• 한국지능시스템학회논문지
• /
• 제26권5호
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.17-24
• /
• 2013

In this study, we consider the characteristics of channel flow in the presence of an infinite streamwise array of equispaced identical rotating circular cylinders. This flow configuration can be regarded as a model representing a micro channel or an internal heat exchanger with cylindrical vortex generators. A numerical parametric study has been carried out by varying Reynolds number based on the bulk mean velocity and the cylinder diameter, and the gap between the cylinders and the channel wall for some selected angular speeds. An immersed boundary method was employed to facilitate implementing the cylinders on a Cartesian grid system. No-slip condition is employed at all solid boundaries including the cylinders, and the flow is assumed to be periodic in the streamwise direction. The presence of the rotating circular cylinders arranged periodically in the streamwise direction causes a significant topological change of the flow, leading to increase of mean friction on the channel walls. More quantitative results as well as qualitative physical explanations are presented to justify the effectiveness of rotating cylinders to modify flow topology, which might be used to enhance heat transfer on the channel walls.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.311-316
• /
• 2001

This paper presents that the affecting factors to the solderability and initial reliability. It is the factor that the coefficient of thermal expansion between package and PCB(Printed Circuit Board), the quantity of solder paste and reflow condition, and Au thickness of the solder ball pad on polyimide tape. As the reflow soldering condition for 48 ${\mu}BGA$ is changed, it is estimated that the quantity of Au diffusion at eutectic Sn-Pb solder surface and initial bonding strength of eutectic Sn-Pb solder and lead free solder. It is the result that quantitative measurement of Au diffusion quantity is difficult, but the shear strength of eutectic Sn-Pb solder joint is 842 mN at first reflow and increases 879 mN at third reflow. The major failure mode in solder is judged solder fracture. So, Au diffusion quantity is more affected by reflow temperature than by the reflow times.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.29-34
• /
• 2018

ESS가 연계된 시스템은 24시간 충 방전 스케줄링을 수행되어야 하므로 시스템이 중단되지 않고 운영, 관리되어야 하며, 전력 IT설비의 고장 발생이나 통신장애가 발생된 경우라도 ESS시스템의 스케줄링이 정상적으로 이루어져야 한다. 따라서, 다양한 장애가 발생하더라도 이를 능동적으로 대처하여 고정밀의 전력데이터를 수집, 관리하고 ESS 시스템을 제어하는 시스템이 요구되고 있다. 본 논문에서는 태양광 발전설비와 연계된 ESS 시스템을 대상으로 통신 장애 발생을 대처하는 통신 이중화된 전원관리유닛과 마이크로그리드 사이트 관리, 유지보수 및 모니터링을 수행할 수 있는 통합 관리 시스템을 제안한다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.27-34
• /
• 2001

The BGA Package has been the area array package of choice for several rears. Recently, the transition has been to finer pitch configuration called Chip Scale Packages (CSP). Several of these package types are available at 0.5 mm pitch, requiring surface mount assemblers to evaluate and optimize various elements of the assembly process. This presentation describes the issues associated with making the transition from BGA to CSP assembly. Areas addressed will include the accuracy of pick and piece equipment, printed wiring board lines and spaces, PWB vias, in-circuit test issues, solder paste printing, moisture related factors, rework and reliability. The transition to 0.5 mm pitch requires careful evaluation of the board design, solder paste selection, stencil design and component placement accuracy. At this pitch, ball and board pad diameters can be as small as 0.25 mm and 0.20 mm respectively. Drilled interstitial vias are no longer possible and higher ball count packages require micro-via board technology. The transition to CSP requires careful evaluation of these issues. Normal paste registration and BGA component tolerances can no longer achieve the required process levels and higher accuracy pick and place machines need to be implemented. This presentation will examine the optimization of these critical assembly operations, contrast the challenges at 0.5 mm and also look at the continuation of the process to incorporate smaller pitch flip chip devices.

• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.577-586
• /
• 2011

본 논문에서 DC 마이크로그리드의 동작분석을 위한 하드웨어 시뮬레이터의 개발에 관해 기술하고 있다. 이 하드웨어 시뮬레이터는 분산전원으로 풍력발전, 태양광 발전, 연료전지를, 그리고 에너지저장으로 슈퍼커패시터, 배터리를 포함하고 있다. 또한 전체시스템의 에너지관리와 상태모니터링을 수행하는 중앙제어기를 포함하고 있어 이더넷을 기반으로 한 통신을 통해 각 분산전원과 에너지저장에 탑재된 하위제어기와 연계되어있다. 개발한 하드웨어 시뮬레이터는 실제 상황을 고려한 DC 마이크로그리드의 성능분석에 활용될 것으로 기대된다.

• 한국광학회지
• /
• 제24권2호
• /
• pp.53-57
• /
• 2013

본 논문에서는 금속 슬릿 배열로 구성된 편광 선택 가능한 블레이즈드 회절 격자를 제안한다. 마이크로 스케일의 블레이즈드 회절 격자를 디자인 하고 이 구조에 추가적으로 나노스케일의 금속 슬릿 구조를 적용하여 편광 선택기능을 부여하였다. 이 소자에 대하여 사례 연구로 예를 디자인하여 FDTD(Finite Difference Time Domain method)방법을 이용한 전산모사를 통해 성능을 검증해 보았다. 임의의 디자인 사례에 대해 대략 77.61% 의 회절효율과 8.99의 편광선택비가 얻어졌으며 편광선택비를 높이기 위한 또 다른 디자인에서는 64.22%의 회절효율과 81.09의 편광선택비가 얻어졌다.

• 전력전자학회논문지
• /
• 제16권4호
• /
• pp.342-350
• /
• 2011

본 논문에서는 분산전원으로 풍력과 태양광, 에너지저장으로 배터리, 직류부하, 그리고 교류연계전력망으로 구성된 직류 마이크로그리드에서 Droop 제어를 기반으로 한 시스템의 자율동작을 분석한 내용에 대해 기술하고 있다. 자율동작의 분석을 위해 먼저 PSCAD/EMTDC 소프트웨어를 이용해 각 분산전원과 배터리의 시뮬레이션 모델을 개발하고 이를 바탕으로 Droop 제어를 검증하였다. 또한 시뮬레이션 결과를 바탕으로 3kW급 DC마이크로그리드의 하드웨어를 제작하여 실제적인 자율동작의 타당성을 분석하였다.

• Advances in Energy Research
• /
• 제3권2호
• /
• pp.81-95
• /
• 2015

Microgrid, which can be considered as an integration of various dispersed resources (DRs), is characterized by number of DRs interfaced through the power electronics converters. The microgrid comprising these DRs is often operated in an islanded mode. To minimize the cost, reduce complexity and increase reliability, it is preferred to avoid any communication channel between them. Consequently, the droop control method is traditionally adopted to distribute active and reactive power among the DRs operating in parallel. However, the accuracy of distribution of active and reactive power among the DRs controlled by the conventional droop control approach is highly dependent on the value of line impedance, R/X i.e., resistance to reactance ratio of the line, voltage setting of inverters etc. The limitations of the conventional droop control approach are demonstrated and a modified droop control approach to reduce the effect of impedance mis-match and improve the time response is proposed. The error in reactive power sharing is minimized by inserting virtual impedance in line with the inverters to remove the mis-match in impedance. The improved time response is achieved by modifying the real-power frequency droop using arctan function. Simulations results are presented to validate the effectiveness of the control approach.

• 적정기술학회지
• /
• 제5권1호
• /
• pp.8-17
• /
• 2019

Solar pumps, for water lift systems, is becoming popular in rural areas for supplying drinking water in dry seasons when its need is elevated. The development in technology has also made solar pumps readily available and cheap which has increased its demands. So, for scattered settlements having a limited budget for operation and maintenance costs, solar pump is preferred over grid connected electrical pumping systems. This primary objective of the study was to design a solar photovoltaic pumping drinking water supply system for a small health post which is about 45 km east from Kathmandu, the capital city of Nepal. The study also compared and verified the final design with the system's existing design prepared by a development agency. The water source for this study was a confined aquifer 115m below the surface. The water demand was calculated to be 11m³ per day. A 1500 kPa submersible pump attached to a motor was selected and installed. Along with that twelve solar panels, reservoir, transmission main and distribution main was designed. The outcomes conclude solar photovoltaic pumping water supply systems to be cost-effective with an estimated cost of only USD 0.84 million per MLD. Solar pumps require low maintenance and operation costs and its repairs can quickly be done by the local people. The study also shows that solar technology produces no sound, needs no fuel making it environmentally friendly.