• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.91-96
• /
• 2018

The oleophobic property of surfaces modified with micro-post structures are investigated for a range of micro-post diameter ($11-23{\mu}m$) and pitch ($20-40{\mu}m$). The contact angle of an oil droplet on surfaces with various micro-post dimensions was calculated using the Cassie-Baxter model and did not show a good agreement with the measured contact angle. From measurement, the micro-post with diameter of $23{\mu}m$ and pitch of $32{\mu}m$ was found to have the highest contact angle ($134.3^{\circ}$).

• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.63-74
• /
• 2020

The present research investigates post-buckling behavior of geometrically imperfect tapered curved micro-panels made of graphene oxide powder (GOP) reinforced composite. Micro-scale effects on the panel structure have been included based on strain gradient elasticity. Micro-panel is considered to be tapered based on thickness variation along longitudinal direction. Weight fractions of uniformly and linearly distributed GOPs are included in material properties based on Halpin-Tsai homogenization scheme considering. Post-buckling curves have been determined based on both perfect and imperfect micro-panel assumptions. It is found that post-buckling curves are varying with the changes of GOPs weight fraction, geometric imperfection, GOP distribution type, variable thickness parameters, panel curvature radius and strain gradient.

• Advances in nano research
• /
• 제7권6호
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• 대한기계학회논문집B
• /
• 제37권12호
• /
• pp.1091-1097
• /
• 2013

본 논문은 비 균일적 마이크로 원기둥 배열을 이용한 고성능 냉각 표면에 대해 다루고 있다. 비균일적 원기둥 배열은 원기둥간의 거리 및 배열 규칙이 균일한 종전의 균일 배열과 달리, 두 개의 특성 공극 길이를 갖기 때문에 구조물의 모세관 능력을 획기적으로 향상시킬 수 있다. 본 연구에서는 비 균일적 마이크로 원기둥 배열을 제작하고, 모세관 상승률 실험을 통하여 모세관 능력을 측정하였다. 그리고 수치해석을 통하여 실험 결과를 검증하였고, 비 균일적 원기둥 배열의 모세관 능력 향상 원인에 대해 검토하였다. 실험 및 수치해석 결과, 마이크로 원기둥 배열의 모세관 능력은 배열의 고체 분율에 대한 일의적 함수로 주어지며, 고체 분율이 감소할수록 증가하는 것으로 나타났다. 하지만 고체 분율이 약 0.25 이하로 줄어들면 모세관 능력은 급격히 감소한다.

• Advances in materials Research
• /
• 제8권3호
• /
• pp.219-235
• /
• 2019

This research is devoted to analyzing mechanical-thermal post-buckling behavior of a micro-size beam reinforced with graphene platelets (GPLs) based on geometric imperfection effects. Graphene platelets have three types of dispersion within the structure including uniform-type, linear-type and nonlinear-type. The micro-size beam is considered to be perfect (ideal) or imperfect. Buckling mode shape of the micro-size beam has been assumed as geometric imperfection. Modified couple stress theory has been used for describing scale-dependent character of the beam having micro dimension. Via an analytical procedure, post-buckling path of the micro-size beam has been derived. It will be demonstrated that nonlinear buckling characteristics of the micro-size beam are dependent on geometric imperfection amplitude, thermal loading, graphene distribution and couple stress effects.

• Journal of Acupuncture Research
• /
• 제29권4호
• /
• pp.81-91
• /
• 2012

Objectives : There are numerous methods in treating acne scar. On the contrary there are hardly any cases on treating acne scars through Korean medicine. By observing we compared how much acne scar was treated by scar regeneration acupuncture therapy and micro-needle therapy treatment through observing pre and post case photos, KAGS, KCADI and patient satisfaction. Results : By comparing pre and post procedure through acne scar grade criteria, total of 5 patients showed improvement and could see distinct change in skin comparing case photos. After comparing pre and post procedures, total of 5 patients showed improvements in figures of Korean acne index. 4 patients replied very satisfied and 1 replies satisfied on patient satisfaction survey. Conclusions : After observing patients satisfaction, and comparing case photos, acne scar grade criteria, korean acne index, it can be considered that scar regeneration acupuncture therapy and micro-needle therapy done in our clinic to be valid treatment.

• 대한통합의학회지
• /
• 제3권2호
• /
• pp.9-16
• /
• 2015

Purpose: The purpose of this research was to ascertain the effect of Micro-current on a pain, balance, of knee joint in the patients with degenerative arthritis. Method: The 30 subjects who had micro-current in this research and randomly assigned into two group, an experiment group and a control group. micro-current was applied to 15 subject in the experiment group after general physical therapy. experiment group was applies general therapies and micro-current stimulation. The measurement were analyzed by using SPSS(V.20). In order to compare the post to the amount of pre-changes and post-changes of each group, the paired t-test was used. The difference between the experiment group and the control group was analyzed by using the analysis of convariance. Results: The results of this study were as follows; 1) In VAS measures, the pain point was significantly decreased in both the experimental and the control group. 2) Mc Gill Pain Questionnaire(MPQ), the pain point was significantly decreased in both the experimental and the control group. 3) TUG measures, the second was significantly decreased in both the experimental and the control group. 4) Weight distribution measures, the authority was significantly decreased in both the experimental and the control group. Conclusion: The micro-current is considered a degenerative knee arthritis that can be presented as an effective physical therapy intervention.

• The Journal of Advanced Prosthodontics
• /
• 제8권2호
• /
• pp.101-109
• /
• 2016

PURPOSE. To investigate the void parameters within the resin cements used for fiber post cementation by micro-CT (${\mu}CT$) and regional push-out bonding strength. MATERIALS AND METHODS. Twenty-one, single and round shaped roots were enlarged with a low-speed drill following by endodontic treatment. The roots were divided into three groups (n=7) and fiber posts were cemented with Maxcem Elite, Multilink N and Superbond C&B resin cements. Specimens were scanned using ${\mu}CT$ scanner at resolution of $13.7{\mu}m$. The number, area, and volume of voids between dentin and post were evaluated. A method of analysis based on the post segmentation was used, and coronal, middle and apical thirds considered separately. After the ${\mu}CT$ analysis, roots were embedded in epoxy resin and sectioned into 2 mm thick slices (63 sections in total). Push-out testing was performed with universal testing device at 0.5 mm/min cross-head speed. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Overall, significant differences between the resin cements and the post level were observed in the void number, area, and volume (P<.05). Super-Bond C&B showed the most void formation ($44.86{\pm}22.71$). Multilink N showed the least void surface ($3.51{\pm}2.24mm^2$) and volume ($0.01{\pm}0.01mm^3$). Regional push-out bond strength of the cements was not different (P>.05). CONCLUSION. ${\mu}CT$ proved to be a powerful non-destructive 3D analysis tool for visualizing the void parameters. Multilink N had the lowest void parameters. When efficiency of all cements was evaluated, direct relationship between the post region and push-out bonding strength was not observed.

• 전산구조공학
• /
• 제3권4호
• /
• pp.35-36
• /
• 1990

오늘날 유한요소해석 결과를 컴퓨터 그래픽을 활용하여 일목요연하게 후처리 함은 일반화 되어 있다. 그래픽을 이용하면 해석된 많은 수치 출력대신에 이해하기 쉬운 도면의 형태로 해석결과를 분석하거나, 모델의 기하학적 형태를 검토할 수 있게 되므로 시간과 노력을 대폭 절감할 수 있다. 그러나, 최근까지 유한소요 후처리는 대형컴퓨터와 이에 종속되는 고가의 도화처리 장비에 의존하여 왔다. 유한요소법을 이용한 해석시 발생하는 많은 수치출력을 고가의 도화장비가 아닌 저가의 도화장비에 출력하고자 하는 노력의 결과로 PC용 그래픽후처리 프로그램인 MICRO-POST가 개발되었다.

• 전산구조공학
• /
• 제2권4호
• /
• pp.69-77
• /
• 1989

최근까지만해도 유한요소 모델의 그래픽 후처리는 주로 대형컴퓨터와 이에 수반되는 고가의 도화장비에 의존할 수 밖에 없었다. 그러나 우수한 그래픽 기능을 갖춘 저렴한 소형컴퓨터의 등장에 힘입어 대단히 경제적인 후처리 그래픽 프로그램인 MICRO-POST가 개발되었다. 이 프로그램을 이용하여 무제한 요소망으로 이루어진 대형 유한요소 모델의 기하형태나 해석결과를 각종 저가의 도화장비에 호환하여 도화처리할 수 있게 되었다. 본 논문에는 도화장비의 호환을 위한 프로그램 절차와 프로그램의 구성 및 그 기능들을 기술하였다. 또한 소형컴퓨터의 메모리 용량 극복을 위한 효율적인 I/O 기법과 도화처리를 교호 작용하면서 관리할 수 있는 대화형식의 입력방식도 기술하였다. 범용 유한요소해석 프로그램에 접속시킨 이용사례를 통하여 프로그램의 효율성을 입증하였다.