• Archives of Pharmacal Research
• /
• 제18권1호
• /
• pp.27-30
• /
• 1995

The Hantzsh reaction of 7-hydroxy-8-methoxy-2-oxo-2H-benzopyran-6-carboxaldehyde (1) with ethyl acetoacetate and ammonia yields the dihydropyridine derivative 2 together with the pyridine derivative 3 and the eight membred ring derivative 4. Reaction of 1 with ethyl cyanoacetate and malononitrile gives the iminodicoumarin derivatives 5 and 6 respectiely. The latter compound was reacted with butan-2-one and acetophenone to produce the Michael adduct 71, b and the 2-aminopyridine derivatives 8a, b.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.1911-1914
• /
• 2008

Second-order rate constants (kN) have been measured for Michael-type addition reactions of a series of alicyclic secondary amines to 1-phenyl-2-propyn-1-one (2) in MeCN at 25.0 ${\pm}$ 0.1 ${^{\circ}C}$. All the amines studied are less reactive in MeCN than in $H_2O$ although they are more basic in the aprotic solvent by 7-9 p$K_a$ units. The Bronsted-type plot is linear with $\beta_{nuc}$ = 0.40, which is slightly larger than that reported previously for the corresponding reactions in $H_2O$ ($\beta_{nuc}$ = 0.27). Product analysis has shown that only E-isomer is produced. Kinetic isotope effect is absent for the reactions of 2 with morpholine and deuterated morpholine (i.e., $k^H/k^D$ = 1.0). Thus, the reaction has been concluded to proceed through a stepwise mechanism, in which proton transfer occurs after the rate-determining step. The reaction has been suggested to proceed through a tighter transition state in MeCN than in H2O on the basis of the larger $\beta_{nuc}$ in the aprotic solvent. The nature of the transition state has been proposed to be responsible for the decreased reactivity in the aprotic solvent.

• 대한화학회지
• /
• 제37권2호
• /
• pp.244-248
• /
• 1993

니트로 알코올은 브로모 알코올의 치환반응으로 얻었다. 두번째 니트로 원자단은 사슬 길이에 따라 다른 방법으로 도입했다. 3,3-dinitro-1-propanol은 분자내 염기성 니트로화 반응으로 형성되면 5,5-dinitro-1-pentanol은 산화촉매 니트로화 반응으로 얻었다. 3,3-dinitro-1,6-hexanediol과 4,4-dinitro-1,8-octanediol은 3,3-dinitro-1-propanol과 5,5-dinitro-1-pentanol에 acrolein을 가해 Michael 반응으로 알데히드를 얻고 환원하여 합성했다. 치환반응시 알코올 보호기는 아세틸기가 좋으며 산화촉매 니트로 반응에서는 THP 원자단이 좋은 보호기이다.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.551-555
• /
• 1999

11-Deoxydaunomycinone 15 and 10-fluoroanthracyclinone derivatives 9, 10 were obtained. Naphthalenone 4 prepared from 2-(2,4-pentadienyl)-1,3-dioxane 2 with methyl vinyl ketone and hydrolysis with HClO4 was condensed with phthalidesulfone 5 through Michael type reaction, and was converted to 7 by epoxidation. Epoxide 7 was transformed to trione 12 using reduction-oxidation or hydrofluorination process, and then to 15 by introducing several functional groups. Compound 8 obtained in the course of the reaction of epoxide 7 and HF/ Pyr was used for the synthesis of compounds 9, 10.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1233-1236
• /
• 2010

2,3-Dichloro-1,4-naphtoquinone 1 compound was reacted with octadecanethiol 2 in two different mole ratio. Compound 3 was obtained from the reaction of 1 and 2 in 1:2 mole/mole ratio. Compounds 7 and 8 were obtained from reaction of 1 and 2 in 1:1 mole/mole ratio and known compound 9 was synthesized as by-product in this reaction. Novel compounds 5a-e were obtained from reaction of 1 and related thiols 4a-e. Known compounds 6c and 6e were synthesized as by-product in this reaction. The structures of the compounds were characterized by elemental analysis, UV-vis, FTIR, $^1H$-NMR, $^{13}C$-NMR and Mass spectroscopies.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.723-724
• /
• 2008

• 폴리머
• /
• 제38권2호
• /
• pp.257-264
• /
• 2014

본 연구에서는 나노크기의 실리카 입자를 2차 아미노기를 가지는 dipodal 형태의 실란커플링제인 bis[3-(trimethoxysilyl)propyl]ethylenediamine(BTPED)으로 표면 개질한 후, 실리카에 도입되는 2차 아미노기인 N-H기와 마이클 부가 반응이 가능한 acrylate기를 가지는 3-(acryloyloxy)-2-hydroxypropyl methacrylate(AHM)로 표면 처리를 하여 중합 반응성 methacrylate기를 도입하는 연구를 수행하였다. 1 분자에 2차 아미노기를 2개 가지는 BTPED와 마이클 부가 반응성이 있는 acrylate기와 부가 반응성이 없는 methacrylate기를 각각 1개씩 가지는 AHM을 사용하여 BTPED와 AHM의 투입량 및 개질 반응 시간의 변화가 실리카 표면의 methacrylate기 도입에 미치는 영향을 Fourier transform infrared spectroscopy(FTIR), elemental analysis(EA)와 액체 및 고체 상태 cross polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. 실리카 표면에 BTPED 를 도입하는 반응은 1시간 내에, BTPED로 개질된 실리카의 N-H기에 대한 AHM의 acrylate기와의 마이클 부가 반응에 따른 methacrylate기 도입은 2시간 내에 반응이 각각 완결됨을 확인하였다. 또한 BTPED로 개질된 실리카에 대하여 투입되는 AHM의 몰 비가 증가할수록 N-H기와 acrylate기의 마이클 부가 반응으로 인한 methacrylate기의 도입이 증가하였으며 이는 AHM을 도입했을 때 나타나는 FTIR 스펙트럼의 C=O 피크 면적 변화로 확인하였다. 위의 결과를 EA 및 고체 상태 $^{13}C$ 및 $^{29}Si$ NMR 분석으로도 확인하였다.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.767-772
• /
• 2012

In support of optimizing electrorefining technology for treating spent nuclear fuel, lithium drawdown has been investigated for separating actinides from molten salt electrolyte. Drawdown reaction selectivity is a major issue that requires investigation, since the goal is to remove actinides while leaving the fission products and other components in the salt. A series of lithium drawdown tests with surrogate fission product chlorides was run to obtain selectivity data with non-radioactive salts, develop a predictive model, and draw conclusions about the viability of using this process with actinide-loaded salt. Results of tests with CsCl, $LaCl_3$, $CeCl_3$, and $NdCl_3$ are reported here. Equilibrium was typically achieved in less than 10 hours of contact between lithium metal and molten salt under well-stirred conditions. Maintaining low oxygen and water impurity concentrations (<10 ppm) in the atmosphere was observed to be critical to minimize side reactions and maintain stable salt compositions. An equilibrium model has been formulated and fit to the experimental data. Good fits to the data were achieved. Based on analysis and results obtained to date, it is concluded that clean separation between minor actinides and lanthanides will be difficult to achieve using lithium drawdown.

• 공업화학
• /
• 제9권1호
• /
• pp.155-157
• /
• 1998

디니트라미드 염은 질산 염보다 산소 함량이 증가되어 효과적인 고체 산화제로 쓰일 수 있다. $HNO_3$-TFAA(trifiluoroacetic anhydride)-$Br_2$를 이용하여 4-아자헵탄디산 에스테르에 니트로화 반응을 시킨 후 염기 처리하여 retro-Michael 반응으로 3-니트라미노프로판산 에스테르를 얻었다. 이 니트라미노 화합물에 $NO_2BF_4$를 반응시켜 디니트라미노 화합물을 얻고, 여기에 염기를 첨가하면 디니트라미드 염을 제조할 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제11회 학술강연회논문집
• /
• pp.23-23
• /
• 1998

Michael Reaction을 이용하여 상업적으로 이용 가능한 APS(3-aminopropyltrime thoxysilane)과 AEAPS(N-[3-(trimethoxysilyl)propy1] ethylenediamine)을 다수의 Michael acceptor(ethyl acrylate, acrylonitrile, acrylamide, 2-cyanoethyl acrylate, 2-hydroxyethyl acrylate 그리고 3-(trimethoxysilyl)propylmethacrylate)와 반응시켜 10종류의 aminosilane ([3-｛N-2-carboethoxyethyl)aminopropyl]triethoxysilane, [3-(N-2-cyanoethyl)aminopropyl] triethoxysilane, [3-(N-di-2-carboethoxyethyl) aminopropyl]triethoxysilane, [3-(N-di-2-cyanoethyl)aminopropyl]triethoxysilane, [3-(N-2-cyanoethoxypropionyl)aminopropyl] triethoxysilane, [3-(N-di-2-cyanoethoxypropionyl)aminopropyl] triethoxysilane, [3-(N-di-2-hydroxyethoxypropionyl) aminopropyl]-triethoxysilane, [3-(N-2-amidoethyl aminopropyl]triethoxysilane, ｛3-[N-(N-di-2-cyanoethyl)ethyl]aminopropyl)triethoxysilane, ｛3-[N-(3-trimethoxy-silylpropyl)-2-methylpropionyl]aminopropyl)triethoxysilane 등을 35-70% 수율로 제조하였으며, 이들의 구조는 $^1$H-NMR과 FT-IR spectroscopy를 이용하여 확인하였다.