• 한국유기농업학회지
• /
• 제25권2호
• /
• pp.461-473
• /
• 2017

Total mixed ration (TMR) including concentrate diet and roughage together have been used for the ruminant animal. Relatively high concentrations of moisture and water soluble carbohydrate are representative feature of TMR. Those moisture and water can also provide a niche for bacterial growth. Therefore, a possible fermentation of TMR induced by micro-organism is generally accepted. The present study hypothesized that different lactic acid bacteria could alter fermentation of TMR and subsequently rumen fermentation. Three lactic acid bacteria, Lactobacillus paracasei (A), L. plantarum (B) and L. parabuchneri (C), were employed and 7 treatments under full factorial design were compared with control without inoculation. TMR for dairy cow was used. Significant alterations by treatments were detected at lactic acid and butyric acid contents in TMR (p<0.05). Treatment AC (mixture of A and C) and BC (mixture of B and C) showed great lactate production. Great butyrate production was found at treatment C. At in vitro rumen fermentation, treatments B, C and AB (mixture of A and B) showed significantly great total gas production (p<0.05). All treatments except treatments B and AB, showed less dry matter digestibility, significantly (p<0.05). Total volatile fatty acid production at treatment AC was significantly greater than others (p<0.05). In individual volatile fatty acid production, treatment AB and AC showed great acetate and propionate productions, significantly (p<0.05). This study investigated correlation between organic acid production in TMR and rumen volatile fatty acid production. And it was found that butyric acid in TMR had significant negative correlation with acetate, propionate, total volatile fatty acid, AP ratio and dry matter digestibility.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.68-68
• /
• 2011

As feature size is smaller, new technology are needed in semiconductor factory such as gap-fill technology for sub 100nm, development of ALD equipment for Cu barrier/seed, oxide trench etcher technology for 25 nm and beyond, development of high throughput Cu CMP equipment for 30nm and development of poly etcher for 25 nm and so on. We are focus on gap-fill technology for sub-30nm. There are many problems, which are leaning, over-hang, void, micro-pore, delaminate, thickness limitation, squeeze-in, squeeze-out and thinning phenomenon in sub-30 nm gap fill. New gap-fill processes, which are viscous oxide-SOD (spin on dielectric), O3-TEOS, NF3 Based HDP and Flowable oxide have been attempting to overcome these problems. Some groups investigated SOD process. Because gap-fill performance of SOD is best and process parameter is simple. Nevertheless these advantages, SOD processes have some problems. First, material cost is high. Second, density of SOD is too low. Therefore annealing and curing process certainly necessary to get hard density film. On the other hand, film density by Flowable oxide process is higher than film density by SOD process. Therefore, we are focus on Flowable oxide. In this work, dielectric film were deposited by PECVD with TSA(Trisilylamine - N(SiH3)3) and NH3. To get flow-ability, the effect of plasma treatment was investigated as function of O2 plasma power. QMS (quadruple mass spectrometry) and FTIR was used to analysis mechanism. Gap-filling performance and flow ability was confirmed by various patterns.

• 대기
• /
• 제18권2호
• /
• pp.97-109
• /
• 2008

The aerosol characteristics in terms of 4 different cases (Asian dust, fog, clear sky and cloud) which had happened at Anmyeon Island in April 2006 were studied using various measurements such as the Micro Pulse Lidar (MPL), sunphotometer, $\beta$-ray $PM_{10}$ Analyzer, anemoscope and anemometer. In addition, synoptic charts, back trajectory analyses and satellite images were also used to help characterize the aerosol events. The aerosol optical properties were featured by the Aerosol Optical Depth (AOD) and ${\AA}ngstr\ddot{o}m$ exponent which were estimated by the sunphotometer. When Anmyeon Island was dominated by the Asian dust, the AOD was sharply increased as seven times as a yearly average of it (0.35). As compared with a yearly average of the ${\AA}ngstr\ddot{o}m$ exponent of 0.97, the ${\AA}ngstr\ddot{o}m$ exponent of a dust day was significantly low (0.099). In addition, $PM_{10}$ mass concentration showed an extremely high record. The maximum concentration reached $1790.5{\mu}gm^{-3}$ on 8 April 2006. The maximum mass concentration was shown with delay when the wind speed of $0ms^{-1}$ was observed. It was also found that a satellite image of the MODIS-RGB had a good agreement with the results of those measurements. It was shown that the MPL was able to describe effectively the vertical distribution of aerosol for all the cases. In particular, the MPL evidently captured the aerosol layer before the cloud observation. The aerosol layer was similarly described by the AOD. On a clear sky day, the AOD had not only a very low value (0.054) but also a feature of homogeneity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1225-1234
• /
• 2009

As the Wenchuan Earthquake was of high magnitude and shallow seismic focus, it caused great damage and serious geo-hazards. By the field investigation and remote-sensing interpretation after the earthquake and by using means of GIS, the distribution of geo-hazards triggered by the earthquake was analyzed and the conclusions are as follows: (1) the earthquake geo-hazards showed the feature of zonal distribution along the earthquake fault zone and linear distribution along the rivers; (2) the distribution of earthquake geo-hazards had a marked hanging wall effect, for the development density of geo-hazards in the hanging wall of earthquake fault was obviously higher than that in the foot wall and the width of strong development zone in the hanging wall was about 10 km; (3) the topographical slope was a main factor which controlled the development of earthquake geo-hazards and a vast majority of geo-hazards were distributed on the slopes of 20 to 50 degrees; (4) the earthquake geo-hazards had a corresponding relationship with the elevation and micro-landform, for most hazards happened in the river valleys and canyon sections below the elevation of 1500 to 2000 m, particularly in the upper segment of canyon sections (namely, the turning point from the dale to the canyon). Thin ridge, isolated or full-face space mountains were most sensitive to the seismic wave, and had a striking amplifying effect. In these areas, collapses and landslides were most likely to develop; (5) the study also showed that different lithologies determined the types of geo-hazards, and usually, landslides occurred in soft rocks, while collapses occurred in hard rocks.

• KIEAE Journal
• /
• 제14권3호
• /
• pp.105-109
• /
• 2014

The recent rising living standards, environment-friendly, well-being and health aspects of life in the basic gratification, as well as the desire for a pleasant environment emotionally environmentally friendly way of external space or industrial interest in the indoor environment, the manifestation. In particular, the biggest problem of the indoor environment has been emerged as a Sick House Syndrome indoor space that is provided to the building materials, and the impact on the domestic and the indoor environment, and clean the house in a health standards are specified as laws. The performance rating and the various materials to create environmentally-friendly standards for building materials. The more detail, Porous clay material, toxic substances released by applying the high humidity and the water itself, and to absorb the moisture, if the emissions, without a separate device, to maintain a comfortable indoor environment and at the same time, one of the causes of Sick House Syndrome breaking down harmful substances to absorb a comfortable indoor environment to maintain an environmentally-friendly building interior material studies. It is aimed at the development to multi-functional high performance eco-friendly construction materials, rather than through one feature performance, identify key features for national and international eco-friendly building materials can exert Water Vapour Adsorption raw, decomposed materials for the application and selection.

• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.302-307
• /
• 2007

본 연구에서는 이온성 폴리머-금속 복합재료 (IPMC) 작동기를 사용한 플랩 밸브 마이크로 펌프의 설계, 제작 및 실험적 특성 규명을 수행하였다. 나피온/실리케이트 층과 나피온/실리카 나노복합재료를 기반으로 한 다층형 IPMC를 마이크로 펌프의 작동층으로 사용하였다. 마이크로 펌프의 핵심 요소인 IPMC 다이아프램의 주위를 유연한 폴리디메틸실옥산(PDMS)을 사용하여 지지하도록 함으로써 상당히 큰 작동 변위를 내도록 설계하였다. 이렇게 개발된 마이크로 펌프의 크기는 $20{\times}20{\times}5$ ${mm}^3$ 이고, 최대 유량은 760 l/min, 최대 배압은 1.5 kPa이었다. 본 연구에서 개발한 마이크로 펌프는 간단하고 효율적인 설계를 수행하여 제작이 용이할 뿐 아니라, 동작 전압이 1-3V라는 장점이 있다.

• 정보처리학회논문지C
• /
• 제9C권5호
• /
• pp.733-742
• /
• 2002

이동 컴퓨팅 환경에서 사용자의 이동 특성은 실시간 멀티미디어 서비스를 제공하기 위해서 요구되는 QoS에 심각한 영향을 미친다. 기존의 유선환경에서 실시간 서비스를 제공하기 위해서 제안된 RSVP 프로토콜을 이동 사용자의 네트워크 접속점이 수시로 변화하는 이동 컴퓨팅 환경에 적용하기에는 부적합하다. 사용자의 이동이 QoS에 미치는 영향을 최소화하기 위해서 사용자가 이동할 것으로 예상되는 영역에 대한 자원을 미리 예약하는 프로토콜이 MRSVP(Mobile RSVP)이다. 본 논문은 기존의 MRSVP를 확장하여 RSVP Tunnel 및 Mobile IP의 지역 등록(Regional Registration) 프로토콜이 결합된 동적 이중 앵커노드(DDAN : Dynamic Dual Anchor Node) 구조를 제안한다. 이는 기존의 MRSVP 프로토콜에서 미리 예약되는 자원을 지역적으로 제한함으로써 자원예약을 최소화시키는 반면에, 기존의 MRSVP와 유사한 수준의 QoS 보장을 목적으로 한다.

• 자원리싸이클링
• /
• 제22권3호
• /
• pp.36-42
• /
• 2013

최근 사회기반 구조물이 대형화, 특수화, 다양화 되어감에 따라 강도적인 측면과 환경적인 측면에 부합하는 건설재료를 필요로 하고 있다. 따라서, 시멘트 제조시 주원료인 석회석 미분말을 사용하여 에너지 감축과 $CO_2$발생을 절감하고자 하였으며, 환경부하 저감형 건설재료로 부각되고 있는 고로슬래그, 플라이애쉬를 사용하고자 하였다. 본 연구에서는 수화생성물의 결합력에 따른 화학적 특성을 고려해 내구성 측면을 파악하고자 한다. 그 결과 3일 압축강도가 30 Mpa 이상 측정되었다. 또한 석회석 미분말의 사용량이 증가함에 따라 응결시간이 빨라지고, 길이변화에서 팽창되는 특징을 가지고 있다. 그리고 보통 포틀랜드 시멘트를 사용하였을 때와 비교하여 재령 7일 이전에는 휨강도가 높은 것으로 측정되는 등 기존 건설용 재료를 대체할 가능성이 충분하다고 판단되어진다.

• 한국자기학회지
• /
• 제21권5호
• /
• pp.185-192
• /
• 2011

박막제조 기술은 과학 기술의 기초가 되는 분야로 양질의 박막을 제조하기 위한 다양한 노력이 경주되고 있다. 박막제조는 표면개질과 함께 표면처리 기술의 한 분야이며 이중 진공증착으로 알려진 물리증착법과 화학증착법은 현대의 과학기술 연구는 물론 산업적으로 폭넓게 이용되는 박막제조 기술 중의 하나이다. 진공증착을 이용한 박막제조 기술은 나노 기술의 등장과 함께 비약적인 발전을 이루었으며 자연모사와 완전화 박막의 제조, 융복합 공정을 이용한 기능성 코팅과 Engineered Structure 구현 그리고 초고속 증착과 원가 저감 기술의 실현이 주요 이슈로 등장하고 있다. 본 논문에서는 물리증착법과 화학증착법을 중심으로 박막제조 기술의 종류와 원리를 설명하고 박막제조 기술의 최신 동향과 기술적 이슈 및 향후 전망에 대해 기술한다.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.44.1-44.9
• /
• 2020

Objectives: Phytic acid (IP6), a naturally occurring agent, has been previously reported as a potential alternative to ethylenediaminetetraacetic acid (EDTA). However, its effect on adhesion to sodium hypochlorite (NaOCl)-treated dentin and its interactions with NaOCl have not been previously reported. Thus, in this study, the effects of IP6 on resin adhesion to NaOCl-treated dentin and the failure mode were investigated and the interactions between the used agents were analyzed. Materials and Methods: Micro-tensile bond strength (µTBS) testing was performed until failure on dentin treated with either distilled water (control), 5% NaOCl, or 5% NaOCl followed with chelators: 17% EDTA for 1 minute or 1% IP6 for 30 seconds or 1 minute. The failed specimens were assessed under a scanning electron microscope. The reaction of NaOCl with EDTA or IP6 was analyzed in terms of temperature, pH, effervescence, and chlorine odor, and the effects of the resulting mixtures on the color of a stained paper were recorded. Results: The µTBS values of the control and NaOCl with chelator groups were not significantly different, but were all significantly higher than that of the group treated with NaOCl only. In the failure analysis, a distinctive feature was the presence of resin tags in samples conditioned with IP6 after treatment with NaOCl. The reaction of 1% IP6 with 5% NaOCl was less aggressive than the reaction of the latter with 17% EDTA. Conclusions: IP6 reversed the adverse effects of NaOCl on resin-dentin adhesion without the chlorine-depleting effect of EDTA.