• Journal of radiological science and technology
• /
• v.15 no.2
• /
• pp.31-36
• /
• 1992

Grids can improve the diagnostic quality of chest radiography by trapping the greater part of scattered radiation thus providing more detailed. chest radiographic images. It is most effective mathod of reduce the scatter ratio but must increase the expour factor. The benefit of use of grid is improve the contrast and the loss is increase of patient dose. In chest radiography especially hard quality high voltage radiography it will have to be considered to select the optimum grid with view point of benefit and loss. In this experiment, author got some result of characteristics about 4 different grids with film method. 1. There was no difference the scatter ratio in case of no grid and the scatter ratio was about 60%. 2. 16 : 1 grid was excellent of scatter reduction factor in high voltage chest radiography, next was 10 : 1, CROSS, MICRO FINE grid have low scatter reduction rate compare to 16:1, 10:1 grid. 3. The bucky factor of CROSS grid in accordance of kVp was find out the highest in 4 grids, on the contraly 10 : 1 grid was profitable to the exposure does. 4. With careful consideration in the point of scatter reducion rate and bucky factor, author suggest the 10 : 1 linear grid on the use of chest radiography in $80{\sim}120\;kVp$, 16 : 1 grid in $120{\sim}140\;kVp$.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1373-1378
• /
• 2007

Metal forming ins the process changing shapes and mechanical properties of the workpiece without initial material reduction through plastic deformation. Above all, because of hot working carried out above recrystallization temperature can be generated large deformation with one blow, it can produce with forging complicated parts or heat resisting super alloy such as Inconel 718 has the worst forgeability. In this paper, we established optimal variation of hot heading precess of the Inconel 718 used in heat resisting component and evaluated mechanical properties hot worked produce. Die material is SKD61 and initial temperature is $300^{\circ}C$. Initial billet temperature and punch velocity changed, relatively. Friction coefficient is 0.3 as lubricated condition of hot working. CAE is carried out suing DEFORM software before making the tryout part, and it is manufactured 150 ton screw press with optimal condition. It is known that forming load was decreased according to decreasing punch velocity.

• Natural Product Sciences
• /
• v.8 no.3
• /
• pp.83-89
• /
• 2002

Butea monosperma Kuntze, commonly known as 'Palash', is employed in various indigenous systems of medicine against several diseases and almost every part of the plant has diversified medicinal properties. The seeds are used as anthelmintic, aperient, digesti and to treat piles, skin diseases and abdominal troubles. They also have the property of reducing 'Kapha' and 'Vata' (in Ayurveda). In the present paper a detailed pharmacognostical evaluation of seeds has been undertaken. The study includes macro- and micro-scopical details, fluorescence powder study and HPTLC fingerprinting. The seed is characterized by finely ridged seed coat and palisade-like malpighian cells, discontinuous transparent linea lucida in upper half of malpighian layer and simple & oblong hilum. The study also concludes that the seed samples procured from different places have similar morphological and physico-chemical characteristics. These observations are also supported by similar TLC profiles. The estimation of heavy metals (to detect permissible toxic limits), and fatty acid composition have been carried out. An attempt has also been made to see the ecological and edaphic variations, if any.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.196-203
• /
• 2008

The densification behavior of Al-20Si-5.5Fe-1.2Mg-0.5Mn powders was investigated through micro-structure analysis of sintered specimens. The specimens sintered in vacuum or in high purity (99.999%) nitrogen showed porous near-surface microstructures. The densification of near-surface part was enhanced by means of ultra-high purity (99.9999%) nitrogen atmosphere. The relationship between slow densification and oxide surfaces of Al alloy powders was discussed. And the effects of Mg addition, nitrogen gas, and humidity on densification were discussed. In addition, the rapid growth of primary Si crystals above the critical temperature was reported.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.15-18
• /
• 2011

Up to now the incomplete texture have been manufactured through the 2D surface treatment like simple painting process or printing process. But in order to obtain 3D texture like natural object, micro scales' 3D surface structure on the surface of plastic part must be formed. In this study plastic smart phone case with 3D texture was produced by developing the surface duplication technology of natural object used electro-forming technology, by developing the press forming technology converted plane stamper to curved surface stamper and by developing the injection mold and molding technology which have been installed the curved surface stamper.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.263-280
• /
• 2015

Microwave remote sensing is probably the most recent experimental technique suitable to the non-contact measurement of deflections on large structures, in static or dynamic conditions. In the first part of the paper, the main techniques adopted in microwave remote sensing are described, so that advantages and potential issues of these techniques are presented and discussed. Subsequently, the paper addresses the application of the radar technology to the measurement of the vibration response on the stay cables of two cable-stayed bridges. The dynamic tests were performed in operational conditions (i.e. with the excitation being mainly provided by micro-tremors, wind and traffic) and the maximum deflections of the cables were generally lower than 5.0 mm. The investigation clearly highlights: (a) the safe and simple use of the radar on site and its effectiveness to simultaneously measure the dynamic response of all the stay cables of an array; (b) the negligible effects of the typical issues and uncertainties that might affect the radar measurements; (c) the accuracy of the results provided by the microwave remote sensing in terms of natural frequencies and tension forces of the stay cables; (d) the suitability of microwave interferometry to the repeated application within Structural Health Monitoring programmes.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.2
• /
• pp.111-115
• /
• 2009

The pharmacokinetics of cyclosporin A (CsA) after single and multiple oral dosing of new CsA self-micro-emulsifying drug delivery system (SMEDDS) in dogs were estimated. A single dose study was performed following a two-way crossover design against six dogs with reference SMEDDS. For a multiple dose study, three dogs were allocated for each drug, and 100 mg of drug was administered daily for 6 days. Whole blood concentration of CsA was analyzed by radio-immunoassay. Both drug showed identical blood concentration profiles in both studies, and no statistical difference was detected in pharmacokinetic parameters. The relative bioavailabilities of test SMEDDS were 91.4% and 89.1%, respectively, in the single dose study and the last day of multiple dose study. Especially, multiple dose study proved the good relationship between C-0/C-2 and AUC for reference SMEDDS, which is an indispensable part of therapeutic drug monitoring. These results suggest newly formulated CsA SMEDDS possibly shows identical pharmacokinetics and pharmacodynamic behaviors in clinical trials.

• YAKHAK HOEJI
• /
• v.50 no.2
• /
• pp.111-117
• /
• 2006

Cardiac chambers serve as mechanosensory systems during the haemodynamic or mechanical disturbances. To examine a possible role of fluid pressure (FP) in the regulatien of atrial $Ca^{2+}$ signaling we investigated the effect of FP on L-type $Ca^{2+}$ current $(I_{Ca})$ in rat ventricular myocytes using whole-cell patch-clamp technique. FP $(\sim40cm\;H_2O)$ was applied to whole area of single myocytes with electronically controlled micro-jet system. FP suppressed the magnitude of peak $I_{Ca}$ by $\cong25\%$ at 0 mV without changing voltage dependence of the current-voltage relationship. FP significantly accelerated slow component in inactivation of $I_{Ca}$, but not its fast component. Analysis of steady-state inactivation curve revealed a reduction of the number of $Ca^{2+}$ channels available for activity in the presence of FP. Dialysis of myocytes with high concentration of immobile $Ca^{2+}$ buffer partially attenuated the FP-induced suppression of $I_{Ca}$. In addition, the intracellular $Ca^{2+}$ buttering abolished the FP-induced acceleration of slow component in $I_{Ca}$ inactivation. These results indicate that FP sup-presses $Ca^{2+}$ currents, in part, by increasing cytosolic $Ca^{2+}$ concentration.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.3
• /
• pp.368-375
• /
• 2020

This study presents a survey of the bryophytes of evergreen broad-leaved forest near Baekyaki Oreum in Gujwa-Seongsan Gotjawal in the eastern part of Jejudo Island, Korea. A total of 53 taxa belonging to Bryophyta (11 families 26 genera 39 species) and Marchantiophyta (9 families, 9 genera 14 species) were determined, and the liverwort index was found to be 26.4%. The predominant life-form was the mat type. The rates of bryophytes dominating at mesic to hygric sites were higher than those of bryophytes, which were mainly observed in xeric habitats. These values indicate that the forest areas in this study area have a high density level. Upon an investigation of the substrates, bryophytes on rocks were most diverse. It was also found that volcanic rock masses of various sizes lay scattered over the study area and offer numerous micro-habitats for bryophytes. This is related to the characteristics of Gotjawal. We consider that more detailed studies should be conducted on regional scales to establish the bryophyte flora of Gotjawal and the evergreen broad-leaved forests of Jejudo Island.

• Journal of the Korean Geophysical Society
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2004

Gravity, magnetic and high-resolution seismic surveys were carried out in the Powell Basin to examine tectonic structure and recent sedimentation on Dec. 2002. The trend of negative gravity anomalies along the spreading axis of the Powell Basin changes from northwest to east-west toward south. Both boundaries of the basin with the Antarctic Peninsula and the South Orkey micro-continent show negative magnetic anomalies, which indicates that the boundaries were continental rift areas in the initial stage of spreading. Magnitude of the magnetic anomalies corresponding to the axis of the basin is rather small compared to those of normal spreading axises in other regions. Such small anomalies would be caused by reduction of magnetic strength of oceanic crust below thick sediments due to thermal alternation. High-resolution (3.5 kHz) seismic profiles reveal that top of the South Scotia Ridge is a flat terrain coverd with thin coarse sediments by glacial erosion. Thick oceanic sediments are deposited in the central part of the basin. Little deformation in the oceanic sediments indicates that the Powell Basin has been in stable tectonic environment after spreading of the basin stopped.