• 한국균학회지
• /
• 제22권2호
• /
• pp.122-129
• /
• 1994

표고버섯의 mitochondria에 금속 chelating agent인 10 mM EDTA 및 10 mM o-Phe을 포함하는 10 mM Tris-HCl 완충용액(pH 7.5)으로 48시간 동안 각각 투석처리 하였을 때 mitochondria 내의 철 이온 함량이 투석처리를 하지 않은 대조구에 비하여 각각 74% 및 68% 감소되며, mitochondrial $F_1-ATPase$의 활성도는 대조구에 비하여 각각 56% 및 49%의 활성을 상실하였다. EDTA 투석에 의하여 활성을 상실한 metal-free mitochondrial $F_1-ATPase$는 $0.5\;mM\;Fe^{3+}$과 $0.05\;mM\;Mg^{2+}$에 의하여 각각 81% 및 70%의 활성이 회복되었으며, $Fe^{2+}$에 의해서는 활성이 회복되지 않았다. 또한 이 효소는 $0.5\;mM\;Fe^{3+}$와 $0.05\;mM\;Mg^{2+}$이 공존할 때 95%의 재활성화를 나타내었으며, $Fe^{2+}$와 $Mg^{2+}$의 공존 효과는 없었다. o-Phe으로 투석한 효소도 각 이온에 대하여 EDTA로 투석한 효소와 유사한 결과를 나타내었다. 그러므로, 표고버섯 내의 mitochondrial $F_1-ATPase$는 그 활성을 나타내는 데 있어서 $Fe^{3+}$ 및 $Mg^{2+}$을 필요로 함을 알았다. 기질 ATP에 대한 효소의 Km값은 1.67 mM이나, 효소를 가장 크게 활성화시키는 $0.5\;mM\;Fe^{3+}$와 $0.05\;mM\;Mg^{2+}$이 존재할 때의 Km값은 0.65 mM로서 기질 친화성이 증가되었다.

• 조명전기설비학회논문지
• /
• 제24권2호
• /
• pp.106-112
• /
• 2010

플라즈마 디스플레이 패널(Plasma Hsplay Panel :PDP)이 다른 평판 디스플레이 분야(Liquid Crystal Displays(LCDs) and organic light emitting diodes(OLEDs)등)와 경쟁에서 이기기 위해서는 제품의 고화질화, 저소비전력와 고속구동 등의 성능향상이 필요하다. 본 논문에서는 PDP의 성능향상을 위하여 유전체 보호층으로 쓰이는 MgO 박막에 Fe를 미량 첨가한 박막을 증착하고, 그 특성에 대하여 연구하였다. e-beam 증착법으로 증착된 Fe 도핑 된 MgO 박막의 표면특성과 전기광학적 특성을 4인치 테스트 패널을 제작하여 연구하였다. Fe가 도핑된 MgO 박막을 가지는 PDP는 Fe가 도핑되지 않은 PDP에 비해 낮은 방전전압 특성을 나타내었으며, 이는 박막에서 측정된 2차전자방출계수의 실험결과와 잘 일치되었다. 증착된 박막의 결정성과 표면 거칠기는 XRD 와 AFM 측정방법을 통하여 결정되었다. 또한, Fe가 도핑된 PDP는 고속구동을 위한 향상된 어드레스 방전 늦음의 특성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.355-355
• /
• 2010

The epitaxial growth of MgO film on Fe(001) has been investigated by scanning tunneling microscopy (STM). After confirming the clean Fe(001)-c($2{\times}2$) substrate by STM, Mg was deposited at room temperature (RT) under $O_2$ partial pressure of $10^{-7}\;Torr$. The MgO was grown as clusters, not as an epilayer even after postannealing at $400^{\circ}C$, as shown in Figure (a). On the contrary, when Mg was deposited on Fe(001)-c($2{\times}2$) at RT and post-oxidized through exposing $O_2$ at partial pressure $10^{-7}\;Torr$, the thin-layered film with some clusters was formed. Extended-annealing at $400^{\circ}C$ reduced the cluster density, and finally the single and epitaxial MgO-c($2{\times}2$) film was formed on Fe(001)-c($2{\times}2$) as shown in Figure (b). This ultrathin MgO film formed on Fe is expected to be applied to many technological applications, such as catalysis, microelectronics, and magnetic devices.

• 한국분말재료학회지
• /
• 제19권2호
• /
• pp.146-150
• /
• 2012

The effects of nano $Fe_xC$ addition to superconducting properties of $in$ $situ$ processed $MgB_2$ superconductors was examined. 0.1 wt.% and 1 wt.% nano $Fe_xC$ powders were mixed with boron and magnesium powders by ball milling. The powder mixtures were made into pellets by uniaxial pressing. The pellets were heat-treated at $700^{\circ}C-900^{\circ}C$ in argon atmosphere for $MgB_2$ formation. It was found by powder X-ray diffraction that the raw powders were completely converted into $MgB_2$ after the heat treatment. The superconducting transition temperature ($T_c$) and critical current density ($J_c$), estimated from susceptibility-temperature and $M-H$ curves, were decreased by nano $Fe_xC$ addition. The $T_c$ and $J_c$ decrease by nano $Fe_xC$ addition are attributed to the incorporation of iron and carbon with $MgB_2$ lattices (Fe substitution for Mg and C substitution for B) due to the high reactivity of the nano $Fe_xC$ powder.

• Carbon letters
• /
• 제13권2호
• /
• pp.99-108
• /
• 2012

The sol-gel technique has been studied to fabricate a homogeneous Fe-Mo/MgO catalyst. Ambient effects (air, Ar, and $H_2$) on thermal decomposition of the citrate precursor have been systematically investigated to fabricate an Fe-Mo/MgO catalyst. Severe agglomeration of metal catalyst was observed under thermal decomposition of citrate precursor in air atmosphere. Ar/$H_2$ atmosphere effectively restricted agglomeration of bimetallic catalyst and formation of highly-dispersed Fe-Mo/MgO catalyst with high specific surface-area due to the formation of Fe-Mo nanoclusters within MgO support. High-quality thin-multiwalled carbon nanotubes (t-MWCNTs) with uniform diameters were achieved on a large scale by catalytic decomposition of methane over Fe-Mo/MgO catalyst prepared under Ar-atmosphere. The produced t-MWCNTs had outer diameters in the range of 4-8 nm (average diameter ~6.6 nm) and wall numbers in the range of 4-7 graphenes. The as-synthesized t-MWCNTs showed product yields over 450% relative to the utilized Fe-Mo/MgO catalyst, and indicated a purity of about 85%.

• Journal of Electrochemical Science and Technology
• /
• 제4권3호
• /
• pp.102-107
• /
• 2013

The electrochemical properties of Mg-doped $LiFe_{0.48}Mn_{0.48}Mg_{0.04}PO_4$ and pure $LiFe_{0.5}Mn_{0.5}PO_4$ olivine cathodes are examined and the lattice parameters are refined by Rietveld analysis. The calculated atomic parameters from the refinement show that $Mg^{2+}$ doping has a significant effect in the olivine $LiFeMnPO_4$ structure. The unit cell volume is 297.053(2) ${\AA}^3$ for pure $LiFe_{0.5}Mn_{0.5}PO_4$ and is decreased to 296.177(1) ${\AA}^3$ for Mg-doped $LiFe_{0.48}Mn_{0.48}Mg_{0.04}PO_4$ sample. The doping of $Mg^{2+}$ cation with atomic radius smaller than $Mn^{2+}$ and $Fe^{2+}$ ion induces longer Li-O bond length in $LiO_6$ octahedra of the olivine structure. The larger interstitial sites in $LiO_6$ octahedra facilitate the lithium ion migration and also enhance the diffusion kinetics of olivine cathode material. The $LiFe_{0.48}Mn_{0.48}Mg_{0.04}PO_4$ sample with larger Li-O bond length delivers higher discharge capacities and also notably increases the rate capability of the electrode.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.3-9
• /
• 1993

For comparison, we used Ca and Mg as reducers to produce TiFe hydrogen stroage alloy from Fe and TiO$_2$by the Reduction-Diffusion process. The results obtained were as follow. \circled1 Ca was found to be effective both for reduction and diffusion processes. Moreover, Ca oxide was easily removed in an NH$_4$Cl solution after the reaction. \circled2 In the case of using Ca as a reducer, the Reduction-Diffusion process is considered to take place in the foiling three steps. First, TiO$_2$is reduced to Ti by Ca over 100$0^{\circ}C$. Second, the atomic Ti drifts in the Ca melt and meets Fe particles. Finally, the atomic Ti diffuses in to the Fe particles. \circled3 In the case of using Mg as a reducer, We found that the reduction reaction of TiO$_2$went well. But the reduced Ti scarcely diffused into Fe particles. This was probably because no Mg melt was formed due to the high vapor pressure of Mg.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.61-61
• /
• 2011

Using ab initio calculations, we study the MgO(001) and Fe/MgO(001) surface phases and the effects of interface structure on the Fe/MgO magnetic anisotropy. The surface phase diagrams of MgO(001) and Fe/MgO(001) show that the most stable surface structures are either defect-free surface or the surfaces with oxygen vacancies in c($2{\times}1$) periodicity for the systems. By the formations of the oxygen vacancy rows on MgO(001) surface, the in-plane magnetic anisotropy energy of Fe overlayer is reduced while the perpendicular magnetic anisotropy energy is increased from 0.1 to 0.5 meV per Fe atom.

• 한국주조공학회지
• /
• 제33권6호
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.673-682
• /
• 2017

식물 및 동물성 단백질 유래 펩타이드 형태의 단백질 가수 분해물들은 항산화, 고혈압 완화, 면역조절, 진통완화 및 항균작용 등 생리활성이 있는 것으로 알려져 왔다. 본 연구는 연산오계란 단백질 가수 분해물을 Ultrafiltration를 이용하여 HDS(분획되지 않은 가수 분해물), 1 kDa, 5 kDa, 10 kDa, 50 kDa로 분획된 기능성 펩타이드의 DPPH radical scavenging activity, superoxide anion radical scavenging activity, hydroxyl radical scavenging activity 및 $Fe^{2+}$ chelation ability을 평가하였다. 그 결과 DPPH radical scavenging activity 최대값은 1 kDa(70.83 %), hydroxyl radical scavenging activity 최대값은 5 kDa (47.01 %), superoxide anion radical scavenging activity 최대값은 5 kDa(40.57 %), $Fe^{2+}$ chelation ability 최대값은 5 kDa(29.87 %)로 나타났다. Ultrafiltration를 이용하여 fractionation된 단백질 가수 분해물의 항산화 저해 능력 $IC_{50}$ 평가하였다. 그 결과 HDS의 최대값은 superoxide anion radical scavenging activity($IC_{50}$, 5.42 mg/ml)이고, 1 kDa의 최대값은 $Fe^{2+}$ chelation ability($IC_{50}$, 1.67 mg/ml)이고, 5 kDa의 최대값은 $Fe^{2+}$ chelation ability($IC_{50}$, 2.09 mg/ml)이고, 10 kDa의 최대값은 $Fe^{2+}$ chelation ability($IC_{50}$, 2.61 mg/ml)이고, 50 kDa의 최대값은 $Fe^{2+}$ chelation ability($IC_{50}$, 4.53 mg/ml)이다. 그러므로 본 연구 결과를 바탕으로 5 kDa를 이용하여 오계란 단백질에서 분획한 펩타이드는 항산화 기능성 식품소재로서 활용할 가치가 높을 것으로 기대한다.