• Journal of Environmental Impact Assessment
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2019

Global warming becomes a serious issue that poses subsidiary issues like a sea level rise or a capricious climate over the world. Because of severe heat-wave of the summer in Korea in 2016, a big attention has been focused on urban heat island since then. Not just about heat-wave itself, many researches have been concentrated on how to adapt in this trendy warming climate and weather in a small scope. A big part of existing studies is mitigating "Urban Heat Island effect" and that is because of huge impervious surface in urban area where highly populated areas do diverse activities. It is a serious problem that this thermal context has a high possibility causing mortality by heat vulnerability. However, there have been many articles of a green infrastructures' cooling impact in summer. This research pays attention to measure cooling effect of a street planting considering urban canyon and type of green infrastructures in neighborhood scale. This quantitative approach was proceeded by ENVI-met simulation with a spatial scope of a commercial block in Seoul, Korea. We found the dense double-row planting is more sensitive to change in temperature than that of the single-row. Among the double-row planting scenarios, shrubs which have narrow space between the plant and the land surface were found to store heat inside during the daytime and prevent emitting heat so as to have a higher temperature at night. The quantifying an amount of vegetated spaces' cooling effect research is expected to contribute to a study of the cost and benefit for the planting scenarios' assessment in the future.

• The Journal of Korean Philosophical History
• /
• no.58
• /
• pp.245-278
• /
• 2018

The paper has focused on examining the sense of educational process in the light of Xugua zhuan[序卦傳], the Sequence of the Hexagrams as one among Ten Wings in I Ching, particularly on the 11 Iching-hexagrams from ch'ien[乾] to t'ai[泰]. The process involved in this part of the Book of Change can be recognized as both the micro and macro levels, which can eventually leads us to construct the circular system of thought[環相型]. This gives us a possibility to consider the values of education beyond the dualism such as intrinsic and extrinsic as well as traditional and progressive ones. Particularly some crucial defects from child-centered education have been critically examined so that the concept of education can be taken seriously in the light of the teacher-side. Thus this provides us a necessity to dub 'education' as '敎育', not as '兒育' in the Oriental context. As shown in the paper, the cosmic dual forces of I Ching also enables us to dissolve some conflicts arisen in the educational welfare system and situations, and then shows us why we should respect for the teachers' stances though we have to consider the interests of children to be educated. Thus we need to re-examine the content of the Book in the link with the Western systems of educational theory.

• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.270-288
• /
• 2021

We proposed a numerical method to simulate the hydro-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) in the paper. As a part of DECOVALEX-2023 Task G, we verified the method via benchmarks with analytical solutions. DECOVALEX-2023 Task G aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as a group of tetrahedral grains and calculated the interaction of the grains and their interfaces using 3DEC. The micro-parameters of the grains and interfaces were determined by a new methodology based on an equivalent continuum approach. In benchmark modeling, a single fracture embedded in the rock was examined for the effects of fracture inclination and roughness, the boundary stress condition and the applied pressure. The simulation results showed that the developed numerical model reasonably reproduced the fracture slip induced by boundary stress condition, the fracture opening induced by fluid injection, the stress distribution variation with fracture inclination, and the fracture roughness effect. In addition, the fracture displacements associated with the opening and slip showed good agreement with the analytical solutions. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.141-150
• /
• 2022

Responding to the increasing demand for research on seismic resistance of structures triggered by a large-scale earthquake in Korea, the Ministry of the Interior and Safety revised the typical application of the existing seismic design standards with the national seismic performance target enhanced. Therefore, in this paper, the dam body of the aged Test-Bed and the penstock with fluid were modeled by the three-dimensional finite element method by introducing several variables. The current seismic design standard law confirmed the safety of the dam structure and penstock against seismic waves. As a result of the 3D finite element analysis, the stress change due to the water impact of the penstock was minimal, and it was confirmed that the effect of the hydraulic pressure was more significant than the water impact in the earthquake situation. When the hydrostatic pressure is in the form of SPH, it was analyzed that the motion of the fluid and the location of stress caused by the earthquake can be effectively represented, and it will be easier to analyze the weak part. As a result of the analysis, which considers penstock's corrosion, the degree of stress dispersion gets smaller because the penstock is embedded in the body. The stress result is minimal, less than 1% of the yield stress of the steel. In addition, although there is a possibility of micro-tensile cracks occurring in the inlet of the dam, it has not been shown to have a significant effect on the stress increa.

• Conservation Science in Museum
• /
• v.26
• /
• pp.67-82
• /
• 2021

Two golden beads (Buyeo 5336) housed at the Buyeo National Museum were discovered in 1993 near the site of an ancient workshop in Neungsan-ri in Buyeo-gun, Chungcheongnam-do Province. These rare examples from the Baekje Kingdom of an application of granulation have maintained their original form intact, and thus serve as important materials for the investigation of production techniques applied. This study analyzed the composition of the golden beads using a portable X-ray fluorescence analyzer, a stereo microscope, and a scanning electron microscope with an energy dispersive X-ray spectrometer. The manufacturing technique was examined through the observation of the micro-shape and the surface condition and by a composition analysis of the joint part. In both beads, a hole was pierced in a hollow body and the bead was decorated with golden wires around the hole and gold granules in other parts. In some areas, golden granules had been attached to the gold plate and golden wires were then placed over the granules. The purity of both the wires and the granules was analyzed as 23.6 - 23.7K. A high copper content was detected in some of the parts where the granules were attached. The findings of a previous reproduction experiment and study of production methods suggest that the beads were made using the copper diffusion technique.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.593-609
• /
• 2021

We proposed a numerical method for the thermo-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) and simulated thermally induced fracture slip. The present study is the benchmark simulation performed as part of DECOVALEX-2023 Task G, which aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as an assembly of Voronoi grains and calculated the interaction of the grains (blocks) and their interfaces (contacts) using a distinct element code, 3DEC. Based on an equivalent continuum approach, the micro-parameters of grains and contacts were determined to reproduce rock as an elastic material. Then, the behavior of the fracture embedded in the rock was characterized by the contacts with Coulomb shear strength and tensile strength. In the benchmark simulation, we quantitatively examined the effects of the boundary stress and thermal stress due to heat conduction on fracture behavior, focusing on the mechanism of thermally induced fracture slip. The simulation results showed that the developed numerical model reasonably reproduced the thermal expansion and thermal stress increment, the fracture stress and displacement and the effect of boundary condition. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

• Journal of The Korean Astronomical Society
• /
• v.55 no.5
• /
• pp.173-194
• /
• 2022

We complete the survey for finite-source/point-lens (FSPL) giant-source events in 2016-2019 KMTNet microlensing data. The 30 FSPL events show a clear gap in Einstein radius, 9 𝜇as < 𝜃_E < 26 𝜇as, which is consistent with the gap in Einstein timescales near t_E ~ 0.5 days found by Mróz et al. (2017) in an independent sample of point-source/point-lens (PSPL) events. We demonstrate that the two surveys are consistent. We estimate that the 4 events below this gap are due to a power-law distribution of free-floating planet candidates (FFPs) dN_FFP/d log M = (0.4 ± 0.2) (M/38 M_⊕)^-p/star, with 0.9 ≲ p ≲ 1.2. There are substantially more FFPs than known bound planets, implying that the bound planet power-law index 𝛾 = 0.6 is likely shaped by the ejection process at least as much as by formation. The mass density per decade of FFPs in the Solar neighborhood is of the same order as that of 'Oumuamua-like objects. In particular, if we assume that 'Oumuamua is part of the same process that ejected the FFPs to very wide or unbound orbits, the power-law index is p = 0.89 ± 0.06. If the Solar System's endowment of Neptune-mass objects in Neptune-like orbits is typical, which is consistent with the results of Poleski et al. (2021), then these could account for a substantial fraction of the FFPs in the Neptune-mass range.

• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2021

This study proposes the design and implementation of a low-cost emergency ventilator which can be helpful during the COVID-19 pandemic where the supply of automatic ventilators is not smooth compared with the urgent demand worldwide. Easy implementation and lower price were made possible by using AMBU-bag and off-the-shelf embedded micro-controller board. Moreover, while 3D printing is used by companies and experts around the world to build prototype hardware, materials which are readily available from surrounding environments so that people in countries where it is difficult to access many advanced technologies could manufacture the system. The design features AMBU-bag automation, not use 3D printing, and it can contrl speed. By allowing speed control, ventilation can be performed according to the conditions of the patient being used. A complementary point in the study is that it is difficult to fix the start point of the wiper motor used first. A method for complementing this is a method for replacing the brush DC motor with a position feedback function. Secondly, the AMBU-bag may wear out in the long-term process of compressing the AMBU-bag because the arm and the fixing frame are made of wood. To complement this, the part of fixing frame and arm parts that the AMBU-bag touches need to be wrapped in a material such as silicon to minimize friction.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.2
• /
• pp.136-143
• /
• 2015

Gotjawal areas have the unique ecosystem and we need to approach as the inhabit of animals to conserve Gotjawal. This study was conducted in Hangyeong-myeon Cheongsu-ri located in the western part of Jeju Island belonging to Hangyeong Andeok Gotjawal Zone and Jocheon-eup Seonheul-ri located in the eastern part of Jeju Island belonging to Jocheon Hamdeok Gotjawal Zone. Survey on advent of the birds was done twice a month from February 2013 to December 2014. A total of 66 species and 4,140 individuals in two Gotjawals were observed during the survey period. In Seonheul Gotjawal area, 53 species and 1,907 individuals were observed while it was 49 species and 2,233 individuals in Cheongsu Gotjawal area. The number of species between two Gotjawal areas was not significantly different, but the number of individuals between two Gotjawal areas was significantly different. Thirty-six species were found in both Gotjawal areas as common species and the index of similarity was 0.7. A total of 23 species were classified as the residents, 15 species as the winter visitors, 16 species as the passage migrants, 11 species as the summer visitors, and 2 species as the vagrant. Twelve species as legally protected birds including the natural monument and the endangered species were found and 8 species were found in Seonheul Gotjawal area while it was 10 species in Cheongsu Gotjawal area. The species that directly using a wetland or food resources related to water were 12 in the Seonheul and 6 species were observed in the Cheongsu Gotjawal area, but there is no significant difference between two Gotjawal areas. However, the number of individuals in Seonheul Gotjawal area was significantly higher than in that of in Cheongsu Gotjawal area. We need to research the wetlands and micro climatic condition existing in Gotjawal forests to find the cause of difference of two areas and this difference must be considered as an important indicator for the protection of Gotjawal forests.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.35-42
• /
• 1970

Five samples of Korean native Maeju(fermented soy-bean mash) loaves which were collected each from Kyunggi, Chungchung, Kangwon, Cholla and Kyungsang-Do were examined for their fermenting microorganisms. The results of taxonomic and ecological studies of fermentation microorganisms in these Maeju loaves were as the fellows. (1) The fungus flora grew only is the outer layer of Maeju loaves. Miscellaneous molds, 3 species of Mucor, 2 species of Pericallium., one species each of Scopulariopsis and Aspergillus, were isolated. None of them seemed exclusively predominant to be able to designate as the ecologically significant. (2) The bacterial flora which consisted of two species, Bacillus subtilis and Bacillus pumilus were distributed uniformly in th a entire Maeju loaves. The inner parts of Maeju loaves were especially inhabited solely by these bacterial flora. Probably the Korean native Maeju fermentation could be characterized by these bacterial flora. A Staphylococcus species was also isolated probably as a casual contaminant. (3) The yeasts, Rhodotorula flava and Torulopsis dattila, were isolated from Maeju loaves though their ecological significance was not clear. (4) The ecological aspects of fermentation microbes in the outer and inner parts of Maeju loaves were apparently different, consequently different fermentation processes might have occurred in these two parts and it brought quite different final outlooks in the final matured Maeju loaves. The outer part, rather rigid and dry, retained the light brown color of boiled soy-bean; whereas the inner part, soft and sticky, showed dark brown color indicating severe chemical changes. (5) The aflatoxin producing mold, Aspergillus oryzae was isolated from one sample among 5 of Maeju loaves. In addition to the low probability of isolability from Maeju loaves samples, since this mold grew only in the outer layer of Maeju loaves with such a low population density, about $10^4/g$, perhaps the aflatoxin problem in Korean native soysauce may not be critical.