• 정보교육학회논문지
• /
• 제22권2호
• /
• pp.285-295
• /
• 2018

본 연구는 초등학생의 창의력 향상을 위한 교육적 방안으로 마이크로비트를 활용한 소프트웨어 교육 프로그램을 ADDIE 개발 모형을 기반으로 개발하여 적용한 후 효과를 분석하였다. 교육 프로그램은 현직 초등학교 교사 40명을 대상으로 실시한 사전 요구분석 결과를 바탕으로 하여 개발하였다. 개발한 교육 프로그램의 효과를 검증하기 위해 ${\bigcirc}{\bigcirc}$대학교에서 실시한 교육기부 프로그램의 지원자 24명을 대상으로 6일 동안 1일 7차시씩 42차시를 진행하였다. Torrance의 TTCT 검사를 활용하여 사전 사후 검사를 실시하고 교육적 효과를 분석하였으며, 분석 결과, 본 연구에서 개발한 소프트웨어교육 프로그램이 초등학생의 프로그래밍 능력을 향상시켜 창의력 요소들에 긍정적인 영향을 미친다는 것을 알 수 있었다.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.7-13
• /
• 2015

Purpose: We have developed a new method of segmenting the areas of absorbable implants and bone using region-based segmentation of micro-computed tomography (micro-CT) images, which allowed us to quantify volumetric bone-implant contact (VBIC) and volumetric absorption (VA). Materials and Methods: The simple threshold technique generally used in micro-CT analysis cannot be used to segment the areas of absorbable implants and bone. Instead, a region-based segmentation method, a region-labeling method, and subsequent morphological operations were successively applied to micro-CT images. The three-dimensional VBIC and VA of the absorbable implant were then calculated over the entire volume of the implant. Two-dimensional (2D) bone-implant contact (BIC) and bone area (BA) were also measured based on the conventional histomorphometric method. Results: VA and VBIC increased significantly with as the healing period increased (p<0.05). VBIC values were significantly correlated with VA values (p<0.05) and with 2D BIC values (p<0.05). Conclusion: It is possible to quantify VBIC and VA for absorbable implants using micro-CT analysis using a region-based segmentation method.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1041-1046
• /
• 2011

본 연구에서는 레이저 쇼크 피닝으로부터 생성되는 마이크로 충격파를 정량적으로 측정하고 그 특성을 분석하였다. 레이저 쇼크 피닝은 금속 재료에서 압축 응력을 생성시키며 그 크기가 표면에서 극대화되는 특징을 가지고 있다. 펄스 Nd:YAG 레이저를 이용하여 스틸표면에 피닝 공정을 수행하였고 이에 따른 마이크로 충격파의 정량화 및 재료의 기계적 성질 변화에 대해 평가하였다. 실험적 접근으로 피에조소자를 사용하였으며 이를 통한 실제 충격파의 정량화를 제시하였다. 또한 재료 구조 특성, 재료 강도, 인장 시험 등의 기계적 특성을 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1084-1087
• /
• 1997

In this paper, we developed the micro NCT system for punching the thin plates, which is driven is driven by the standalone type microprocessor. In order to adjust the alignment between the punch and die in-situ punching procedures, the non-contact type laser sensor for measuring the burr and micro-driving system for punching die with using the differential screw are developed. The height of burr in four directions in the punched hole of test specimen are measured, and the measured data are transferred to the personal computer by RS232C serial communication technology. In the personal computer, by using the graphic user interface type monitoring program and data handling procedures which includes the filtering algorithms, the direction and length of movement of the die position is decided and these data are transferred back to the microprocessor. The microprocessor drives the micro positioning stage based on these data. Even if this method is not a perfect solution for the in-situ alignment in micro punching, but this alignment methodology is accomplished in the same stage just after the punching that we hope to solve the alignment problem in the punching system based on this technology.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.403-405
• /
• 2000

This paper describes a single transistor type ferroelectric field effect transistor (1Tr FeFET) memory cell scheme, which select one unit memory cell and program/read it. The well voltage can be controlled by isolating the common row well lines. Through applying bias voltage to Gate and Well, respectively, we implement If FeFET memory cell scheme in which interference problem is not generated and the selection of each memory cell is possible. The results of HSPICE simulations showed the successful operations of the proposed cell scheme.

• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.132-136
• /
• 2004

대기중의 NO₂ 가스 농도를 측정하기 위한 마이크로 가스센서를 MEMS 공정을 이용하여 제작하였다. WO₃와 같은 가스 감응물질을 목표 온도까지 가열하기 위해서 마이크로 핫플레이트를 가스센서에 장착하였다. 마이크로 가스센서의 열전달 현상을 상용 열유동 해석 전용 프로그램인 FLUENT를 이용하여 해석하였다. 해석 결과 실리콘 웨이퍼 기판의 온도가 거의 상온에 가까워 핫플레이트에서 발생한 열이 가스 감응물질을 효과적으로 가열하여서 가스감응물질의 열적 고립상태를 유지하고 있는 것을 알 수 있었다. 마이크로 핫플레이트의 형상을 변경함으로써 가스 감지물질의 온도 균일도를 높일 수 있다.

• 대한치과교정학회지
• /
• 제49권4호
• /
• pp.205-213
• /
• 2019

Objective: The aim of this study was to evaluate the amount of tooth movement and histologic changes with different corticotomy designs and micro-osteoperforation in rabbits. Methods: The sample consisted of 24 rabbits divided into three experimental groups (triangular corticotomy [TC] and indentation corticotomy [IC] with flap, and flapless micro-osteoperforations [MP]) and a control. A traction force of 100 cN was applied by connecting the first premolars to the incisors. The amount of tooth movement was measured. Kruskal-Wallis test was used to assess differences in tooth movement between the groups. Micro-computed tomography, hematoxylin and eosin staining, and tartrate-resistant acidic phosphatase (TRAP) analysis were performed. Analysis of variance was applied to assess differences in TRAP-positive osteoclast count between the groups. Results: The amount of tooth movement increased by 46.5% and 32.0% in the IC and MP groups, respectively, while the bone fraction analysis showed 69.7% and 8.5% less mineralization compared to the control. There were no significant intergroup differences in the number of TRAP-positive osteoclasts. Conclusions: The micro-osteoperforation group showed no significant differences in the amount of tooth movement compared to the corticotomy groups, nor in the TRAP-positive osteoclast count compared to both corticotomy groups and control.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.5-11
• /
• 2016

This study analyzed the damage to a slitting knife after cutting steel sheets. Damages to the structure were observed and wear tests were conducted. In addition, the degradation on the damaged and undamaged parts was compared with a micro Vickers hardness test. Weibull statistical analysis was carried out in order to evaluate the reliability of the micro Vickers hardness measured data. Spalling of the edge portion occurred by degradation during use over a long period. Rough parts in the specimens were caused by damage because the slitting knife was used for 1 year. The friction coefficient and wear loss at the damaged parts of the knife edge were slightly larger from shock due to repetitive cutting operation. The micro Vickers hardness followed a two-parameter Weibull probability distribution.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.355-358
• /
• 2003

Recently, micro forming process technology have been developed since the size of machine parts become the crucial factor for minimizing of products in general electronic products. Most small machine parts consist of gear and rotation axis and the wear by mechanical contact is known as the primary factor for life reduction of high precision machine part. Lots of studies for mechanical wear and friction have been reported and many researches of MEMS technology have been studied recently. But just few studies for wear of micro or milli sized machine part have teen implemented. In this research, the wear equation is suggested according to the contact shape of axial part in micro or milli sized machine part. And wear analysis model which can predict the magnitude of wear through this suggested equation with numerical analysis program.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.43-51
• /
• 2010

Speed, accuracy and smoothness are the important properties of pan-tilt camera. In the case of a high ratio zoom lens system, low vibration characteristic is a crucial point in driving pan-tilt mechanism. In this paper, a novel micro-stepping controller with a function of reducing vibration was designed using field programmable gate arrays (FPGA) technology for high zoom ratio pan-tilt camera. The proposed variable reference current (VRC) control scheme reduces vibration decently and optimizing coil current in order to prevent the step motor from occurring missing steps. By employing VRC control scheme, the vibration in low speed could be significantly minimized. The proposed controller can also make very high speed of 378kpps micro-step driving, and increase maximum acceleration in motion profiles.