• Korean Journal of Food Science and Technology
• /
• v.48 no.6
• /
• pp.560-564
• /
• 2016

The objective of this study was to investigate the anti-Bacillus cereus activity of actinonin. Actinonin inhibited the growth of B. cereus in a dose dependent manner. The growth-inhibitory activity of actinonin was evaluated using a broth micro-dilution method, and minimum inhibitory concentration (MIC) and agar disk diffusion tests. B. cereus showed high susceptibility to actinonin in a concentration-dependent manner and MIC was determined to be $0.192{\mu}g/mL$. Additionally, 1 and 2 mM actinonin induced formation of B. cereus inhibition zones. In addition, as compared to B. cereus alone, B. cereus added with $10{\mu}M$ actinonin showed a lower level of cytotoxicity in HeLa cells in vitro. Thus, this study revealed that actinonin could be a potential source of a natural antimicrobial agent or a pharmaceutical component against B. cereus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.44-45
• /
• 2010

We are currently conducting studies on culturing and biocompatibility assessment of various cells such as neural stem cells and induced pluripotent stem cells(IPS cells) on carbon nanotube (CNT), on nerve regeneration electrodes, and on silicon wafers with a focus on developing nerve integrated CNT based bio devices for interfacing with living organisms, in order to develop brain-machine interfaces (BMI). In addition, we are carried out the chemical modification of carbon nanotube (mainly SWCNTs)-based bio-nanosensors by the plasma ion irradiation (plasma activation) method, and provide a characteristic evaluation of a bio-nanosensor using bovine serum albumin (BSA)/anti-BSA binding and oligonucleotide hybridization. On the other hand, the researches in the case of "novel plasma" have been widely conducted in the fields of chemistry, solid physics, and nanomaterial science. From the above-mentioned background, we are conducting basic experiments on direct irradiation of body tissues and cells using a micro-spot atmospheric pressure plasma source. The device is a coaxial structure having a tungsten wire installed inside a glass capillary, and a grounded ring electrode wrapped on the outside. The conditions of plasma generation are as follows: applied voltage: 5-9 kV, frequency: 1-3 kHz, helium (He) gas flow: 1-1.5 L/min, and plasma irradiation time: 1-300 sec. The experiment was conducted by preparing a culture medium containing mouse fibroblasts (NIH3T3) on a culture dish. A culture dish irradiated with plasma was introduced into a $CO_2$-incubator. The small animals used in the experiment involving plasma irradiation into living tissue were rat, rabbit, and pick and are deeply anesthetized with the gas anesthesia. According to the dependency of cell numbers against the plasma irradiation time, when only He gas was flowed, the growth of cells was inhibited as the floatation of cells caused by gas agitation inside the culture was promoted. On the other hand, there was no floatation of cells and healthy growth was observed when plasma was irradiated. Furthermore, in an experiment testing the effects of plasma irradiation on rats that were artificially given burn wounds, no evidence of electric shock injuries was found in the irradiated areas. In fact, the observed evidence of healing and improvements of the burn wounds suggested the presence of healing effects due to the growth factors in the tissues. Therefore, it appears that the interaction due to ion/radicalcollisions causes a substantial effect on the proliferation of growth factors such as epidermal growth factor (EGF), nerve growth factor (NGF), and transforming growth factor (TGF) that are present in the cells.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.4
• /
• pp.454-461
• /
• 2007

Antioxidative and antimicrobial activities were carried out on the Citrus Unshju peel solvent extracts in order to discover new functional activities. The amounts of polyphenol in 70% metanol extract (MtEx) was measured as 836.8 mg% in Citrus Unshju peel. The EDA (electron donating ability) of 0.01, 0.02 and 0.1% MtEx in Citrus Unshju peel were measured as levels of 81.3, 86.0 and 89.6%. The nitrite scavenging effects of Citrus peel were also determined as the levels of 34.4% (pH 1.2) and 19.5% (pH 7.0). The pH of react solution was more acidic, the nitrite scavenging effect was more increased. The order of antioxidatives was shown as TBHQ > BHT > TOC > ChEx > EaEx > EtEx > WaEx > Control in corn germ oil and TBHQ > ChEx > EaEx > BHT > EtEx > WaEx > TOC > Control in canola oil. A number of the extracts were certified to have antimicrobial activities for a small number of micro-organisms, similar gram negative and positive micro-organisms. According to the results above, it was summerized that Citrus Unshju peel had the higher total polyphenol, EDA, nitrite scavenging effects and antimicrobial activities. Also isolated extract from ChEx and EaEx had high antioxidative, these effects were very similar to that of ${alpha}$-tocopherol and BHT. It would be proposed that Citrus peel can become a new natural source for antioxidative agents in future food industry.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.184-184
• /
• 2012

Recently, InGaN/GaN multi-quantum well grown on GaN pyramid structures have attracted much attention due to their hybrid characteristics of quantum well, quantum wire, and quantum dot. This gives us broad band emission which will be useful for phosphor-free white light emitting diode. On the other hand, by using quantum dot emission on top of the pyramid, site selective single photon source could be realized. However, these structures still have several limitations for the single photon source. For instance, the quantum efficiency of quantum dot emission should be improved further. As detection systems have limited numerical aperture, collection efficiency is also important issue. It has been known that micro-cavities can be utilized to modify the radiative decay rate and to control the radiation pattern of quantum dot. Researchers have also been interested in nano-cavities using localized surface plasmon. Although the plasmonic cavities have small quality factor due to high loss of metal, it could have small mode volume because plasmonic wavelength is much smaller than the wavelength in the dielectric cavities. In this work, we used localized surface plasmon to improve efficiency of InGaN qunatum dot as a single photon emitter. We could easily get the localized surface plasmon mode after deposit the metal thin film because lnGaN/GaN multi quantum well has the pyramidal geometry. With numerical simulation (i.e., Finite Difference Time Domain method), we observed highly enhanced decay rate and modified radiation pattern. To confirm these localized surface plasmon effect experimentally, we deposited metal thin films on InGaN/GaN pyramid structures using e-beam deposition. Then, photoluminescence and time-resolved photoluminescence were carried out to measure the improvement of radiative decay rate (Purcell factor). By carrying out cathodoluminescence (CL) experiments, spatial-resolved CL images could also be obtained. As we mentioned before, collection efficiency is also important issue to make an efficient single photon emitter. To confirm the radiation pattern of quantum dot, Fourier optics system was used to capture the angular property of emission. We believe that highly focused localized surface plasmon around site-selective InGaN quantum dot could be a feasible single photon emitter.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.276-284
• /
• 2000

The acoustic emission (AE) behavior of reinforced concrete beams tested under flexural loading was investigated to characterize and identify the source of damage. This research was aimed at identifying the characteristic AE response associated with micro-crack development, localized crack propagation, corrosion, and debonding of the reinforcing steel. Concrete beams were prepared to isolate the damage mechanisms by using plain, notched-plain, reinforced, and corroded-reinforced specimens. The beams were tested using four-point cyclic step-loading. The AE response was analyzed to obtain key parameters such as the time history of AE events, the total number and rate of AE events, and the characteristic features of the waveform. Initial analysis of the AE signal has shown that a clear difference in the AE response is observed depending on the source of the damage. The Felicity ratio exhibited a correlation with the overall damage level, while the number of AE events during unloading can be an effective criterion to estimate the level of corrosion distress in reinforced concrete structures. Consequently, AE measurement characterization appears to provide a promising approach for estimating the level of deterioration in reinforced concrete structure.

• Journal of The Korean Astronomical Society
• /
• v.53 no.1
• /
• pp.9-26
• /
• 2020

At q = 1.81 ± 0.20 × 10^-5, KMT-2018-BLG-0029Lb has the lowest planet-host mass ratio q of any microlensing planet to date by more than a factor of two. Hence, it is the first planet that probes below the apparent "pile-up" at q = 5-10 ×10^-5. The event was observed by Spitzer, yielding a microlens-parallax π_E measurement. Combined with a measurement of the Einstein radius θ_E from finite-source effects during the caustic crossings, these measurements imply masses of the host M_host = 1.14^+0.10_-0.12 M_⊙ and planet M_planet = 7.59^+0.75_-0.69 M_⊕, system distance D_L = 3.38^+0.22_-0.26 kpc and projected separation a_⊥ = 4.27^+0.21_-0.23 AU. The blended light, which is substantially brighter than the microlensed source, is plausibly due to the lens and could be observed at high resolution immediately.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.243-249
• /
• 2001

Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.287-294
• /
• 2005

In this paper, an optical true time-delay (TTD) for two-dimensional (2-D) phased array antennas (PAAs), composed of a multi-wavelength optical source and a fiber optic delay line matrix consisting of $2\times2$ optical switches with optical fiber connected between cross ports, has been proposed. A 2-bit $\times4-bit$ optical TTD for 10-GHz 2-D PAAs has been implemented by cascading a wavelength dependent TTD (WD-TTD) and a wavelength independent TTD (WI-TTD). The unit time delay for WD-TTD and WI-TTD have been chosen as ${\Delta}T=12ps$ and $\Delta\tau=6ps$, respectively. Time delay have been measured at all radiation angles. The maximum delay error for WD-TTD was measured to be 3 ps due to jitter incurred from gain switching. For the case of WI-TTD, error was within ${\pm}\;1\;ps$. The proposed optical TTD for a 2-D PAA has the following advantages: 1) higher gain compared to one-dimensional linear PAAs, 2) stabilization of optical power and wavelength by using a multi-wavelength optical source, and 3) fast beam scan and simple operation due to electronic control of the $2\times2$ optical switches matrix on a column-by-column basis.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.744-750
• /
• 1998

Unlike common device, MEMS(micro-electro-mechanical system) device consists of very small mechanical structures which determine the performance of the device. Because of its small mechanical structure inside. MEMS device is very sensitive to thermal stress caused by CTE(coefficient of thermal expansion) mismatch between its components. Therefore, its characteristics are affected by material properties. process temperature. and dimensions of each layer such as chip, adhesive and substrate. In this study. we investigated the change of the thermal stress in the chip attached to a substrate. With computer-aided finite element method (FEM), the computer simulation of the thermal stress was conducted on variables such as bonding material, process temperature, bonding layer thickness and die size. The commercial simulation program, ABAQUS ver5.6, was used. Subsequently 3-layer test samples were fabricated, and their degree of bending were measured by 3-D coordinate measuring machine. The experimental results were in good agreement with the simulation results. This study shows that the bonding layer could be the source of stress or act as the buffer layer for stress according to its elastic modulus and CTE. Solder adhesive layer was the source of stress due to its high elastic modulus, therefore high compressive stress was developed in the chip. And the maximum tensile stress was developed in the adhesive layer. On the other hand, polymer adhesive layer with low elastic modulus acted as buffer layer, and resulted in lower compressive stress. The maximum tensile stress was developed in the substrate.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.98-107
• /
• 2011

Caries remains prevalent throughout modern society and is the main disease in the field of dentistry. Although studies of this disease have used diverse methodology, recently, X-ray microtomography has gained popularity as a non-destructive, 3-dimensional (3D) analytical technique, and has several advantages over the conventional methods. According to X-ray source, it is classified as monochromatic or polychromatic with the latter being more widely used due to the high cost of the monochromatic source despite some advantages. The determination of mineral density profiles based on changes in X-ray attenuation is the principle of this method and calibration and image processing procedures are needed for the better image and reproducible measurements. Using this tool, 3D reconstruction is also possible and it enables to visualize the internal structures of dental caries. With the advances in the computer technology, more diverse applications are being studied, such automated caries assessment algorithms.