• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.181-187
• /
• 2014

Micro patterns are used to maximize the performance and efficiency of the product in many industries such as energy, display, printing, biology, etc. Nowadays, the fabrication technology for micro patterns has been developed in various ways such as photolithography, laser machining, electrical discharge machining and mechanical machining. Recently, mechanical machining the size of smaller than 1 micrometer could be tried, because the technology related to the machining was developed brilliantly. This paper shows the experiments using cutting processes in order to fabricate the micro pattern. Micro patterns of the size of several micrometers were machined by the diamond tools of two different shape, the deformation and generation of burr were investigated.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.799-804
• /
• 2012

Recently micro-nano structures has widely been reported to improve the performance of waterproof, heat isolation, sound and light absorption in various fields of electric devices such as mobiles, battery, display and solar panels. A lot of micro-sized holes on the surface of thin film provide excellent sound, or heat, or light transmission efficiency more than solid film and simultaneously nano-sized protrusions around micro hole increase the hydrophobicity of the surface of thin film because of lotus leaf effects as generally known previously. In this paper new rapid fabrication process with 355 nm UV laser ablation was proposed to get micro-nano structures on the surface of thin film, which have only been observed at higher laser fluence. Developed thin micro-nano structured film was also investigated the hydrophobic property by measuring the contact angle and demonstrated the possibility to apply to water droplet separation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.648-650
• /
• 2008

We used micro-contact printing for source and drain electrodes of OTFTs. The proper solvent of Ag paste and baking temperature were extracted for PVP gate dielectric and pentacene semiconductor. The mobility was 0.025 cm2/V.sec and on/off ratio was $2{\times}10^5$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1149-1152
• /
• 2008

Nitride semiconductor based light-emitting diodes attain a new functionality of polychromatic emission by the use of three-dimensionally faceted microstructures, which may lead to an advanced lighting technology in which the light source spectra are synthesized so as to meet requirements of the application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.998-1000
• /
• 2005

We report the development of the equipment that can measure the transmittance of the polarizer for TFTLCD application versus azimuth angle of the linear polarization at each micro spot in the section, and therefore measure the degree of iodine permeation and alignment quantitatively at each area of the section.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.388-390
• /
• 2003

Paste micro-injection molding process was applied for fabrication of barrier ribs of PDP in an attempt to reduce processing steps and materials loss during the processing. For the paste, a thermally curable one was used and for the mold, a polymeric soft mold was used. It was demonstrated that the micro-molding process can be used successfully in producing barrier ribs of PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.774-777
• /
• 2005

In this work, a soft embossing method is proposed to fabricate microgrooves on polyimide surfaces. Apply these resulting patterned micro-grooved polyimide surfaces as the liquid crystal alignment layers. The director of liquid crystal molecules aligns perfectly along the direction of microgrooves.

• Journal of Powder Materials
• /
• v.13 no.3 s.56
• /
• pp.211-216
• /
• 2006

In an attempt to reduce processing cost and to improve resolution of PDPs, micro mold transfer processing route for barrier ribs of plasma display panel was attempted. In this study, the parameters that may cause defects during the process were identified, which include the shrinkage during UV curing process, stress due to evaporation of organic components, and sintering shrinkage. Considering such parameters, UV curable paste was developed and barrier ribs of PDPs were successfully processed via the process. This work demonstrated the possibility of build-up route in manufacturing barrier ribs of PDP.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.25-29
• /
• 2004

Effects of additing various types of ceramic fillers to the BZB-based glass on the thermo-chemical stability, optical reflectance, and mechanical properties were investigated. The glass system demonstrated the feasibility to host various types of ceramic fillers to form micro-composites at the processing temperature suitable for PDP systems. The optical reflectance and mechanical strength of the filler-glass composites were improved as compared to the glass itself. These results demonstrate the feasibility of applying the Pb-free BZB-based glass system as a matrix for employing various types of crystalline ceramic fillers to be used as barrier rib materials in plasma display panels.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.32-41
• /
• 2019

We propose a speckle reduction technique in electronic holographic display systems, where digital micro-mirror array devices are used as spatial light modulators. By adopting a programmable filtration in a general 4-f optic configuration, it is shown that the signal spectrum components in the frequency domain of a viewing-window-based holographic display system can be selectively filtered. Compared to the widely utilized single-sideband filtration techniques in electronic holographic display systems, our proposed programmable filtration can be utilized to effectively reduce the speckles in the reconstruction of point-cloud-based computer-generated holograms. Experimental results are presented to verify our proposed concept.