• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.271-274
• /
• 1997

Skin temperatures, heart rates and skin conductance levels were tested in order to extract the biological characteristics of the physical constitutional types in according to the Lee's 4 type physical constitutional theory. The subjects of this experiment were 14 ; 5 Macro-Negative subjects, 5 Micro-Negative subjects, 3 Micro-Positive subjects and 1 Macro-Positive subject. All subjects were stimulated with 2.5Hz 30V peak-peak pulses for 2 minutes. As the results, in normal prestimulation state the skin temperatures of the trunk in Micro-Positive and Macro-Positive subjects were higher than those of Macro-Negative and Micro-Negative subjects. In Macro-Negative subjects the reflected skin temperature of lever was the highest in the anterior trunk. In Micro-Negative subjects the reflected skin temperature of kidney was the highest in the trunk. In Micro-Positive subjects the reflected skin temperature of stomach was the highest in the trunk. In Macro-Positive subject the reflected skin temperature of lung was the highest in the trunk. In transient poststimulation state, heart rate was decreased in 7 cases among of 10 Macro-Negative and Micro-Negative subjects, but it was iscreased in 3 cases among of 4 Micro-Positive and Macro-Positive subjects. And the hand temperature was increased in 8 cases among of 10 Macro-Negative and Micro-Negative subjects, but it was decreased in 3 cases among of 4 Micro-Positive and Macro-Positive subjects.

• 한국도로학회논문집
• /
• 제5권3호
• /
• pp.21-29
• /
• 2003

현재 공항포장은 기존 포장관련정보의 관리에 대한 어려움이 있고, 장기공용으로 인해 유지보수비용이 증가하고 있어 예산의 효율적 활용과 공항포장의 체계적 유지관리가 필요하다. 이를 위해서 포장관리시스템을 도입할 필요성이 있다. 본 연구에서는 외국의 여러 포장관리시스템 중 세계적으로 널리 활용되고 있는 Micro PAVER를 국내에 도입하기 위한 방안을 연구하였다. 외국의 시스템을 국내에 적용하기 위해서는 환경차이, 포장관리수준 차이 등으로 인해 발생하는 오류를 최소화하기 위해 국내에 맞도록 적정화(customization)하는 연구가 필요하다. 따라서 본 연구에서는 Micro PAVER를 국내에 도입하기 위해 필요한 적정화 연구를 수행하였다 Micro PAVER의 논리 및 구조를 분석하여 Micro PAVER 운영에 주요하게 작용하는 부분을 기존 포장평가자료와 포장 전문가의 설문조사 방법을 이용하여 적정화하였다. 주요 적정화 부분은 포장파손예측모형, critical PCI, PCI에 따른 유지보수비용, 유지보수공법 및 단가, PCI 등급이다.

• 대한치과교정학회지
• /
• 제33권5호
• /
• pp.359-370
• /
• 2003

본 연구는 교정용 금속 브라켓에 다양한 방향에서의 복합적인 응력을 가하여 힘의 방향과 적용점에 따른 교정용 브라켓의 결합강도를 비교하고, 브라켓의 유지력을 평가하는데 기준이 되는 최소결합강도의 특성에 대해 알아보고자 시행되었다. 일정 한 표면특성을 갖는 금속봉에 Micro-Loc base, Chessboard base, Non-etched Foil-Mesh base 등 서로 다른 기저 면 형태를 가지는 3가지 종류의 금속 브라켓을 부착시키고, $0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;75^{\circ},\;90^{\circ}$의 Peel 결합강도$(_0PBS, \;_{15}PBS,\;_{30}PBS,\;_{45}PBS,\;_{60}PBS,\;_{75}PBS,\;_{90}PBS)$ 및 전단결합강도(SBS)와 인장결합강도(TBS)에 대한 브라켓의 결합강도를 측정하고, 각 브라켓의 기저면 면적을 고려하여 단위면적당 결합강도를 산출하여 비교한 결과 다음과 같은 결론을 얻었다. 1. Micro-Loc base와 Chessboard base 및 Non-etched Foil-Mesh base 브라켓 모두에서 전단결합강도(SBS)가 가장 컸다(P<0.01). 2. Peel 응력의 방향 변화에 따른 peel 결합강도(PBS)의 변화양상은 Micro-Loc base와 Chessboard base, Non-etched Foil-Mesh base 브라켓 모두에서 유사하였으며 (p>0.05), peel 응력의 적용 각이 증가할수록 peel 결합강도(PBS)는 감소하였고 $60^{\circ}$에서 최저값을 보였다(p<0.05). 3. Micro-Loc base에서 최저 peel 결합강도$(_{60}PBS)$는 전단결합강도(SBS)의 $29\%$ 수준이었으며, 인장결합강토(TBS)에 대해서는 $52\%$ 수준이었고, Chessboard base에서 최저 Peel bond strength$(_{60}PBS)$는 전단결합강도(SBS)의 $34\%$ 수준이었으며, 인장결합강도(TBS)에 대해서는 $61\%$ 수준이었으며, Non-etched Foil-Mesh base에서 최저 Peel 결합 강도$(_{60}PBS)$는 전단결합강도(SBS)의 $34\%$ 수준이었으며, 인장결합강도(TBS)에 대해서는 $55\%$ 수준이었다. 4. 단위 면적 당 결합강도에 있어서 전단결합강도(SBS)와 인장결합강도(TBS) 및 $75^{\circ}\;와\;90^{\circ}$ peel 결합강도는 Micro-Loc base와 Chessboard base에서 차이 가 없었으며 Non-etched Foil-Mesh base에서 가장 작았고(p<0.05), $0^{\circ},\;15^{\circ},\;30^{\circ},\;60^{\circ}$ peel응력을 적용한 결과 Chessboard base에서 가장 큰 Peel결합강도를, Non-etched Foil-Mesh base에서 가장 작은 결합강도를 보였다(p<0.05).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1073-1077
• /
• 2003

This study aims to investigate the fabrication process of nano silicon mold using electron beam lithography (EBL) to generate the nanometer level patterns by nano-imprinting technology. the nano-patterned mold including 100mm pattern size has been fabricated by EBL with different doses ranged from 22 to 38 ${\mu}C/cm^2$ on silicon using the conventional polymethylmetharcylate(PMMA) resist. The silicon mold is fabricated with various patterns such as circles, rectangles, crosses, oblique lines and mixed forms, The effect of dosage on pattern density in EBL is discussed based on SEM (Scannning Electron Microscopy) analysis of fabricated molds. The mold surface is modified by hydrophobic fluorocarbon (FC) thin films to avoid the stiction during nano-imprinting process.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.560-565
• /
• 2008

Plantae of the natural material has been broadly used on cloth dyeing by it's specific properties such as eco-friendly and innoxious. However dyeing with natural material on synthetic fiber is nearly impossible due to poor affinity between natural material and synthetic fiber. The method which is binding with micro-capsulized natural material to cloth, used in this study, has low change on quality by external influence. Also this method has high ability in spray effect by broken capsule which comes to pressure and friction when the treated cloth was dressed. And this method is applicable widely from natural fiber to synthetic fiber. The purpose of this study is to develop the multi-functional synthetic material with micro-capsulized Ginseng on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dyeability showed a little bit low exhaustion but the PET treated by micro-capsule was more or less better than the dip dyed PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness were revealed some different grades by each condition but showed high level, in most and the micro-capsulized PET was more improver than regular dip dyed PET.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.320-327
• /
• 2002

In concert with the growing emphasis placed on distributed power generation there will be a need, in the first decade of the 21th century, for a compact thermal energy system capable of providing the total energy needs of individual homes. A natural gas fueled co-generation micro-turbine with ultra low emission will meet this need. Market opportunities for a distributed micro turbine co-generation system are projected to increase dramatically. In this paper, It was determined that with current state of art component performance levels, metrallic materials, thermal efficiency goal of $28\%$ at sea level standard day conditions are attainable. Higher overall thermal efficiency of $78\%$ is attainable with micro-turbine combined with exhaust fired boilers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.876-881
• /
• 2004

In this study, A special quality analysis and experiment for low power consumption type pneumatic on-off micro valve was performed. And flow characteristics of the micro valve by stroke change was numerically investigated. As a result, it is shown that magnetic force(2.4N) is exerted enough to move poppet with 0.3mm stroke with 0.01 seconds of response time, and that there is no magnetic force emitted by yoke. Under the condition of poppet stroke smaller than about 0.8mm, dynamic pressure acts to poppet wall up to supply pressure level. But, that is decreasing to 40% when poppet stroke is 0.8mm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.490-493
• /
• 2004

There is great difficulty in machine below 10 micrometers by conventional machining methods, such as micro-EDM. However, ultra micro machining using focused ion beam(FIB) is able to machine to 50 nanometers. Bie ＆ moulds techniques are better than one-to-one machining techniques in regards to production costs in the mass production of ultra size structures. Also, it is advantageous to machine die ＆ moulds to the 10 micrometers level by FIB technique rather than other techniques. It is difficult to machine the three dimensional machining, such as micro lens, using FIB system because of their machining characteristics. In this paper, three dimensional machining techniques were properly introduced, and also experiments showed effectiveness of their techniques.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.1-7
• /
• 2006

LCD 백라이트의 효율을 향상시키기 위하여 배열형 소형 프레넬 렌즈(micro Fresnel lens array)가 결합된 도광판을 설계하였다. 배열형 소형 프레넬 렌즈(MFLA)는 blazed 형태 및 다단계 이진 형태를 채택하였다. MFLA는 기존 LCD 백라이트 장치에서 필요로 했던 프리즘판 및 확산판을 대체할 수 있다. MFLS가 적용된 도광판의 성능을 나타내기 위하여 휘도와 균일도 값 등을 계산하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권21호
• /
• pp.9059-9064
• /
• 2014

MicroRNAs (miRNAs) are ubiquitously expressed small, non-coding RNAs that negatively regulate gene expression at a post transcriptional/translational level. They have emerging as playing crucial roles in cancer at all stages ranging from initiation to metastasis. As a tumor suppressor miRNA, aberrant expression of microRNA-29b (miR-29b) has been detected in various types of cancer, and its disturbance is related with tumor development and progression. In this review, we summarize the latest findings with regard to the tumor suppressor signatureof miR-29b and its regulatory mechanisms. Our review highlights the diverse relationships between miR-29b and its target genes in malignant tumors.