• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.737-742
• /
• 2013

The purpose of this study was to remove sediments obtained from breeding ground using supersonics and micro-air flotation method. Sediments from Tongyong breeding grounds showed no contaminations of heavy metals but had great amount of organics. Thus, efficient removal of sediments was required to preserve water quality near breeding ground. Supersonics treatment for sediments was determined to be essential because higher removal efficiency of sediments was obtained when supersonics treatment was used. In addition, application of coagulants increased removal efficiency because its usage increased particle size of sediments, which enabled easy trapping of sediments particle into micro-air bubbles. Removal efficiency of sediments slightly decreased from 95.8% (1 g/L) to 83.9% (8 g/L) at the tests for different amount of sediments, but most of tiny particles were removed from water where sand size particles were left in the bottom of reactors.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.41-47
• /
• 2012

The purpose of this study was to determine optimum condition for the cultivation of Chlorella sp. FC-21 using red light emitting diodes (LED). Specific growth rate and cell concentration were measured for the reactors at the illuminations of different light intensity of red LED. Under the illumination of red LED, specific growth rate increased as light intensity increased but cell concentrations decreased. To determine beneficial effect of aeration to cell cultivation, micro-air bubbles were aerated at 0.7 vvm in the reactor at the illumination of red LED. Two and ten times greater specific growth rate and cell concentration were obtained when aeration was applied. In case of blowing of carbon dioxide, pH of culture medium decreased below to pH 3, which resulted in decreases of cell concentration. From this study, we found that red LED with aeration were the most appropriate light source for the cultivation of Chlorella sp. FC-21.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1939-1944
• /
• 2020

Pool boiling heat transfer of a copper microporous coating was experimentally studied in borated water with a concentration of boric acid from 0.0 to 5.0 vol percent (vol%) to determine the effect of boric acid on boiling heat transfer in water. A high-temperature, thermally conductive microporous coating (HTCMC) was created by sintering copper powder with an average particle size of 67 ㎛ onto a 1 cm × 1 cm plain copper surface with a coating thickness of ~300 ㎛ within a furnace in a vacuum environment. The tests showed that the nucleate boiling heat transfer coefficient (NBHT) of HTCMC became slightly less enhanced as the concentration of boric acid increased but the NBHT coefficient values were still significantly higher than those of the plain surface. The critical heat flux (CHF) values from 0 to 1.0 vol% were maintained at ~2,000 kW/㎡, and then, they gradually decreased down to ~1,700 kW/㎡ as the concentration increased further to 5.0 vol%. It is believed that the micro-scale pores of the HTCMC were partially blocked by the high boric acid concentration during the nucleate boiling such that the small bubbles were not effectively created using the HTCMC reentrant cavities as the boric acid concentration increased.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.167-177
• /
• 2016

This work investigated the decomposition of aqueous anatoxin-a originated from cyanobacteria using an underwater dielectric barrier discharge plasma system based on a porous ceramic tube and an alternating current (AC) high voltage. Plasmatic gas generated inside the porous ceramic tube was uniformly dispersed in the form of numerous bubbles into the aqueous solution through the micro-pores of the ceramic tube, which allowed an effective contact between the plasmatic gas and the aqueous anatoxin-a solution. Effect of applied voltage, treatment time and the coexistence of nutrients such as $NO_3{^-}$, $H_2PO_4{^-}$ and glucose on the decomposition of anatoxin-a was examined. Chemical analyses of the plasma-treated anatoxin-a solution using liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC) were performed to elucidate the mineralization mechanisms. Increasing the voltage improved the anatoxin-a decomposition efficiency due to the increased discharge power, but the energy required to remove a given amount of anatoxin-a was similar, regardless of the voltage. At an applied voltage of 17.2 kV (oxygen flow rate: $1.0L\;min^{-1}$), anatoxin-a at an initial concentration of $1mg\;L^{-1}$ (volume: 0.5 L) was successfully treated within 3 min. The chemical analyses using LC-MS and IC suggested that the intermediates with molecular weights of 123~161 produced by the attack of plasma-induced reactive species on anatoxin-a molecule were further oxidized to stable compounds such as acetic acid, formic acid and oxalic acid.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.8
• /
• pp.591-597
• /
• 2011

The purpose of this study was to determine optimum conditions for the cultivation of Chlorella sp. FC-21 using light emitting diodes (LEDs). Specific growth rate and cell concentration were measured for the reactors at the illuminations of different wavelengths of LEDs. Among various types of LEDs, red LEDs were the most effective light source, and also greatest increases of specific growth rate and cell concentrations were obtained when light intensity of red LEDs increased. The specific growth rate decreased when initial cell concentration increased due to the shading effect of each cell in the reactor. To determine beneficial effect of aeration to cell cultivation, micro-air bubbles were aerated at 0.35 vvm in the reactor at the illumination of red LEDs. Two and ten times greater specific growth rate and cell concentration were obtained when aeration was applied. From this study, we found that red LEDs with aeration were the most appropriate light source for the cultivation of Chlorella sp. FC-21.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.363-368
• /
• 2010

In the solid rocket propellant combustion, the dynamic phase change from solid to liquid to vapor occurs across the melt layer. During the surface burning, liquid and gas phases are mixed in the intermediate zone between the propellant and the flame to form micro scale bubbles. The known thickness of the melt layer is approximately 1 micron at $10^5$ Pa. In this paper, we present a model of the melt layer structure and the dynamic motion of the melt front derived from the classical phase field theory. The model results show that the melt layer grows and propagates uniformly according to exp(-1/$T_s$) with $T_s$ being the propellant surface temperature.

• Journal of the Korean housing association
• /
• v.24 no.6
• /
• pp.41-49
• /
• 2013

This study finds out the aged consumers' needs on the developing elderly friendly and sensitive bathtub. This bathtub focuses on enhancement of multi-senses and enhancement of health, safety & convenience during bath. The enhancing multi-senses would have four functions; therapy with color and aroma, the massage with micro water bubbles, the visual and auditory with TV & cinema, and the auditory with music and radio. Also, enhancing others of bathtub would have seven functions; emergency bell, blood-pressure check system for health condition, water temperature indicator, keeping water warm, reading a book in that, and controlling of house entrance door and a getting the phone during bath. The aged consumers' needs find throughout a questionnaire survey, and 497 data was analyzed. The main results are as follow. They consider a full bath behavior as a healthcare. They have an intention to purchase or use the elderly and friendly bathtub, and they prefer using it in common facilities to using it at home. They highly need health related function of bathtub, which are massage (64.4%), blood-pressure check system (55.1%) and aroma therapy (45.7%). The emergency bell (67.0%), keeping water warm (62.2%), and water temperature indicator (49.7%), related to safety & information function of bathtub, are needed. Also, they think tolerance for error and low physical effort in bathtub design alternative, opening door and inside sitting support, to be important.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.767-774
• /
• 2005

The DOF (Dissolved Ozone Flotation) system was used to treat the effluent of the secondary wastewater treatment plant. The DOF system uses ozone instead of air, while DAF (Dissolved Air Flotation) uses air. Moreover, since the solubility of ozone is higher than air, the DOF system produces larger volume of micro-bubbles than the DAF system does. Thus, the DOF system performs better than the DAF system in floating ability. The DOF system could remove 70% of turbidity to an average of 0.59NTU in effluent from 2.31NTU in influent. The removal efficiency of absorbance measured with UV-254 in the effluent of the DOF system was 63%, while only 19% was removed by the DAF system. the DOF system removed 84% of the color from 25~26CU to 4CU, while DAF system removed 42% of the color to 15 CU. The CODMn removal efficiency of the DOF system was 34%, 6.8mg/l of effluent $COD_{Mn}$ concentratin, while it was 20%, 8.3mg/L of effluent $COD_{Mn}$ concentratin, to use the DAF system. Microbial bacteria such as coliform bacteria, and heterotrophic bacteria were removed over 99% by the DOF system, and 42~45% by the DAF system. That is, Microbial bacteria were almost completely destroyed by the DOF system. To sum up with, the DOF system was found to be very effective to treat effluent of the wastewater treatment plant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.389-393
• /
• 2000

High-quality $Er^{3+}$ doped Mg : $LiNbO_3$single crystal fibers were grown by a micro-pulling down ($\mu$-PD) method. Single crystal fibers were pulled down through the nozzle, at a pulling down rate of 0.5 mm/min and using a Pt crucible with a nozzle 1 mm in diameter in air atmosphere. Defects such as bubbles, cracks and inclusions were not detected in any of the grown crystals. The optical transmission of Er : Mg : $LiNbO_3$crystal was measured and the energy levels of $Er_2O_3$ ion could be calculated. The photoluminescence spectrum of crystal fibers showed an energy band emission with the strongest line corresponding to the $^4I_{3/2}{\to}^4I_{15/2}$transition. The concentration dependence of the entire wavelength region emission intensity upon excitation intensity measured emission intensity for the 3 mol% MgO doped fibers was larger than that for the 1, 5 mol% MgO doped fibers.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.9
• /
• pp.423-429
• /
• 2002

RuOx thin films were fabricated by the method of liquid delivery MOCVD using Ru(C$_{8}$ $H_{13}$ $O_2$)$_3$ as the precursor and their thermal effects and conductivity were investigated. Ru films deposited at 25$0^{\circ}C$ were annealed at $650^{\circ}C$ for 1min with Ar, $N_2$ or N $H_3$ ambient. The changes of the micro-structure, the surface morphology and the electrical resistivity of the Ru films after annealing were studied. Ar gas was more effective than $N_2$ and N $H_3$ gases as an ambient gas for the post annealing of the Ru films, because of smaller resistivity and denser grains. The X-ray diffraction and X-ray photoelectron spectroscopy results indicate that the Ru $O_2$ phase and the silicidation are not observed regardless of the ambient gases. The minimum resistivity of the Ru film is found to have the value of 26.35 $\mu$Ω-cm in Ar ambient. Voids were formed at Ru/TiN interface of the Ru layer after annea1ing in $N_2$ ambient. The $N_2$ gas generated due to the oxidation of the TiN layer accumulated at the Ru/TiN interface, forming bubbles; consequently, the stacked film may peel off the Ru/TiN interface.e.