• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.88-93
• /
• 2005

The functional vice (Oryza sativa L.) has been highly regarded recently, in the change of rice maykets in the world. Goami2 (GA), one of the functional rice varieties, was developed from high-quality rice, Ilpumbyeo (IP). From the previous study, GA has been proved its beneficial effect on the improvement of metabolic control and body weight reduction especially in obesity, We could certain that GA was very difficult to be gelatinized due to the micro lump shown in the Scanning electron micrographs (SEM) photos. To improve its cooking quality, we investigated the changes of physicochemical properties, which were differentiated by the conditions of milling and blending. As GA was milled every $2\%$ until eliminating $12\%$, the nitrogen content was decreased linearly. But the decreasing rate of nitrogen content of GA during milling process was relatively lower than that of IP. Thus, we assumed that GA has relatively high nitrogen in inner starch of grain. The degree of milling had no effect on the gelatinization of cooked GA, but affected lightness and whiteness linearly, which were ranged in normal values when the rice was milled more than $10\%$ in weight. So we could concluded that the milling process was not proper to improve cooking quality of GA. And we could suggested that GA was needed to soak into water at least one hour before cooking by it water absorption rate at normal temperature$(21^{\circ}C)$ and sensory evaluation. From the texture analysis, cooked GA had higher hardness than other varieties. Therefore, we blended GA with IP, Baekjinju(BJ) and Hwasunchalbyeo(HS), then subjected to sensory evaluation. All evaluation items including the sensory preference were the highest scores for the rice blended with glutinous rice varieties, BJ and HS.

• Korean Journal of Ecology and Environment
• /
• v.49 no.3
• /
• pp.208-214
• /
• 2016

We analyzed research trend and public perception related with tap water to identify major factors affecting low consumption of tap water. 805 research articles were collected for text mining analysis and 1,000 on-line questionnaires were surveyed to find social variables influencing tap water intake. Based on the word network analysis, research topics were divided into 4 major categories, 1) drinking water quality, 2) water fluoridation, 3) residual chlorine, and 4) micro-organism management. Compared with these major research topics, scientific studies of drinking behavior, or social perception were rather limited. 22.4% of total respondents used tap water as drinking water source, and only 1% drank tap water without further treatments (i.e. boiling, filtering). Experience of quality control report (B=0.392, p=0.046) and level of policy trust (B=1.002, p<0.0001) were influential factors on tap water drinking behavior. Age (B=0.020, p=0.002) and gender (B= - 1.843, p<0.0001) also showed significant difference. To increase the frequency of drinking the tap water by social members, the more scientific information of tap water quality and the water policy management should be clearly shared with social members.

• Journal of Technologic Dentistry
• /
• v.32 no.3
• /
• pp.195-207
• /
• 2010

Purpose: The purpose of this study was to observe the microstructural changes of surface in the specimens, performing the shear bond strength testing. The currently most used non-precious alloys are nickel-chromium based alloys with or without beryllium. However, their biocompatibility has been questioned concerning possible damages to the health of the patient and professionals involved in the fabrication of prosthesis caused by long exposure to Ni and Be. An option to nickel-chromium alloys is the cobalt-chromium alloy, an alternative that does not sacrifice the physical properties of the metal porcelain systems. Studies in the animals substantially show that the cobalt-chromium alloys are relatively well tolerated, being therefore more biocompatible than the nickel-chromium alloys. Methods: Non-addition Be to nickel-chromium based alloy(Bellabond plus) and cobalt-chromium alloy which has been widely used(Wirobond C) fused with ZEO light porcelain classified control group and cobalt-chromium alloy which is developing alloy of Alphadent company in Korea(Alphadent alloy) fused with ZEO light porcelain classified experimental group. The specimens of $4mm{\times}4mm{\times}0.5mm$ were prepared as-cast and as-opaque to cast body to analyze the mechanical characteristic change, the microstructure of alloy surface. The phase change was used to observe through XRD analysis and OM/SEM was used to observe the surface of specimens as-cast and as-opaque to cast body. Chemical formation of their elements was measured with EDS. Then hardness was measured with Micro Vicker's hardness tester. Shear bond strength test thirty specimens of $10mm{\times}10mm{\times}2mm$ was prepared, veneered, 3mm high and 3mm in diameter, over the alloy specimens. The shear bond strength test was performed in a universal testing machine(UTM) with a cross head speed of 0.5mm/min. Ultimate shear bond strength data were analyzed with one-way ANOVA and the Scheffe's test (P<0.05). Within the limits of this study, the following conclusions were drawn: The X-ray diffraction analysis results for the as-cast and as-opaque specimens showed that the major relative intensity of Bellabond plus alloy were changed smaller than Wirobond C and Alphadent Co-Cr based alloys. Results: Microstructural analysis results for the opaque specimens showed all the alloys increased carbides and precipitation(PPT). Alphadent Co-Cr based alloy showed the carbides of lamellar type. The Vickers hardness results for the opaque specimens showed Wirobond C and Alphadent Co-Cr based alloys were increaser than before ascast, but Bellabond plus alloy relatively decreased. The mean shear bond strengths (MPa) were: 33.11 for Wirobond C/ZEO light; 25.00 for Alphadent Co-Cr alloy/ZEO light; 18.02 for Bellabond plus/ZEO light. Conclusion: The mean shear bond strengths for Co-Cr and Ni-Cr based alloy were significantly different. But the all groups showed metal-metal oxide modes in shear bond strengths test at the interface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.854-864
• /
• 2016

The use of small drone platform has become a popular topic in these days but its application for SAR operation has been little known due to the burden of the payload implementation. Drone platforms are distinguished from the conventional UAV system by the increased vulnerability to the turbulences, control-errors and poor motion stability. Consequently, sophisticated motion compensation may be required to guarantee the successful acquisition of high quality SAR imagery. Extremely limited power and mass budgets may prevent the use of additional hardwares for motion compensation and the difficulty of SAR focusing is further aggravated. In this paper, we have carried out a feasibility study of mico-SAR drone operation. We present the image acquisition results from the preliminary flight tests and a quality assessment is followed on the experimental SAR images. The in-flight motion errors derived from the unique drone movements are investigated and attempts have been made to compensate for the geometrical and phase errors caused by motions against the nominal trajectory. Finally, the successful operation of drone SAR system is validated through the focussed SAR images taken over test sites.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.529-538
• /
• 2002

There is no adverse opinion on the anticariogenic effect of fluoride, so glass ionomer restoration which release the fluoride is recommended fer child patient. To study the anticariogenic effect of initial carious lesion of fluoride released from adjacent glass ionomer restoration, the in situ model was constructed. A microhardness test, polarized scope investigation and electron probe microanalysis was done for analyzing the distribution of fluoride which was precipitated from glass ionomer restoration to the enamel caries lesion. Fuji IX, the conventional glass ionomer, was used for experimental group and Z-100, composite resin that fluoride was not contained, was used for control group. On the microhardness test, the remineralization was accelerated by fluoride. And on the polarized investigation, the size of caries lesion was reduced in the oral cavity and that phenomenon was accelerated by fluoride, too. Electron probe microanalysis shows that the remineralization was accelerated by fluoride and the fluoride concentration on subsurface area was increased. It maybe that the subsurface area was critical to anticariogenic effect. In summary of these result, initial caries lesion can be remineralized in the oral cavity and that phenomenon can be accelerated by fluoride. The subsurface area of caries lesion was a major part of defense to cariogenic invasion and to conserve the subsurface area, the surface of lesion body have to conserved.

• Journal of Mushroom
• /
• v.15 no.1
• /
• pp.14-20
• /
• 2017

The oyster mushroom cultivation house typically has multiple layers of growing shelves that cause the disturbance of air circulation inside the mushroom house. Due to this instability in the internal environment, growth distinction occurs according to the area of the growing shelves. It is known that minimal air circulation around the mushroom cap facilitates the metabolism of mushrooms and improves their quality. For the purpose of this study, a CFD analysis FLUENT R16 has been carried out to improve the internal environment uniformity of the oyster mushroom cultivation house. It is found that installing a section of the working passage towards the ceiling is to maintain the internal environment uniformity of the oyster mushroom cultivation house. When all the environment control equipment - including a unit cooler, an inlet fan, an outlet fan, an air circulation fan, and a humidifier - were operated simultaneously, the reported Root Mean Square (RMS) valuation the growing shelves were as follows: velocity 23.86%, temperature 6.08%, and humidity 2.72%. However, when only a unit cooler and an air circulation fan operated, improved RMS values on the growing shelves were reported as follows: velocity 23.54%, temperature 0.51%, and humidity 0.41%. Therefore, in order to maintain the internal environment uniformity of the mushroom cultivation house, it is essential to reduce the overall operating time of the inlet fan, outlet fan, and humidifier, while simultaneously appropriately manage the internal environment by using a unit cooler and an air circulation fan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1128-1135
• /
• 2011

This study was conducted to investigate the effect of dietary green tea extract (GTE) on the performance, carcass and gastrointestinal tract (gut) traits, caecal coliform bacteria count, and pH and color (CIE $L^*$, $a^*$, and $b^*$) values of the breast muscle in broilers. A total number of 600 day-old broilers (Ross 308) was allocated to three treatments with four replicates containing 50 (25 males and 25 females) birds. The dietary treatments consisted of the basal diet as the control (0GTE) and diets with GTE at 0.1 (0.1GTE) or 0.2 (0.2GTE) g/kg. Body weights and the feed intake of broilers were measured at 1, 21 and 42 days, the feed intake was measured for different periods and the feed conversion ratio was calculated accordingly. At 42 day four birds per replicate were slaughtered for the determination of carcass and organ weights, caecal coliform bacteria count, and also quality of the breast muscle. The dietary GTE increased the body weight, feed efficiency, carcass weight and dressing percentage and decreased caecal coliform bacteria count of broilers (p<0.05). The 0GTE broilers consumed (p<0.01) less feed than the 0.1GTE birds in the entire experimental period. The relative abdominal fat weight and gut length of broilers in the 0.2GTE were tended to be lower (p<0.07) than those in the 0GTE group. The breast meat from 0.1GTE birds had a lower pH value when compared to that from 0GTE birds. The 0.1GTE broilers had lighter breast meat than 0GTE and 0.2GTE birds. The dietary GTE increased $a^*$ and $b^*$ values of the breast meat. Thus this product appeared to have a measurable impact on CIE color values of the breast meat in broilers. The results of the present study may indicate that the improved production results in the group with added GTE are directly connected with physiological mechanisms such as the regulation of the caecal micro-flora.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.473-484
• /
• 1994

To investigate the effect of resin cement, which had been known to increase the adhesive capacity of the cast gold inlay, on the gingival marginal fit and whether the tin-planting of the beveled area affects the marginal fit, Class II cast gold inlays were made on the 25 sound molars. Control group(ZPC goup) was cemented with the ZPC by conventional method. Experimental groups were cemented with the resin cement(Super-hond & $Panavia_{EX}$) and subdivided further by the existence or nonexistence of the tin-plating of the beveled area(ST & PT groups: with plating, SNT & PNT groups: without plating). So, each group was consisted of 5 teeth and the gingival margin of each specimen was mesiodistally sectioned by 3 times and the marginal and internal gap were evaluated by the Stereo Microscope (${\times}180$) and the Scanning Electron Micrascope(${\times}5,000$) was used for examining the adhesive relationship of the resin cement to the cavity wall and to the cast gold surface. The results were as follows : 1. Marginal gap was less than internal gap in all groups. 2. ZPC and SNT(bevel without tin-plating) groups showed the least gap and gap in PNT(bevel without tin-plating) group, ST(bevel with tin-plating) group, PT(bevel with tin-plating) group showed the greater value in order in evaluation of the both internal gap and marginal gap. 3. With the exception of the relationships between ZPC and SNT groups, ST and PNT groups, relationships between any other groups showed the statistical significance in the internal gap(p<0.05). 4. In the marginal gap, all relationships between groups showed the statistical significance (p<0.05) except the relationships between ZPC and SNT groups, ST and PNT groups, ZPC and PNT groups. 5. ZPC group showed more soluble phenamena than the resin groups(ST, SNT, PT, PNT). 6. Resin cement showed the void spaces in spite of good penetration into the micro-irregularities on both the tooth surface and the cast surface. The void was shown more in PT and PNT groups than in the ST and SNT groups. 7. After the treatment of heat and desiccation for SEM specimen, resin cements were detached more easily from the tooth surface than from the cast surface.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.10-16
• /
• 2019

Semiconductor chip is bonded to the substrate by melting solder bumps. In general, the chip bonding is applied by a Reflow process or a Thermo-Compression(TC) bonding process. In this paper, we introduce a Laser Assisted Thermo-Compression bonding (LATCB) process to improve the anxiety of the existing process(Reflow, TC bonding). In the LATCB process, the chip is bonded to the substrate by irradiating a laser with a uniform energy density in the same area as the chip to melt only the solder bumps and press the chip with a Transparent Compression Module (TCM). The TCM consists of a fused silica header for penetrating the laser and pressurizing the chip, and a piezoelectric actuator (P.A.) coupled to both ends of the header for micro displacement control of the header. In addition, TCM is a structure that can pressurize the chip and deliver it to the chip and solder bumps without losing the energy of the laser. Fused silica, which is brittle, is vulnerable to deformation, so the header may be damaged when an external force is applied for pressurization or a displacement differenced is caused by piezoelectric actuators at both ends. On the other hand, in order to avoid interference between the header and the adjacent chip when pressing the chip using the TCM, the header has a notch at the bottom, and breakage due to stress concentration of the notch is expected. In this study, the thickness and notch length that the header does not break when the external force (500 N) is applied to both ends of the header are optimized using structural analysis and Coulomb-Mohr failure theory. In addition, the maximum displacement difference of the P.A.s at both ends where no break occurred in the header was derived. As a result, the thickness of the header is 11 mm, and the maximum displacement difference between both ends is 8 um.

• The Korean Journal of Pharmacology
• /
• v.23 no.2
• /
• pp.77-85
• /
• 1987

This study was carried out to determine the role of cholinoceptors in the ventrolateral medulla on central control of blood pressure (BP) and heart rate (HR). In rats anesthetized with urethane and paralyzed, microinjections of the neuroexcitatory amino acid L-glutamate (300 ng/site) were performed to functionally identity the vasopressor area (VLPA) and the vasodepressor area (VLDA) in the ventrolateral medulla oblongata. 1. The bilateral microinjection of carbachol (300 ng/site) into the VLPA produced significantly an increase in BP and HR which was not blocked by bilateral pretreatment of hexamethoium ($4\;{\mu}g/site$). 2. The bilateral microinjection of physostigmine (200 ng/site) and oxotremorine (300 ng/site) into the VLPA produced significantly an increase in BP respectively. 3. The bilateral microinjection of atropine ($4\;{\mu}g/site$) into the VLPA produced significantly a decrease in BP and HR. 4. The bilateral micro injection of acetylcholine (500 ng/site) and dimethylphenylpiperazinium (500 ng/site) into the VLDA produced significantly a decrease in BP and HR respectively. 5. The depressor and bradycardiac responses elicited by the bilateral microinjection of acetylcholine (500 ng/site) into the VLDA were blocked by bilateral pretreatment of hexamethonium ($4\;{\mu}g/site$). The results suggest that the activation of cholinoceptors in VLPA produce hypertensive and tachycardiac responses which may be mediated by muscarinic receptors, and the activation of cholinoceptors in VLDA produce hypotensive and bradycardiac responses which may be mediated by nicotinic receptors.