• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.309-317
• /
• 2005

A study on the separation of $^{99}Tc,\;^{94}Nb,\;^{55}Fe,\;^{90}Sr\;and\;^{59/63}Ni$ in various radioactive wastes discharged from nuclear power plants has been performed for a use in their quantification which is indispensible for the evaluation of the radionuclide inventory Ni was recovered along with Ca, Mg, Al, Cr, Ti, Mn, Ce, Na, K, and Cu through the sequential separation procedure of Re(as a surrogate of $^{99}Tc$), Nb, Fe and Sr by anion exchange and Sr-Spec extraction chromatography. In this research, chemical separation of Ni from the co-existing elements was investigated by cation exchange and Ni-Spec extraction chromatography. Precipitation behaviour of Ni and the co-existing elements with dimethylglyoxime(DMG) was investigated in ammonium $citrate/ethanol-H_2O$ and tartaric $acid/acetone-H_2O$ in order to purify separated Ni fractions and to prepare $^{59/63}Ni$ source for the radioactivity measurement using a gas proportional counter. Recovery of Ni separated through ion exchange chromatographic separation procedure was $92.1\%$ with relative standard deviation of $0.9\%$. In addition, recovery of Ni with DMG in the tartaric $acid/acetone-H_2O$ was $85.6\%$ with relative standard deviation of $1.9\%$.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1075-1077
• /
• 2004

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.136-148
• /
• 1988

본 논문은 Epoxy수지에 무기물을 첨가하여 tracking 특성에 미치는 자외선 조사의 영향을 연구하였다. 시료는 Bisphenol A형 Epoxy수지에 충진제 MgO와 Al(OH)$_{3}$를 각각 첨가한 시료와 무기물을 첨가하지 않은 무층진 시료에 대하여 자외선을 조사하여 산화 및 열화현상과 tracking현상을 비교 연구 검토하였다. 그 결과 자외선조사로 인하여 carbonyl기의 생성과 craze의 발생이 있었고 이는 tracking 파괴와 침식을 용이하게 한다. 그리고 Epoxy수지에 충진제를 첨가하므로서 자외선에 의한 열화를 감소시키고 내 tracking성을 향상시킨다.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.509-517
• /
• 2019

The birnessite (7Å manganate, δ-MnO₂) which is a manganese oxide and comprises manganese nodules, is a major manganese mineral on the earth surface and a precursor in the synthesis of todorokite. In this study birnessite was synthesized by three different methods: Feng et al. (2004) and Luo et al. (1998) based on redox reaction and Ma et al. (1999) based on reduction reaction. 12 birnessite samples were synthesized by different combinations of Na⁺ and K⁺ cations based on the base (OH^-) and permanganate (MnO₄^-) reagents in the synthesis. The mineral compositions of synthesized birnessite were identified by XRD, and the two cation ratio in the mineral was measured by ICP. The products obtained after hydrothermal treatment of Mg-buserite, by the precursor of birnessite, was examined by XRD, and then phase transition to todorokite and their characteristics were compared. Our results show that the byproducts and the characteristics of phase transition by each synthetic method have different trends. Hausmannite (γ-Mn₃O₄) and feitknechtite (β-MnOOH) were formed by both methods in the redox reaction mechanism. By Feng et al. (2004)'s method, manganite (γ-MnOOH) phase only appeared when cation was predominantly Na⁺. Two birnessite samples synthesized by redox reaction mechanism showed phase transition to todorokite (10Å manganate, OMS-1) when both NaOH and KMnO₄ were used together. However, single-phase birnessite was formed by Ma et al. (1999)'s method, and phase transition was confirmed only for the sample when the cation was only composed of Na⁺.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.440-446
• /
• 1997

This research has been performed for the fabrication of high quality ferrite plastic magnet. The magnetic properties of S $r_{5.9}$F $e_2$ $O_3$ ferrite bonded magnets by injection moulding with a variety of applied magnetic field were investigated. 0.3wt% CaCO3, 0.2wt% $SiO_2$, 0.5wt% $Al_2$ $O_3$and 0.5wt% N $a_2$ $SiO_3$are added in order to improve the magnetic properties of Sr-ferrite plastic magnets during the powder fabrication. For carbon coating on chemical compound specimen, 5wt% polyvinyl alcohol is added, and then calcinated under $N_2$ environment of 12$25^{\circ}C$. The particle size is distributed from 0.9~1.2${\mu}{\textrm}{m}$ which approximates to the single domain. The obtained Sr ferrite powder is well mixed with silane coupling and calcium stearate of 1wt%. Nest, the specimen is pelleted after kneading each of them with polyamidel2 as a binder. When the temperature of injection and mould were 25$0^{\circ}C$ and 8$0^{\circ}C$ respectively at injection pressure of 200kgf/$\textrm{cm}^2$, the degree of orientation was 85.3% under the applied magnetic field of 12kOe. As the results, when the packing density of Sr ferrite powder was 90wt%, the magnetic properties of Sr ferrite bonded magnet were follows : $_{B}$ $H_{c}$=2.41kOe, Br=3.1kG, (BH)$_{max}$=2.21MgOe. Especially, the Sr-ferrite bonded magnet with 10wt% N $d_2$F $e_{14}$B additive were as follows : $_{B}$ $H_{c}$=2.57kOe, Br=3.14kG and (BH)$_{max}$=2.39MGOe.GOe.GOe.GOe.e.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.298-299
• /
• 2010

Cu(In, Ga)Se2 (CIGS) 박막 태양전지는 Soda lime glass/Mo/CIGS/CdS/ZnO/ITO/Al 의 구조를 가지고 있다. CIGS 화합물은 direct bandgap 구조를 하고 있으며, 광흡수율이 다른 어떤 물질들 보다 뛰어나 박막으로도 충분히 태양광을 흡수할 수 있다. 또한 Ga의 도핑 농도에 따른 밴드갭 조절도 가능하다. 이러한 성질들로 인해 현재 박막태양전지로서 20.1%의 최고효율을 가지고 있다.[1] CIGS 박막 태양전지에서 p-CIGS layer와 스퍼터링으로 증착되는 n-ZnO layer사이의 buffer 층으로 chemical bath deposition (CBD)-CdS 박막을 주로 사용한다. CBD-CdS 박막은 n-ZnO 스퍼터로 증착 시킬 때, CIGS 층의 손상을 최소화하고, 이 두 층 사이에서의 격자상수와 밴드갭의 차이를 줄여주어 CIGS 박막태양전지의 효율을 증가 시키는 역할을 한다. 하지만, Cd (카드뮴)의 심각한 독성과 낮은 밴드갭(2.4eV)으로 인해 CIGS 층에서의 광흡수율을 줄여, CdS를 대체할 새로운 buffer 층의 필요성이 대두되었다.[2] 그 대안으로 ZnS, Zn(O, S, OH), (Zn, Mg)O, In2S3 같은 물질이 연구되고 있다. 현재 CBD-ZnS를 buffer 층으로 사용한 CIGS 박막태양전지의 효율은 최고 18.6%로 CBD-CdS의 최고효율보다는 약 1.5% 낮지만, ZnS가 높은 밴드갭(3.7~3.8eV)과 Cd-free 물질이라는 점에서 CdS를 대체할 물질로 각광받고 있다. 본 연구에서는 기존의 CdS 박막을 제조하는 방법과 같은 방법인 CBD를 이용하여 ZnS 박막을 제조하였다. ZnS 박막을 제조하기 위해서는 Zinc sulfate, Thiourea, 암모니아가 사용된다. 암모니아의 mol 농도에 따른 CBD-ZnS/CIGS 박막태양전지의 효율 변화를 관찰하기 위해 암모니아의 mol 농도는 1 mol, 2 mol, 3 mol, 4 mol, 5 mol, 6 mol, 그 이상의 과량을 사용하여 실험하였다. 실험 결과, 암모니아농도 5 mol에서 효율 13.82%를 확인할 수 있었다. 최고효율을 보인 조건인 암모니아 농도가 5 mol 일 때, Voc는 0.602V, Jsc는 33.109mA/cm2, FF는 69.4%를 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.399-405
• /
• 1998

The effect of each factor on the porosity and mean pore size of cordierite(2Mg$.$2{{{{ {Al}_{2 } {O }_{3 } }}$.$5{{{{ {SiO}_{2 } }}) ceram-ics which have been mainly used for hot gas filter was investigated by using orthogonal array. The poros-ity was observed to increase with the content of graphite added as pore-forming material and decrease with increasing talc size. The effects of the other factors the graphite size sintering temperature and hold-ing time at sintering temperature were observed to be small relatively. In case of mean pore size the ef-fect of talc size on the mean pore size of cordierity was investigated to be the largest. The mean pore size was observed to increase with increasing talc size.

• BMB Reports
• /
• v.36 no.6
• /
• pp.593-596
• /
• 2003

The effects of $N{\omega}$-nitro-L-arginine methylester (L-NAME) and L-arginine on cardiotoxicity that is induced by doxorubicin (Dox) were investigated. A single dose of Dox 15 mg/kg i.p. induced cardiotoxicity, manifested biochemically by a significant elevation of serum creatine phosphokinase (CPK) activity [EC 2.7.3.2]. Moreover, cardiotoxicity was further confirmed by a significant increase in lipid peroxides, measured as malon-di-aldehyde (MDA) in cardiac tissue homogenates. The administration of L-NAME 4 mg/kg/d p.o. in drinking water 5 days before and 3 days after the Dox injection significantly ameliorated the cardiotoxic effects of Dox, judged by the improvement in both serum CPK activity and lipid peroxides in the cardiac tissue homogenates. On the other hand, the administration of L-arginine 70 mg/kg/d p.o. did not protect the cardiac tissues against the toxicity that was induced by the Dox treatment. The findings of this study suggest that L-NAME can attenuate the cardiac dysfunction that is produced by the Dox treatment via the mechanism(s), which may involve the inhibition of the nitric oxide (NO) formation. L-NAME may, therefore, be a beneficial remedy for cardiotoxicity that is induced by Dox and can then be used to improve the therapeutic index of Dox.

• Resources Recycling
• /
• v.10 no.5
• /
• pp.29-35
• /
• 2001

This study was carried out to recover gold, silver and valuable metals from the printed circuit boards (PCBs) of waste computers. PCBs samples were crushed under 1 mm by a shredder and separated into 30% conducting and loft nonconducting materials by an electrostatic separator. The conducting materials contained valuable metals which were then used as feed materials for magnetic separation. 42% of magnetic materials from the conducting materials was removed by magnetic separation as nonvaluable materials and the others, 58% of non magnetic materials, was used as leaching samples containing 0.227 mg/g Au and 0.697 mg/g Ag. Using the materials of leaching from magnetic separation, more than 95% of copper, iron, zinc, nickel and aluminium was dissolved in 2.0M sulfuric acid solution, added with 0.2M hydrogen peroxide at $85^{\circ}C$. Au and Ag were not extracted in this solution. On the other hand, more than 95% of gold and 100% of silver were leached by the selective leaching with a mixed solvent (0.2M($NH_4$)$_2$$S_2$$O_3$,0.02M $CuSO_4$,0.4M $NH_4$OH). Finally, the residues were reacted with a NaCl solution to leach Pb whereas sulfuric acid was used to leach Sn. Recoveries reached 95% and 98% in solution, respectively.

• Journal of Conservation Science
• /
• v.23
• /
• pp.25-37
• /
• 2008

This study focuses on identification of mineralogical and geochemical characteristics and interpretation of raw material sources for prehistoric chlorite beads excavated from Geoseokri site in Boseong and Buntori site in Haenam, Korea. These prehistoric beads consist of three grayish blue ring-shaped beads, one dark green tubular bead and one greenish black tubular bead that show acicular-columnar and fibrous microtexture. The beads are composed of $SiO_2$, $Al_2O_3$, MgO and FeO as majors and a trace amount of $K_2O$, CaO and Na_2O$. Mineral species is mostly chlorite with a small amount of quartz and feldspar. Quantitative analysis indicates that the grayish blue ring-shaped beads and the dark green tubular bead belong to clinochlore and the greenish black tubular bead does to the boundary between clinochlore and sheridantie. Chlorite is a hydrous phyllosilicate mineral and it shows various microtexture of acicular, sheeted, earthy, granular andfibrous shapes. As its hardness is 2, chlorite is easily engraved due to its softness. It has aesthetic worthy as it shows green, black and greenish gray colors and pearly to greasy luster as well. These factors would lead to the extensive use of chloritic beads as ornaments from prehistoric times. Though the mineral sources of the chlorite beads can be found in central western region of Chungnam and Iwon of Hamnam, those areas are too distant from the two relic sites. Instead, chlorite ores commonly occur as altered products in wall rock alteration zone of every hydrothermal deposit. Therefore, it is probable that raw materials of chlorite were supplied from neighboring hydrothermal environment rather than far deposits. The result needs further study to verify raw material provenance interpretation, supply, manufacture and distribution on the basis of archaeological points of view.