• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.10
• /
• pp.776-783
• /
• 2008

The object of this paper is to study on the thermal performance of a micro channel water block for computer CPU cooling. The effects of liquid flow rate, micro channel width and height on the thermal performances of water block are investigated experimentally. The water block was fabricated Al and machined with a micro milling. The water block consisted of rectangular micro channels 0.5 to 0.9 mm width and 1.5 to 4.5 mm height. The experiments were conducted using deionized water, over a liquid flow rate ranging from 0.2 to 2.0 kg/min. The base temperature and thermal resistance decrease with increasing of liquid flow rate. The increase of a channel height is more effective on the thermal resistance than the decrease of a channel width. At the flow rate of 0.7 kg/min, input power of 100 W, the base temperature and thermal resistance of sample 6 is $33^{\circ}C$ and $0.13\;^{\circ}C/W$ respectively.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.197-202
• /
• 2005

Current Optical Disk drive is dominating high share gradually in information storage device market through development of great skill. These technologies can achieve not only improvement of transmission speed but also elevation of recording/reproduction technology. However, these present state cause not only the increase of vibration in structural viewpoint but also problem of serious noise while the ODD becomes high speed/high performance. Specially, air-born noise is being bigger than structural-born noise as disk rotation speed increases gradually. The object of this research is that reduce the air-born noise in optical disk drive by reducing a quantity of flow by using a miniaturized muffler. The micro muffler is a miniaturized muffler. The muffler is used widely by solution to reduce air-born noise which is generated by flow. According to frequency band of the noise source, it can be applied by muffler of various forms. In this research, we examined the noise characteristics of the micro muffler and applied it by noise reduction solution of the ODD. It could get an excellent noise reduction in high frequency band by using the micro muffler than the opened case through the decrease of an inner flow. But it could not get a noise reduction in low frequency band through the decrease of an inner flow.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.10
• /
• pp.993-998
• /
• 2007

To verify the 2D or 3D positioning accuracy of a multi-axes stage is not easy, particularly, in the case the moving path of the stage is not linear. This paper is a study on a measuring method for the curved path accurately. A machine vision technique is used to trace the moving path of two-axes stage. To improve the accuracy of machine vision, a zoom lens is used for the 2D micro moving path. The accuracy of this method depends of the CCD resolution and array align accuracy with the zoom lens system. Also, a further study for software algorithm is required to increase the tracing speed. This technique will be useful to trace a small object in the 2D micro path in real-time accurately.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.881-886
• /
• 2009

This paper presents a manipulation system consisting of a coarse/fine XY positioning system and an out-of-plane manipulator. The object of the system is to conduct tine positioning and manipulation of micro parts. The fine stage and the out-of-plane manipulator have compliant mechanisms with flexure hinges, which are driven by stack-type piezoelectric elements. In the fine stage, the compliant mechanism plays the roles of motion guide and displacement amplification. The out-of-plane manipulator contains three piezo-driven compliant mechanisms for large working range and fine resolution. For large displacement, the compliant mechanism is implemented by a two-step displacement amplification mechanism. The compliant mechanisms are manufactured by wire electro-discharge machining for flexure hinges. Experiments demonstrate that the developed system is applicable to a fine positioning and fine manipulation of micro parts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.571-572
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.73-74
• /
• 2010

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.111-118
• /
• 2006

This paper presents design and development of a simulator evaluates the performance of a hierarchical cellular system. The proposed hierarchical cellular simulator, consisting of macro, micro, and pico cells, applies the wrap-around technique to reduce simulation time. The simulator is implemented as object oriented class models by using the C++ language in a PC environment. The resulting application can evaluate the interference, SIR(Signal to Interference Ratio), and capacity of a hierarchical cellular system in various configurations. Moreover, it can be used in other applications such as power control, call admission control, hand over scheme.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.568-576
• /
• 1998

In this thesis discuss with a flexible robotic finger design and controller which is used for the micro flexible robotic finger. So, miniaturization, precision, controller for the control of grasping force and actuator were needed. And, even if we develop a new actuator and controller, in order to use on real system, we must considerate of a many side problem. In a force control of micro flexible finger for grasping an object, the fingertip's vibration was more important task of accuracy control. And, controller were adopt the PD/PI mixed type fuzzy controller. The controller were consist of two part, one is a PD type fuzzy controller for increase the rising time response, the other is a PI type fuzzy controller for decrease of steady-state error. Especially, in a PD type fuzzy controller, we used only seven rules. And, for a PI controller, we adopt a reset factor for the control of input values. so, we have overcome the exceed of controller's input range. For the estimate of ontroller's utility and usefulness, we have experiment and computer simulation of three cases. First, we consider of unit force grasping control for a task object, which is 0.03N. Second, bounding grasping force control which is add to a sinusoidal force on the unit force. At this cases the task force is (0.03+0.01 sin wt N). And consider of following of rectangular forces.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.2
• /
• pp.65-80
• /
• 2011

This is to find out geomorphological environment of optimum location for the object of dwelling site of Bronze Age (hereinafter called dwelling site) of total 177 unit confirmed in Yongducheon basin and Onyangcheon basin (hereinafter called investigation-object basin) in Asan-si Chungnam. To do this, hill of investigation-object basin where dwelling sites were confirmed was divided into 11 units of hillslope geomorphological and this was combined with the grade of 5 units of gradient and again subdivided into total 55 units of micro-landforms of Hillslope. Based on this, in the viewpoint of 'gradient of each of micro-landforms' analyzed 'number of dwelling sites' and 'dwelling site distribution density (unit: number of dwelling sites/1000m2)'. As the result, the optimum geomorphological environment where dwelling sites were located was largely confirmed be 5 units(① semi-gentle slope land of crest slope ②gentle slope land of crest slope ③ slope of upper sideslope ④ flat land of crest slope ⑤ flat land of crest flat). It is thought that this analysis data will be used in the future as basic data for the study of predicting distribution of dwelling sites in Bronze Age which might have been buried in the investigation-object basin.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.85-100
• /
• 2011

We were to investigate the geomorphological environment of optimum location in the object of Bronze Age's dwelling site (hereinafter called dwelling site) of total of 205 units confirmed in the 'Cheonan Baekseokdong Relic Group' distributed in hill of the uppermost stream part in the watershed of Jangjae stream in Cheonan, Chungnam Province. To do this, we classified the hill of the object of investigation where dwelling sites were distributed as 8 units of slope micro-landforms and again by combining them with the grade of gradient of 5 units subdivided them into ultra-micro-landforms of total 40 units. On the foundation of this, in the viewpoints of 'gradients of each of micro-landforms' analyzed the 'number of dwelling sites' and 'dwelling site distribution density (measure: number of dwelling sites/1000m²) of 'Cheonan Baekseokdong Relic Group'. As the result, the optimum landform environment where the dwelling sites were located were found to be largely 5 units of ultra-micro-landforms - ① flat land of crest flat, ② gentle slope land of crest flat, ③ flat land of crest slope, ④ gentle slope land of crest slope and ⑤ semi-gentle slope land of crest slope. This analyzed material will be used from now on as basic material which can predict the distribution of dwelling sites of Bronze Age men who dwelled in the watershed of Jangjae stream.