• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.340-350
• /
• 2015

This experiment was carried out to find out the mitigation of greenhouse gases (GHGs) emission and changes of soil carbon contents in the cropland. In order to minimize the soil disturbance, this study was conducted without crop cultivation at the pots treated with different biomass. Different biomass was buried in the soil for 12 months. Decomposition rates of expander rice hull, pig manure compost and carbonized rice hull were 18%, 11~11.5% and 0.5~1.2%, respectively. It was appeared that carbonized rice hull was slightly decomposed. No difference was shown between chemical fertilizer treatment plot and non-application plot. It was appeared that soil carbon content in the non chemical fertilizer application plot was high when compared to its chemical fertilizer. Its content at soil depth of 20 cm more decreased than the upper layer of soil. Accumulative emission of $CO_2$ with different treatments of biomass was highest of 829.0~876.6 g $CO_2m^{-2}$ in the application plot of PMC (Pig Manure Compost) regardless of chemical fertilizer treatment during 16 months of experiment. However, the emission for expander rice hull treatment plot was lowest of 672.3~808.1 g $CO_2m^{-2}$. For application plot of the carbonized rice hull, it was shown that non chemical fertilizer plot, 304.1 mg $N_2Om^{-2}$, was higher than the chemical fertilizer treatment, 271.6 mg $N_2Om^{-2}$. Greenhouse gas emissions in the PMC treatment were highest of 0.94 ton $CO_2eqha^{-1}yr^{-1}$. However, it was estimated to be the lowest in the expander rice hull treatment.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.755-760
• /
• 2019

Compound samples based on the mineral-like magnesium potassium phosphate matrix $MgKPO_4{\times}6H_2O$ were synthesized by solidification of high level waste surrogate. Phase composition and structure of synthesized samples were studied by XRD and SEM methods. Compressive strength of the compounds is $12{\pm}3MPa$. Coefficient of thermal expansion of the samples in the range $250-550^{\circ}C$ is $(11.6{\pm}0.3){\times}10^{-6}1/^{\circ}C$, and coefficient of thermal conductivity in the range $20-500^{\circ}C$ is $0.5W/(m{\times}K)$. Differential leaching rate of elements from the compound, $g/(cm^2{\times}day)$: $Mg-6.7{\times}10^{-6}$, $K-3.0{\times}10^{-4}$, $P-1.2{\times}10^{-4}$, $^{137}Cs-4.6{\times}10^{-7}$; $^{90}Sr-9.6{\times}10^{-7}$; $^{239}Pu-3.7{\times}10^{-9}$, $^{241}Am-9.6{\times}10^{-10}$. Leaching mechanism of radionuclides from the samples at the first 1-2 weeks of the leaching test is determined by dissolution ($^{137}Cs$), wash off ($^{90}Sr$) or diffusion ($^{239}Pu$ and $^{241}Am$) from the compound surface, and when the tests continue to 90-91 days - by surface layer depletion of compound. Since the composition and physico-chemical properties of the compound after irradiation with an electron beam (absorbed dose of 1 MGy) are constant the radiation resistance of compound was established.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.59-61
• /
• 2005

In Korea, hundreds of abandoned and closed coal and metallic mines are present in the steep mountain valleys due to the depression of the mining industry since the late 1980s. From these mines, enormous amounts of coal waste were dumped on the slopes, which causes sedimentation and acid mine drainage (AMD) to be discharged directly into streams causing detrimental effects on soil and water environments. A limestone slurry by-product (lime cake) is produced from the Solvay process in manufacturing soda ash. It has very fine particles, low hydraulic conductivities ($10^{-8}{\sim}10^{-9}cm/sec$), high pH, high EC due to the presence of CaO, MgO and $CaCl_2$ as major components, and traces of heavy metals. Due to these properties, it has potential to be used as a neutralizer for acid-producing materials. A field plot experiment was used to test the application of lime cake for reclaiming coal wastes. Each plot was 20 x 5 m (L x W) in size on a 56% slope. Treatments included a control (waste only), calcite ($CaCO_3$), and lime cake. The lime requirement (LR) for the coal waste to pH 7.0 was determined and treatments consisted of adding 100%, 50%, and 25% of the LR. The lime cake and calcite were also applied in either a layer between the coal waste and topsoil or mixed into the topsoil and coal waste. Each plot was hydroseeded with grasses and planted with trees. In each plot, surface runoff and subsurface water were collected. The lime cake treatments increased the pH of coal waste from 3.5 to 6, and neutralized the pH of the runoff and leachate of the coal waste from 4.3 to 6.7.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.508-508
• /
• 1996

;The growth of films have considerable interest in the field of superlattice structured multi-layer epitaxy led to realization of new devices concepts. Molecular beam epitaxy (MBE) with in situ observation by reflection high-energy electron diffraction (RHEED) is a key technology for controlled layered growth on the atomic scale in oxide crystal thin films. Also, the combination of radical oxygen source and MBE will certainly accelerate the progress of applications of oxides. In this study, the growth process of single crystal films using by MBE method is discussed taking the oxide materials of Bi-Sr-Ca-Cu family. Oxidation was provided by a flux density of activated oxygen (oxygen radicals) from an rf-excited discharge. Generation of oxygen radicals is obtained in a specially designed radical sources with different types (coil and electrode types). Molecular oxygen was introduced into a quartz tube through a variable leak valve with mass flowmeter. Corresponding to the oxygen flow rate, the pressure of the system ranged from $1{\;}{\times}{\;}10^{-6}{\;}Torr{\;}to{\;}5{\;}{\times}{\;}10^{-5}$ Torr. The base pressure was $1{\;}{\times}{\;}10^{-10}$ Torr. The growth of Bi-oxides was achieved by coevaporation of metal elements and oxygen. In this way a Bi-oxide multilayer structure was prepared on a basal-plane MgO or $SrTiO_3$ substrate. The grown films compiled using RHEED patterns during and after the growth. Futher, the exact observation of oxygen radicals with MBE is an important technology for a approach of growth conditions on stoichiometry and perfection on the atomic scale in oxide. The oxidization degree, which is determined and controlled by the number of activated oxygen when using radical sources of two types, are utilized by voltage locked loop (VLL) method. Coil type is suitable for oxygen radical source than electrode type. The relationship between the flux of oxygen radical and the rf power or oxygen partial pressure estimated. The flux of radicals increases as the rf power increases, and indicates to the frequency change having the the value of about $2{\times}10^{14}{\;}atoms{\;}{\cdots}{\;}cm^{-2}{\;}{\cdots}{\;}S^{-I}$ when the oxygen flow rate of 2.0 seem and rf power 150 W.150 W.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.1
• /
• pp.6-10
• /
• 2007

The a-plane GaN layer on r-plane $Al_2O_3$ substrate is grown by mixed-source hydride vapor phase epitaxy (HVPE). The GaN/InGaN heterostructure is performed by selective area growth (SAG) method. The heterostructure consists of a flown over mixed-sourec are used as gallium (or indium) and nitrogen sources. The gas flow rates of HCl and $NH_3$ are maintained at 10 sccm and 500 sccm, respectively. The temperatures of GaN source zone is $650^{\circ}C$. In case of InGaN, the temperature of source zone is $900^{\circ}C$. The grown temperatures of GaN and InGaN layer are $820^{\circ}C\;and\;850^{\circ}C$, respectively. The EL (electroluminescence) peak of GaN/InGaN heterostructure is at nearly 460 nm and the FWHM (full width at half maximum) is 0.67 eV. These results are demonstrated that the heterostructure of III-nitrides on r-plane sapphire can be successfully grown by mixed-source HVPE with multi-sliding boat system.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.161-166
• /
• 1997

Tissue thromboplastin (tissue factor), a membrane bound glycoprotein is an important initiating factor in blood coagulation cascade, which leads to the formation of thrombin by activating both factor X and IX. Activation of blood coagulation by TF is essential for blood injury, and stimulates the blood coagulation in myocardial infarction, cancer and blood coagulatory diseases. High density lipoprotein, apolipoprotein A-II were known to be biological TF inhibitors. Recently, studies on search for TF inhibitors from natural products have been active in Korea. Among the edible mushrooms screened for inhibitory activities on the TF, Lentinus edodes showed the most strong activity, followd by Agaricus bisporus and Ganoderma lucidium. And the fractionation of the above mushrooms with the chloroform ($CHCl_3$) and ethylacetate (EtOAc) was done and evaluated for the inhibitory activities on TF. In Ganoderma lucidium, $CHCl_3$ fraction and $H_2O$ layer were not active, but EtOAc fraction exhibited a strong inhibitory activity on TF and the $IC_{50}$ value was $1.07{\times}10^{-4}\;g$. In the case of Agaricus bisporus, there were no inhibitory activities on the TF in all of the fractions. $CHCl_3$ fraction and $H_2O$ layer of Lentinus edodes did not show inhibition on the TF but EtOAc fraction showed strong inhibition on the TF, and the $IC_{50}$ value was $7.70{\times}10^{-4}\;g$.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.369-374
• /
• 2006

Six fractions of Salvia miltiorrhiza were tested for their chemopreventive potentials using biochemical markers of carcinogenesis such as quinone reductase (QR), glutathione S-transferase (GST) and glutathione (GSH). Seventy percentage of EtOH extract was potent inducer of QR activity in Hepa1c1c7 murine hepatoma cells. GST activity was increased about 1.4-fold with EtOAc extract at concentration of 50 ${\mu}g/ml$. GSH levels were significantly increased with $H_2O$ extract, 70% EtOH extract and water extract at concentration of 50 ${\mu}g/ml$ (p<0.005). From these results, 70% EtOH extract (250 mg/kg) was intragastrically administered to ICR mice for 14 days. QR, GST and GSH levels were significantly increased with the 70% EtOH treatment. These studies suggest that the 70% EtOH extract of S. miltiorrhiza could be considered as a potential agent for cancer chemoprevention.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.66-73
• /
• 2001

Ivlain objectives of this work arc to investigate basic fouling characteristics and emxts of backpulsing on the fouJing control in the free-end membrane module uo

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.885-890
• /
• 2010

This study was conducted to confirm the application as ingredients of cosmetics through an examination of the function for anti-oxidant activity of the fraction isolated from Pyrus ussuriensis leaves. The dried leaf of Pyrus ussuriensis were extracted with acetone-$H_2O$ (6:4, v/v), concentrated and fractionated with the upper layer of acetone on a separatory funnel. Each fraction was freeze dried, then a portion of acetone soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol as eluents and also used the MIC-gel using a series of aqueous methanol as developing solvent. The isolated compounds were identified by silica-gel TLC. The concentration of total phenolic compound of Pyrus ussuriensis acetate soluble fraction was high, 914 mg/g. The results obtained from the analyses of the anti-oxidanat effects of Pyrus ussuriensis acetate fraction can be summarized as follows: In the result of DPPH scavenging radical activity, Pyrus ussuriensis acetate soluble fraction showed more than 80% at 100 ppm. SOD-like activity of one of Pyrus ussuriensis acetate soluble fractions was 77% at 1000 ppm. Xanthine oxidase inhibition of Pyrus ussuriensis acetate soluble fraction was 38% at 100 ppm. From these results, we confirmed that acetate fraction of Pyrus ussuriensis has a great potential as a natural ingredients with a natural antioxidant and antimicrobial source.