• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1179-1182
• /
• 2005

To facilitate the cell based robot research, we presented a micro-mechanical force measurement system for the biological muscle actuators, which utilize glucose as a power source for potential application in a human body or blood vessels. The system is composed of a micro-manipulator, a force transducer with a glass probe, a signal processor, an inverted microscope and video recoding system. Using this measurement system, the contractile force and frequency of the cardiac myocytes were measured in real time and the magnitude of the contractile force of each cardiac myocyte on a different condition was compared. From the quantitative experimental results, we estimated that the force of cardiac myocytes is about $20{\sim}40\;{\mu}$N, and showed that there is difference between the control cells and the micro-patterned cells.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.94-99
• /
• 2000

In this study applied the general controller into th 16bit ordinary controller and recommand the simulator features the real system's propeties without DSP(Digital Signal Processing)-card. This simulator is designed to be synchronized in real time using A/D(Analog-Digital) convert and D/A(Digital-Analong) convert. In this study DSP card which is usually used for complex calculation is replaced with personal computer and designed to control, control-force using with the 16-bit micro processor.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.757-766
• /
• 1985

Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.828-831
• /
• 1997

One of the most important design factor for the image tracker is the speed of the data processing which allows real-time operation of the system and provides reasonably accurate performance at the same time. Use of powerful DSP alone does not guarantee to meet such requirement. In this paper, a simple efficient algorithm for real-time multi-target image tracking is suggested. The suggested method is based on a recursive centroiding technique and color table look-up. This method has been successfully implemented in a image processing system for Micro-Robot Soccer Tournament(MIROSOT). This tracker can track positions of a ball, 3 enemies, and 3 agents at the same time. The experimental results show that the processing time for each frame of image is less than 7ms, which is well within the 60Hz sampling interval for real-time operation.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.668-674
• /
• 2006

In order to develop a cell based robot, we present a micro-mechanical force measurement system for the biological muscle actuators, which utilize glucose as a power source. The proposed measurement system is composed of a micro-manipulator, a force transducer with a glass probe, a signal processor, an inverted microscope and video recording system. Using this measurement system, the contractile force and frequency of the cardiac myocytes were measured in real time and the magnitudes of the contractile force of each cardiac myocyte under different conditions were compared. From the quantitative experimental results, we could estimate that the force of cardiac myocytes is about $20\sim40{\mu}N$, and show that there are differences between the control cells and the micro-patterned cells.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.461-468
• /
• 2005

This paper proposes a wheel-assembly automation system, which assembles a wheel into a hub of a vehicle hung to a moving hanger in a car manufacturing line. A macro-micro manipulator control strategy is introduced to increase the system bandwidth and tracking accuracy to ensure insertion tolerance. A camera is equipped at the newly designed wheel gripper, which is attached at the center of the end-effector of the macro-micro manipulator and is used to measure position error of the hub of the vehicle in real time. The redundancy problem in the macro-micro manipulator is solved without complicated calculation by assigning proper functions to each part so that the macro part tracks the velocity error while the micro part regulates the fine position error. Experimental results indicate that tracking error satisfies the insertion tolerance of assembly $({\pm}1mm)$, and thus it is verified that the proposed system can be applied to the wheel assembly task on a moving hanger in the manufacturing line.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1394-1397
• /
• 1993

A Fuzzy Microprocessor(FMP) is presented, which is suitable for real-time control applications. The features include high speed inference of maximum 114K FLIPS at 20MHz system clocks, capability of up to 128-rule construction, and handing of 8 input variables with 8-bit resolution. In order to realize these features, the fuzzifier circuit and the processing element(PE) are well optimized for LSI implementation. The chip fabricated in 1.2$\mu\textrm{m}$ CMOS technology contains 71K transistors in 82.8 $\textrm{mm}^2$ die size and is packaged in 100-pin plastic QFP.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.288-290
• /
• 2006

This paper presents the real-time water tank wireless control in a ship using duplex RF modules and PLC(Programmable logic Controller). The purpose of this paper is developing HMI(Human Machine Interface) for automation equipments. The system can low a cost because long wires are no more used. Analog signals of the water gauge and flow meter are changed to discrete signals by the micro-processor. The PLC checks the volume of water and runs On or Off of the valve and pump. Duplex RF modules send and receive data between the water tank and control room. Everywhere the Internet is used, operators are able to check the status of the system by the web-server.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.4
• /
• pp.13-18
• /
• 2003

This paper presents the in-process compensation to control cutter ronout and to improve the machined surface quality. Cutter ronout compensation system consists of the micro-positioning servo system with piezoelectric actuator which is embeded in the sliding table to manipulate radial depth of cut in real-time. Cutting force feedback control was proposed in the angle domain based upon repetitive learning control strategy to eliminate chip load variation in end milling process. Micro-positioning control due to adaptive actuation force response improves the machined surface quality by cutter ronout compensation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.828-834
• /
• 1989

On-Line optimization of process units has heretofore been restricted to the individual equipment level using linear approximate models. The advent of the low cost, high speed micro-computer coupled with the speed and robustness of an equation based exact simulator is making real-time optimization of entire process units a reality. The resultant implications for a decision system applied to day-to-day operations, point to a significant change in the way process plants will be managed in the future.