermore, in this method, the propagation of round-off errors occurring in recursive multiplications of transfer and point matrices is avoided. The Newmark-${\beta}$ method is employed for time integration and the modified Newton-Raphson method for equilibrium iteration in each time step. An ITNONDL-W program based on this method using the IBM-PC/AT microcomputer is developed. Finally numerical examples are presented to demonstrate the accuracy as well as the potential of the proposed method for dynamic large deflection analysis of plates with random boundaries under various excitations.

• The Journal of Information Technology and Database
• /
• v.6 no.2
• /
• pp.1-18
• /
• 1999

The purpose of this study was to identify the effect of microcomputer networking on user perception of potential threats to security employing user attitudes as a moderating variable. A research model consisting of microcomputer networking as the independent variable, user perception of potential threats to security as the dependent variable, and user attitude toward security control as the moderating variable was developed through literature review. The results of this study provide an empirical evidence of the importance of environmental change(information systems networking) on user perception of potential threats to security. Further-more the result imply that in order to improve security performance through the reinforcement of user perception of threats to security in the organization, user attitudes should be made favorable.

• Journal of the military operations research society of Korea
• /
• v.15 no.2
• /
• pp.105-126
• /
• 1989

A Geographic Information System (GIS) is a system designed to capture, store, manipulate, retrieve and display the data which are referenced to geographic location. With the progress of computer graphics technologies, GIS is now become applicable to microcomputer level. A prototype Sea Information System (SIS) applicable to microcomputer has been developed for serving informations related to naval operations in the special sea areas. This system includes GIS technologies, cartographic data captured through the tablet digitizer. which results immediate displaying on pen plotters. GIS provides users with menu-driven user interface for the retrieval of informations concerning military zones, patrol area of war ship, naval bases, radar sites and its search area, missile stations, and ships' current positions. The system is currently applicable to IBM PC/AT. Minimal hardware configuration consists 640k RAM, hard disk, and pen plotter or dot matrix printer.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.31-36
• /
• 1986

As a part of study on automatic control system for green houses, an automatic irrigation system was developed by using microcomputer. For the study, gypsum block was used as a sensing device of soil moisture and its data was designed to transfer to microcomputer through A/D converter. Also, software which be able to control the irrigation time and flow rate by the solenoid valve was developed. This system was tested by using practical data and the following results were summarized. 1. Since the gypsum was very accurate in addition with chiep and easy to manufacture, it turned out to be a very good device to detect the soil moisture in this system. 2. Also, solenoid valve was very excellent device for controlling the water flow rate since its control error is less then 1% when the irrigation time is over 100 seconds.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.2
• /
• pp.63-68
• /
• 1989

This paper discussed the Multi-PAM inverter for static power supply design. The controller part composed of one-chip microcomputer obtained control pattern simply. The configuration of termination part was composed of double bridge inverter and three-phase, three-winding transformer. The output waveforms using a controller and transformers synthesized the multi-PAM wave form by a voltage level of 22 steps per one-cycle. The output waveforms using the Low Pass Filter approximated to the sine wave.