• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.225-228
• /
• 2001

Partial discharge(PD) testing for different capacitive couplers was performed on a 6.6kV, 448kW pulverizer motor. The motor has been in service for twenty years. PD tests were measured using digital partial discharge detector(DPDD) and partial discharge analyzer(PDA), respectively. PDA is used to in the motor stator insulation, which three 80pF or three 500pF epoxy-mica couplers were installed, one per phase. The 500pF couplers did detect more normalized quantity number(NQN) than the 80pF couplers. DPDD and PDA showed that PD and NQN magnitudes increased with increase of ac voltage. Internal discharge was discovered in the motor stator insulation. DPDD and PDA test results are in accordance with the pattern and magnitude of PD.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1692-1695
• /
• 1997

This paper describes the relationship between the various non-destructive parameters and the breakdown voltage for the 17 kV, 300 MVA and the 22 kV, 500 MVA generators stator bars with polyester and epoxy/mica insulation respectively. Also, this study reports the results of an investigation into the factors which can assess the insulation condition of generator stator winding. Furthermore, a new parameter, Partial Discharge Index(PDI), is introduced as the valuable parameter for the assessment of insulation condition. The ratio between partial discharge increment and the stepwise voltage increment from the Discharge Inception Voltage (DIV) at the characteristic or resonant frequency band shows the close relationship between the breakdown voltage and PDI.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1376-1378
• /
• 1997

Mechanical and electrical properties of mica/epoxy composite materials were investigated by dynamic mechanical analyzer(DMA) and dielectric analysis (DMA). Both modulus and permittivity of sound specimens were higher than those of aged specimens. Two results show that $tan{\delta}$ of sound specimens is lower than that of aged specimens. DMA results showed that glass transition temperatures of sound and aged specimens are observed to be $87.16^{\circ}C$ and $88.38^{\circ}C$, which increases with the increase of aging time.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.238-240
• /
• 2004

인간과 컴퓨터와 사물이 유기적으로 연계되어 다양하고 편리한 새로운 서비스를 제공해 주는 유비쿼터스 컴퓨팅 환경에서, 외부 환경의 감지와 제어 기능을 수행하는 센서 네트워크 기술이 최근 활발히 연구가 되고 있다. 이러한 센서 네트워크 기술은 저전력 저가격의 무선 통신 기술, 초소형 마이크로 프로세서 기술, 자동구성 이 가능한 ad-hoc 네트워크 기술, MEMS기술, 다양한 종류의 센서들과 이들의 표준화 노력, 그리고 임베디드 시스템 기술등의 발전으로 실현이 가능한 기술로서 평가되고 있다. 본 논문에서는 무선 센서 노드인 MICA2[1]와 자기장센서 HMC1002[2]를 이용하여 자기장의 변동을 감지하여 자성체의 위치를 파악하는 시스템의 설계 및 구현을 다룬다.

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.115-125
• /
• 1988

지금까지 발전기 전동기 및 전력용 변합기와 같은 중전기에 사용되고 있는 복합절연재료인 유리섬유 강화프라스틱은 단가가 높고, 기계적 특성이 비등방성이며 기게적 응력이나 서어비스 중에 계면보이드의 발생으로 문제성이 제기되어 왔다. 이러한 결점을 해소하기 위하여 플레이크상의 필라에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 대표적인 플레이크상 재료인 마이카를 이용하여 현재 대형 발전기나 전동기의 고정자 권선 절연용으로 연구 개발되고 있는 마이카 페이프/에폭시 복합재료를 제작한 후, 이 재료의 전기적 및 기계적 특성과 최적 제작조건 등에 실험적으로 고찰하였다. 특히 아미노 실란 게면 결합제를 필라에 적용하여 시료의 전기적 및 기계적 특성에 미치는 효과를 검토하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.116-119
• /
• 2003

$Ni_2$MnGa films, deposited on mica and glass substrates, were studied by ferromagnetic resonance (FMR) technology. The temperature-dependent resonance field was measured and a martensitic phase transformation (MT) was found between 310 and 340 K, exhibiting an abnormality on the curve. The easy axis is found to be in the film plane. The line width increases as a whole with decreasing temperature, which is discussed in terms of the motional narrowing mechanism. The resonance field was also measured as a function of orientation and the results were fitted, exhibiting a good consistence.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2091-2093
• /
• 2005

Five model coils of 6.6kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals, respectively The voltage applied to the coils was 3.81kV, 4.76kV, 6.0kV and 6.6kV. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector (PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns coincide with both PDD and TGA.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2097-2099
• /
• 2005

Class-F and class-B insulating materials based on the resin rich type mica-epoxy composites for the stator windings in large turbine generators have been developed by DHIC. In recent, stator winding bars applied with prototype insulation tapes and commercially available resin rich groundwall tapes were produced through the same manufacturing processes as the real bars. Comparative tests to obtain the insulation properties of both bars were carried out such as IR/PI. dissipation factor and partial discharge at room temperature. In this paper, the manufacturing processes and the insulation properties of the bars which were not aged are presented.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.79-80
• /
• 2006

From a viewpoint of heat stress at high temperatures and contact thermal resistance, it is confirmed that the optimal structure is the skeleton structure using Cu substrate on the cooling side, which has excellent heat conductivity and the optimal installation method is to adopt a carbon sheet and a mica sheet to the high temperature side, where Si grease is applied to the low temperature side, under pressurized condition. The power of the developed modules indicated 0.5W in an $FeSi_2$ module and 3.8 W with a SiGe module at 823K, respectively.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.460-468
• /
• 2005

The biotin-avidin complex, as a model recognition system, has been constructed through N-hydroxysuccinimide(NHS) reaction on a variety of substrates such as a smooth Au film, electrochemically roughened Au electrode and chemically modified mica. Stepwise self-assembled monolayers (SAMs) of biotin-avidin system were characterized by surface-enhanced resonance Raman scattering (SERRS) spectroscopy, atomic force microscopy (AFM) and surface plasmon resonance (SPR). A strong SERRS signal of rhodamine tags labeled in avidin from the SAMs on a roughened gold electrode indicated the successful complex formation of stepwise biotin-avidin recognition system. AFM images showed the circular shaped avidin aggregates (hexamer) with ca. $60{\AA}$ thick on the substrate, corresponding to one layer of avidin. The surface coverage and concentration of avidin molecules were estimated to be 90% and $7.5{\times}10^{-12}mol/cm^2$, respectively. SPR technique allowed one to monitor the surface reaction of the specific recognition with high sensitivity and precision.