• 제목/요약/키워드: MgO-$TiO_2$ content

검색결과 76건 처리시간 0.026초

Ba치환된 $Pb(Mg_{1/3}Nb_{2/3})O_3$-$PbTiO_3$-$PbZrO_3$계 세라믹스의 압전 및 변위특성에 관한 연구 (Piezoelectric and strain characteristics of PMN-PT-PZ ceramics with Ba addition)

  • 지승한;이덕출;이능헌
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제10권1호
    • /
    • pp.20-25
    • /
    • 1997
  • In this study, piezoelectric actuator samples were fabricated using 0.375PMN-0.37OPT-0.255PZ system ceramics with Barium substitution and the strain properties of them were investigated. Dielectric constant of the specimens increased with the increase of Ba content up to 5mol% and decreased with futher addition of Ba. The largest piezoelectric coefficient and electromechanical coupling coefficient were observed at the sintering temperature of 1250'C and Barium content of 5mol%. The characteristics of strain hysteresis was found largely with varing the sintering temperature on the single round type, and the strain is proportional to piezoelectric coefficient.

  • PDF

Influences of the Addition of Hydride-Forming Elements and Oxide and Hydriding-Dehydriding Cycling on the Hydriding and Dehydriding Characteristics of Mg

  • Song, Myoung Youp;Kwak, Young Jun;Park, Hye Ryoung
    • 대한금속재료학회지
    • /
    • 제50권5호
    • /
    • pp.375-381
    • /
    • 2012
  • Magnesium prepared by mechanical grinding under $H_2$ (reactive mechanical grinding) with transition elements or oxides showed relatively high hydriding and dehydriding rates when the content of additives was about 20 wt%. Ni was chosen as a transition element to be added. $Fe_2O_3$ was selected as an oxide to be added. Ti was also selected since it was considered to increase the hydriding and dehydriding rates by forming Ti hydride. A sample $Mg-14Ni-3Fe_2O_3-3Ti$ was prepared by reactive mechanical grinding, and its hydrogen storage properties were examined. This sample absorbs 4.02 wt% H for 5 min, and 4.15 wt% H for 10 min, and 4.42 wt% H for 60 min at n = 2. It desorbs 2.46 wt% H for 10 min, 3.98 wt% H for 30 min, and 4.20 wt% H for 60 min at n = 2. The effects of the Ni, $3Fe_2O_3$, and Ti addition, and hydriding-dehydriding cycling were discussed.

Bi1/2(Na0.8K0.2)1/2TiO3 세라믹스의 유전 및 압전 특성에 대한 Bi(Mg1/2Sn1/2)O3 변성 효과 (Effects of Bi(Mg1/2Sn1/2)O3 Modification on the Dielectric and Piezoelectric Properties of Bi1/2(Na0.8K0.2)1/2TiO3 Ceramics)

  • 팜키남;딘치힌;이현영;공영민;이재신
    • 한국세라믹학회지
    • /
    • 제49권3호
    • /
    • pp.266-271
    • /
    • 2012
  • The effect of $Bi(Mg_{1/2}Sn_{1/2})O_3$ (BMS) modification on the crystal structure, ferroelectric and piezoelectric properties of $Bi_{1/2}(Na_{0.8}K_{0.2})_{1/2}TiO_3$ (BNKT) ceramics has been investigated. The BMS-substitution induced a transition from a ferroelectric (FE) tetragonal to a nonpolar pseudocubic phase, leading to degradations in the remnant polarization, coercive field, and piezoelectric coefficient $d_{33}$. However, the electric-field-induced strain was significantly enhanced by the BMS substitution-induced phase transition and reached a highest value of $S_{max}/E_{max}$ = 633 pm/V under an applied electric field of 6 kV/mm when the BMS content reached 6 mol%. The abnormal enhancement in strain was attributed to the field-induced transition of the pseudocubic symmetry to other asymmetrical structure, which was not clarified in this work.

Microwave Dielectric Properties of MgTiO3, MgTa2O6/Polytetrafluoroethylene Composite

  • Jeon, Chang-Jun;Kim, Eung-Soo
    • 한국세라믹학회지
    • /
    • 제49권3호
    • /
    • pp.272-278
    • /
    • 2012
  • Effects of ceramics on the microwave dielectric properties of polytetrafluoroethylene (PTFE) composites filled with $MgTiO_3$ (MTi) and/or $MgTa_2O_6$ (MTa) were investigated. The dielectric constant ($K$), quality factor ($Qf$), and temperature coefficient of resonant frequency ($TCF$) of the composites were dependent on the type and volume fraction ($V_f$) of the ceramics. For the composites mixed with MTa and MTi, the $K$ and $TCF$ values decreased with increasing MTi content. The $Qf$ values of the composites were affected by relative density. The measured $K$ values of the composites were compared with those predicted by several theoretical models. Good microwave dielectric properties with values of $K$=3.6, $Qf$ = 7,788 GHz, and $TCF$ = -0.19 ppm/$^{\circ}C$ were obtained for the composites with 0.1 $V_f$ ceramics (mixed 0.025MTa and 0.075MTi).

자전연소합성법에 의해 제조된 BaTiO3 분말의 소결특성에 미치는 첨가제의 영향 (The Effect of Adittives on the Sintering Properties of Barium Titanate Powder Prepared by Self-propagating High-temperature Synthesis)

  • 임성재;신창윤;원형일;원창환
    • 한국분말재료학회지
    • /
    • 제13권2호
    • /
    • pp.129-137
    • /
    • 2006
  • In this study, high purity fine $BaTiO_3$ powders were prepared by SHS (Self-propagating High-temperature Synthesis). We would examinate the study of sintering properties and characteristics as a function of temperature with various additives (binder, sintering agent). In separately binder addition, the green and sintered density of specimen were increased as binder content increases. The increased porosity resulted in fine grain size due to the inhibition of grain boundary moving. The $Al_{2}O_{3},\;TiO_{2}$ and MgO playa role of increasing dielectric constants at room temperature. These values were decreased at curie temperature. In case of $SiO_2$, the Curie temperature was decreased. In this study, a high dielectric ceramic capacitor material with temperature stability was synthesized by using various additives.

Milling 조건에 따른 BaTiO3의 저온 소결성 및 전기적 특성 변화 (Effect of Milling Condition on Low-temperature Sinterability and Electrical Properties of BaTiO3 Ceramics)

  • 홍민희;손성범;김영태;허강헌
    • 한국세라믹학회지
    • /
    • 제46권2호
    • /
    • pp.200-210
    • /
    • 2009
  • It is necessary to minimize the mismatch of sintering shrinkage between dielectric ceramic and Ni inner electrode layers for the purpose of developing the ultra high-capacity multi layered ceramic condenser(MLCC). Thus, low temperature sintering of dielectric $BaTiO_3$ ceramic should be precedently investigated. In this work, the influence of the milling condition on sintering behavior and electrical properties of $BaTiO_3$ ceramics was investigated in the $BaTiO_3$(BT)-Mg-Dy-Mn-Ba system with borosilicate glass as a sintering agent. As milling time increased, specific surface area(SSA) of the powder increased linearly, while both sinterability and dielectric property were found to be drastically decreased with an increasing SSA. It was also revealed that the sinterability of the excessively milled $BaTiO_3$ ceramics could be recovered by increasing Ba content, rather than increasing glass addition. These results suggest that the sintering behavior of $BaTiO_3$ ceramics under the high SSA was more strongly dependent on the transient liquid phase caused by Ba addition, than the liquid phase from additional glass.

강릉 보광리 분청도편의 성분과 미세구조 연구 (Composition and Microstructure of Punch'ong Sherds from Bokwang-ri, Kangnung)

  • 김경남;한상목;신대용
    • 보존과학회지
    • /
    • 제8권1호
    • /
    • pp.10-15
    • /
    • 1999
  • 강릉 보광리 도요지에서 출토된 분청 도편의 성분과 미세구조의 특징을 EDS부착의 주사전자현미경과 X선 회절분석기, 열팽창측정기를 이용하여 조사하였다. 도편의 태토 성분은 $SiO_2(73-78\%),\;Al_2O_3(13-16\%)$, $RO{\cdot}R_2O(4-5\%,\;R=Ca,\;Mg,\;Na,\;K),\;R_xO_y(3-6\%,\;R=Fe,Ti)$로 구성되어 있으며, $SiO_2$의 양은 많은 편이나 $Al_2O_3$의 양은 적은 편이었다. 유약은 CaO 함량이 $21-30\%$로 높은 것으로 보아 석회계열의 유약으로 생각된다. 또한 도편의 소성온도는 $1150^{\circ}C$부근의 온도로 추정된다.

  • PDF

ZnO 첨가에 따른 PMW-PNN-PZT 세라믹스의 유전 및 압전 특성 (Dielectric and Piezoelectric Properties of PMW-PNN-PZT Ceramics As a Function of ZnO Addition)

  • 라철민;류주현
    • 한국전기전자재료학회논문지
    • /
    • 제28권3호
    • /
    • pp.165-169
    • /
    • 2015
  • In this paper, in order to develop the composition ceramics with the excellent dielectric properties, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$ ceramics were fabricated by the conventional solid-state method. The effects of ZnO addition on their microstructure and piezoelectric properties were systematically investigated. The rhombohedral-tetragonal phase coexistence has been found in the ceramics without ZnO content and then with further increasing ZnO content, specimens exhibited tetragonal phase. The optimized ZnO content formed liquid phase and aided the grain growth of specimens. When 0.4 wt% ZnO was added, the optimal physical properties ($d_{33}=422pC/N$, $d_{31}=161pC/N$, ${\varepsilon}_r=1,905$, $k_p=0.55$, $Q_m=160$) were obtained.

함평지역 백악기 화산암류에 대한 암석학적 연구 (Petrology of the Cretaceous Volcanic Rocks in the Hampyeong Area)

  • 조동현;윤성효;고정선
    • 암석학회지
    • /
    • 제18권2호
    • /
    • pp.93-114
    • /
    • 2009
  • 옥천대 서남부에 위치한 함평 지역의 백악기 화산암류에 대하여 암석학적, 암석화학적 특성 및 조구적 위치에 대하여 야외지질조사와 주원소, 미량원소 및 희토류원소의 분석을 통하여 수행하였다. 화산암류의 $SiO_2$함량 범위는 50.8${\sim}$77.2 wt.%이며, $SiO_2$함량이 증가함에 따라 $Al_2O_3$, $Fe_2O_3\;^T$, $TiO_2$, MnO, CaO와 MgO 함량은 감소, $K_2O$함량은 증가하는 경향을 보이나, $Na_2O$함량은 경향에서 벗어나 다소 분산된다. TAS성분도와 AFM성분도에서, 함평 지역의 백악기 화산암류는 칼크-알칼리암계열에 속하며, $SiO_2$에 대한 $K_2O$의 성분도에서는 고-K 암석계열에 속한다. 특징적으로 높은 LILE/HFSE 비와 LREE 원소의 부화 현상을 보여주는 화산암류의 미량원소 함량과 희토류원소의 변화 경향은 섭입대 환경에 연관된 대륙연변호의 칼크-알칼리암의 전형적인 특성을 보여준다. Ba/Ta와 Ba/La의 비에서도 화산호 환경에서의 마그마 작용에 연관되어 있음을 지시한다. 함평지역의 백악기 화산암류는 백악기 동안 태평양형 지체구조 환경에 연관된 유라시아 대륙판의 경계부에 위치한다.

기계적 합금화된 TiH2의 수소방출에 따른 미세조직 특성 (MicrostructuraL Characteristics During Hydrogen Desorption of Mechanical Milled TiH2)

  • 정승;정현성;안재평;박종구
    • 한국분말재료학회지
    • /
    • 제13권3호
    • /
    • pp.199-204
    • /
    • 2006
  • We manufactured the metal hydrides of $(Ti_{0.88}Mg_{0.12})H_2$ using a very easy and cheap way that Ti-12%Mg blending powder was mechanically milled with liquid milling media such as isopropyl alcohol ($C_3H_8O$, containing oxygen) and hexane ($C_6H_{14}$, no oxygen) as hydrogen source. The $(Ti_{0.88}Mg_{0.12})H_2$ synthesized in isopropyl alcohol contained the high oxygen of 11.2%, while one in hexane had the low oxygen content of 0.7%. Such a difference of oxygen content affected the dehydriding behavior, phase transformation, and microstructural evolution at high temperature, which was investigated through X-ray diffraction and DSC measurements, and electron microscope observations.