한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제31권3호
  • /
  • Pages.181-187
  • /
  • 2014
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

다이아몬드 공구를 이용한 미세 홈 가공

Micro Groove Cutting Using Diamond Tools

  • 최영재 (한국생산기술연구원 IT 융합공정연구실용화그룹) ;
  • 송기형 (한국생산기술연구원 IT 융합공정연구실용화그룹) ;
  • 이석우 (한국생산기술연구원 IT 융합공정연구실용화그룹) ;
  • 최헌종 (한국생산기술연구원 IT 융합공정연구실용화그룹)
  • Choi, Young Jae (IT Converged Process R&BD Group, Korea Institute of Industrial Technology) ;
  • Song, Ki Hyeong (IT Converged Process R&BD Group, Korea Institute of Industrial Technology) ;
  • Lee, Seok Woo (IT Converged Process R&BD Group, Korea Institute of Industrial Technology) ;
  • Choi, Hon Zong (IT Converged Process R&BD Group, Korea Institute of Industrial Technology)
  • 투고 : 2014.02.05
  • 심사 : 2014.02.22
  • 발행 : 2014.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Micro patterns are used to maximize the performance and efficiency of the product in many industries such as energy, display, printing, biology, etc. Nowadays, the fabrication technology for micro patterns has been developed in various ways such as photolithography, laser machining, electrical discharge machining and mechanical machining. Recently, mechanical machining the size of smaller than 1 micrometer could be tried, because the technology related to the machining was developed brilliantly. This paper shows the experiments using cutting processes in order to fabricate the micro pattern. Micro patterns of the size of several micrometers were machined by the diamond tools of two different shape, the deformation and generation of burr were investigated.

키워드

참고문헌

  1. Yan, J., Oowada, K., Zhou, T., and Kuriyagawa, T., "Precision Machining of Microstructures on Electroless-plated NiP Surface for Molding Glass Components," J. Mater. Process. Technol., Vol. 209, No. 10, pp. 4802-4808, 2009. https://doi.org/10.1016/j.jmatprotec.2008.12.008
  2. Takeuchi, Y., Maeda, S., Kawai, T., and Sawada, K., "Manufacture of Multiple-focus Micro Fresnel Lenses by Means of Nonrotational Diamond Grooving," CIRP Ann. - Manuf. Technol., Vol. 51, No. 1, pp. 343-346, 2002. https://doi.org/10.1016/S0007-8506(07)61532-7
  3. Tamagawa, Y. and Ichioka, Y., "Efficiency of Blazed Diffractive Optics Produced by Diamond Turning," Optical Review, Vol. 5, No. 5, pp. 291-294, 1998. https://doi.org/10.1007/s10043-998-0291-6
  4. Blough, C. G., Rossi, M., Mack, S. K., and Michaels, R. L., "Single-Point Diamond Turning and Replication of Visible and Near-infrared Diffractive Optical Element," Applied Optics, Vol. 36, No. 20, pp. 4648-4654, 1997. https://doi.org/10.1364/AO.36.004648
  5. Riedl, M. J., "Diamond-Turned Diffractive Optical Elements for the Infrared," Proc. of SPIE, Vol. 2540, pp. 257-268, 1995.
  6. Kuwano, R., Koga, T., Tokunaga, T., Wakayama, T., Otani, Y., and Fujii, N., "Ring Beam Shaping Optics Fabricated with Ultra-precision Cutting for YAG Laser Processing," Optical Review, Vol. 19, No. 2, pp. 98-102, 2012. https://doi.org/10.1007/s10043-012-0020-z
  7. Takeuchi, Y., Murota, M., Kawai, T., and Sawada, K., "Creation of Flat-End V-Shaped Microgrooves by Non-Rotational Cutting Tools," CIRP Ann. - Manuf. Technol., Vol. 52, No. 1, pp. 41-44, 2003. https://doi.org/10.1016/S0007-8506(07)60526-5
  8. Jeon, E. C., Je, T. J., Lee, E. S., Park, E. S., Lee, J. R., Choi, H. J., and et al., "Optimization of Hybrid LED Package System for Energy Saving Based on Micro Machining Technology and Taguchi Method," Int. J. Precis. Eng. Manuf., Vol. 14, No. 6, pp. 1113-1116, 2013. https://doi.org/10.1007/s12541-013-0151-6
  9. Lee, S. W., Lee, D. Y., Song, K. H., Kang, H. C., and Kim, S. J., "Core Technology Development for Micro Machining Process on Large Surface," J. Korean Soc. Precis. Eng., Vol. 28, No. 7, pp. 769-776, 2011.
  10. Duong, T. H., Kim, H. C., Lee, D. Y., Lee, S. W., Park, E. S., and Je, T. J., "A Theorectical Deformation Prediction of Micro Channels in Ultraprecision Machining," Int. J. Precis. Eng. Manuf., Vol. 14, No. 2. pp. 173-181, 2013. https://doi.org/10.1007/s12541-013-0025-y
  11. Chen, S. T., Chang, K. E., Huang, W. P., Yang, H. Y., and Lee, X. M., "Development of a Cost-effective High-precision Bench Machine Tool for Multi-level Micro Aspheric Lighting-lens Mold Machining," Int. J. Precis. Eng. Manuf., Vol. 13, No. 12, pp. 2225-2231, 2012. https://doi.org/10.1007/s12541-012-0295-9
  12. Moriya, T., Nakamoto, K., Ishida, T., and Takeuchi, Y., "Creation of V-shaped Microgrooves with Flat-Ends by 6-axis Control Ultraprecison Machining," CIRP Ann. - Manuf. Technol., Vol. 59, No. 1, pp. 61-66, 2010. https://doi.org/10.1016/j.cirp.2010.03.054
  13. FANUC, "FANUC ROBONANO ${\alpha}$-0iB," http://www.fanuc.co.jp/en/product/robonano/index.html (Accessed 24 Jan. 2014)
  14. A.L.M.T. Corp., "Ultra-Precision Cutting Tool UPCNano Tools," http://www.allied-material.co.jp/english/products/diamond/cutting/upcnano/html (Accessed 24 Jan. 2014)
  15. A.L.M.T. Corp., "Ultra-Precision Cutting Tool UPC," http://www.allied-material.co.jp/english/products/diamond/cutting/upc/html (Accessed 24 Jan. 2014)