• Title/Summary/Keyword: MgFe$_2$

Search Result 2,412, Processing Time 0.028 seconds

Removal of Copper Ion with Iron-Oxide-Coated Sand (산화철 피복사에 의한 구리이온제거)

  • 곽명화;우성훈;김익성;박승조
    • Resources Recycling
    • /
    • v.9 no.1
    • /
    • pp.70-75
    • /
    • 2000
  • The sand particle was coated with $Fe_3O_4$ and then $Fe_2O_3$ that adsorption capacity was more excellent than $Fe_3O_4$ was mostly found in 2nd step for preparation of iron-oxide-coated sand (IOCS). The copper removal rate was 74.9 percent by adding 30 gram per liter iron-oxide-coated sand from the solution with 5 mg/l Cu in 20 minute. Breakthrough time occurred in 23 hours and adsorption capacity 0.87$\cdot$Cu/g$\cdot$IOCS in case of breakthrough copper concentration was 1.0 mg/l in the continuous test.

  • PDF

A Study on Iron Compounds of Volcanic Rock in the Seaside Area of Ulleung Island (울릉도 해안지역 화산암의 철 화합물에 관한 연구)

  • Yoon, In-Seop;Kim, Sun-Bae;Kim, Hyung-Sang
    • Journal of the Korean Magnetics Society
    • /
    • v.20 no.3
    • /
    • pp.114-119
    • /
    • 2010
  • Fe compounds of volcanic rock samples distributed in the seaside area of Ulleung island were investigated by means of X-ray diffractometry (XRD), X-ray fluorescence spectroscopy (XRF) and M$\ddot{o}$ssbauer spectroscopy. We found that samples were typical basic rock which had the total amount of iron compounds including hematite ($\alpha-Fe_2O_3$) varies from 10.6 w% to 14.5 w% depending on the different regions by XRF. The M$\ddot{o}$ssbauer spectra of the samples were consisted of one sextet due to hemitite and doublets due to $Fe^{3+}$ in various clay mineral and $Fe^{2+}$ in pyroxene $(Ca,Fe,Mg)_2(SiO_4)_2$, ilmenite ($FeTiO_3$) and olivine $(Mg,Fe)_2SiO_4$. The balance state of Fe ions of all samples was chiefly $Fe^{3+}$, so we could find that the volcanic rocks distributed in the seaside area of Ulleung island were made in inland.

낙동강 강변여과수 개발부지 지하수 수질의 수직분포 특성

  • 현승규;우남칠;신우식
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2004.09a
    • /
    • pp.321-325
    • /
    • 2004
  • 국내 충적층의 철, 망간 문제는 지속적으로 지적되어오던 수질항목이다. 충적층 지하수 내 철과 망간의 용존 특성을 확인하고자 강변여과수 부지에서 지하수의 수리지화학적 특성을 조사하였다. Fe와 Mn에 의해 오염된 관정은 D-2와 DS-3로 모두 3월에 채취한 시료이며 NO$_3$-N는 모두 0 m/L 이다. NO$_3$-N에 대해 다른 관정은 2 mg/L NO$_3$-N를 넘고 있으며, DS-8와 DS-3에서 11.30과 20.2 mg/L NO$_3$-N의 값으로 먹는물 수질기준을 초과하고 있다. Mn에 대해 오염된 관정은 SJ-3이다. 10월에 채취한 시료에서 DS-2+l8 m에서 채취한 시료가 1.16 mg/L인 것을 제외하고 대부분의 시료가 2 mg/L를 초과하고 있고, DS-6+l3 m과 SJ-3+10 m에서 채취한 시료가 각각 10.71과 10.31 mg/L NO$_3$-N로 먹는물 수질기준을 초과하고 있다. DO 검층 자료와 NO$_3$-N 농도를 이용하여 Fe와 Mn이 먹는물 수질 기준을 초과하는 D-2와 DS-2 관정의 지하수 체의 혐기성 상태임을 확인하였다. 강변여과수 지역은 전반적으로 NO$_3$-N에 대해 인위적인 오염이 발생하고 있으며, 혐기성 상태 구간이 존재함에 따라서 Fe와 Mn이 먹는물 수질 기준을 초과하여 용존 상태로 존재한다.

  • PDF

A Study on Mineral Contents in Domestic Mozzarella Cheese (Mozzarella Cheese의 무기질 함량에 관한 연구)

  • Cha, Gwang-Jong;Yeon, Je-Han;Yu, Je-Hyeon
    • Journal of Dairy Science and Biotechnology
    • /
    • v.14 no.2
    • /
    • pp.147-155
    • /
    • 1996
  • This experiment was carried out to find general composition and mineral contents such as Ca, P, Mg, Na, K and Fe of domestic commercials Mozzarella cheese. Twenty-five products of 5 company were analyzed. The results obtained were as fellow : The average contents of moisture, fat, fat in dry matter, protein and ash in Mozzarella cheese were 49.01, 22.54, 44.16, 24.36 and 2.55%, respectively and average pH was 5.29. The average contents of Ca, P, Mg, Na, K and Fe were 696.44, 466.31, 22.08, 310.8, 82.84 and 0.36mg, respectively. Among products, product C was highest in levels of Ca, P and Mg, which were 797.4, 536.6 and 25.5mg, respectively, Na was highest for product A which contained 450.8mg. K and Fe were highest for product B which contained 98.9 and 0.51mg, respectively. Generally, the ratio of Ca to P was 1.5 : 1 and within the proper range. It was found that 645g of Mozzarella cheese was able to fully meet the daily recommendation of minerals including Ca, P and Na.

  • PDF

From Mine Tailings to Electricity using Ecological Function: Evaluation of Increase in Current Density by Increasing the Oxidation Rate of Pyrite using Iron Oxidizing Bacteria (생태학적 기능을 이용한 광미 활용 전기 생산: 철산화박테리아를 이용한 황철석 산화 속도 증진을 통한 전류 밀도 향상 가능성 평가)

  • Ju, Won Jung;Jho, Eun Hea;Nam, Kyoungphile
    • Ecology and Resilient Infrastructure
    • /
    • v.1 no.1
    • /
    • pp.19-24
    • /
    • 2014
  • The research evaluates the possibility of generating electricity using pyrite containing mine tailings, which are the major cause of acid mine drainage (AMD), by applying iron oxidizing bacteria (in this case, Acidithiobacillus ferrooxidans) and chemical fuel cell technology. The changes in the aqueous $Fe^{2+}$ concentration, which can represent an ionized form of pyrite, with an initial concentration of 9,000 mg/L were investigated during the 20 d growth period. Both the $Fe^{2+}$ and total iron (i.e., total $Fe^{2+}$)concentrations with or without A. ferrooxidans were observed. The $Fe^{2+}$ concentration decreased to about 6,000 mg/L, in the abiotic condition, while it decreased to about 400 mg/L in the biotic condition. The results showed that the increased $Fe^{2+}$ oxidation in the presence of A. ferrooxidans (i.e., catalytic ability of A. ferrooxidans) can be applied to electricity generation using pyrite containing mine tailings. In the co-presence of A. ferrooxidans and pyrite containing mine tailings, $Fe^{2+}$ oxidation and hence electron production increases, which, in turn, improves current density. This study can be applied to utilize ecological functions of indigenous bacteria in mine areas to enhance electricity generation efficiency.

Nutrients Analysis of Mistletoe Cultivated on Prunus mume (매실나무(Prunus mume)를 기주로 한 인공재배 겨우살이의 일반성분분석)

  • Heo, Jeong Won;Azad, Md Obyedul Kalam;Park, Cheol Ho
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2018.04a
    • /
    • pp.73-73
    • /
    • 2018
  • 최근 매실나무를 기주로 한 겨우살이의 인공재배에 성공함에 따라, 식품 소재로 이용하기 위해 일반성분을 분석하였다. 경기도 남양주시에서 매실나무를 기주로 한 인공재배 겨우살이를 채취하여 동결건조한 후 수분, 조단백질, 조지방, 회분, 탄수화물, 베타카로틴, 비타민 B1, 비타민 B2, 비타민 B3, 비타민C, Ca, Fe, K, Na 그리고 P의 함량을 분석하였다. 조단백질, 조지방, 회분, 베타카로틴, Ca, Fe, K, Na 그리고 P은 AOAC 방법을 이용하여 분석하였고, 탄수화물은 탄수화물(%) = 100 - (조단백질% + 조지방% + 회분% + 수분%) 계산식을 활용하여 산출하였다. 수분, 비타민 B1, 비타민 B2, 비타민 B3, 비타민 C는 식품공전에 제시된 방법에 따라 분석하였다. 동결건조한 매실나무겨우살이의 일반성분은 탄수화물 58.90%, 단백질 22.36%, 회분 11.11%, 지방 5.37%, 수분 2.26% 순으로 함유하였다. 비타민의 함량은 비타민 C 4.78mg/100g, 나이아신 1.87mg/100g, 비타민 A 1.42mg/100g, 비타민 B2 0.73mg/100g 그리고 비타민 B1 0.30 mg/100g의 순서로 많이 함유하였다. 무기질은 K 3141.54mg/100g, Ca 977.77mg/100g, P 309.91 mg/100g, Na 20.13mg/100g 그리고 Fe 8,24mg/100g의 순서로 많이 함유하였다.

  • PDF

Evaluation of Magnetic and Thermal Properties of Ferrite Nanoparticles for Biomedical Applications

  • Tomitaka, Asahi;Jeun, Min-Hong;Bae, Seong-Tae;Takemura, Yasushi
    • Journal of Magnetics
    • /
    • v.16 no.2
    • /
    • pp.164-168
    • /
    • 2011
  • Magnetic nanoparticles can potentially be used in drug delivery systems and for hyperthermia therapy. The applicability of $Fe_3O_4$, $CoFe_2O_4$, $MgFe_2O_4$, and $NiFe_2O_4$ nanoparticles for the same was studied by evaluating their magnetization, thermal efficiency, and biocompatibility. $Fe_3O_4$ and $CoFe_2O_4$ nanoparticles exhibited large magnetization. $Fe_3O_4$ and $NiFe_2O_4$ nanoparticles exhibited large induction heating. $MgFe_2O_4$ nanoparticles exhibited low magnetization compared to the other nanoparticles. $NiFe_2O_4$ nanoparticles were found to be cytotoxic, whereas the other nanoparticles were not cytotoxic. This study indicates that $Fe_3O_4$ nanoparticles could be the most suitable ones for hyperthermia therapy.

Thermal Annealing Effect on Ferromagnetic Resonance Properties in CoFeB/MgO Thin Film (CoFeB/MgO 박막 재료의 열처리에 따른 강자성공명 특성)

  • Yoon, Seok-Soo;Kim, Dong-Young
    • Journal of the Korean Magnetics Society
    • /
    • v.21 no.1
    • /
    • pp.10-14
    • /
    • 2011
  • We have measured the ferromagnetic resonance (FMR) signal in as deposited and $400^{\circ}C$ annealed CoFeB/MgO thin film to investigate the annealing effect on magnetic anisotropies and FMR linewidth (${\Delta}H_{PP}$). The uniaxial anisotropy field ($H_{K1}$) was only observed in the as deposited sample. Whereas, in the $400^{\circ}C$ annealed sample, the biaxial anisotropy field ($H_{K2}$) was additionally observed in accompany with uniaxial anisotropy field ($H_{K1}$). The appearance of biaxial anisotropy fields was originated from the crystalline growth of bcc CoFeB(001) from the MgO(001) interface and by the B diffusion during thermal annealing. Also, the ${\Delta}H_{PP}$ of $400^{\circ}C$ annealed sample was increased compared with that of as deposited sample, which was due to the broad distribution of the magnetization axis by the biaxial anisotropy.

Occurrence and Chemical Composition of White Mica and Chlorite from Laminated Quartz Vein of Unsan Au Deposit (운산 금 광상의 엽리상 석영맥에서 산출되는 백색운모와 녹니석의 산상 및 화학조성)

  • Yoo, Bong Chul
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.34 no.1
    • /
    • pp.1-14
    • /
    • 2021
  • The Unsang gold deposit has been one of the three largest deposits (Daeyudong, Kwangyang) in Korea. The geology of this deposit consists of series of host rocks including Precambrian metasedimentary rock and Jurassic Porphyritic granite. The deposit consists of Au-bearing quartz veins which filled fractures along fault zones in Precambrian metasedimentary rock and Jurassic Porphyritic granite, which suggests that it is an orogenic-type deposit. Quartz veins are classified as 1) galena-quartz vein type, 2) pyrrhotite-quartz vein type, 3) pyrite-quartz vein type, 4) pegmatic quartz vein type, 5) muscovite-quartz vein type and 6) simple quartz vein type based on mineral assembles. The studied quartz vein is pyrite-quartz vein type which occurs as sericitization, chloritization and silicification. The white mica from stylolitic seams of laminated quartz vein occurs as fine or medium aggregate associated with white quartz, pyrite, chlorite, rutile, monazite, apatite, K-feldspar, zircon and calcite. The structural formular of white mica from laminated quartz vein is (K0.98-0.86Na0.02-0.00Ca0.01-0.00Ba0.01-0.00 Sr0.00)1.00-0.88(Al1.70-1.57Mg0.22-0.09Fe0.23-0.10Mn0.00Ti0.04-0.02Cr0.01-0.00V0.00Ni0.00)2.06-1.95 (Si3.38-3.17Al0.83-0.62)4.00O10(OH2.00-1.91F0.09-0.00)2.00. It indicated that white mica of laminated quartz vein has less K, Na and Ca, and more Si than theoretical dioctahedral micas. Compositional variations in white mica from laminated quartz vein are caused by phengitic or Tschermark substitution [(Al3+)VI+(Al3+)IV <-> (Fe2+ or Mg2+)VI+(Si4+)IV] and direct (Fe3+)VI <-> (Al3+)VI substitution. The structural formular of chlorite from laminated quartz vein is((Mg1.11-0.80Fe3.69-3.14Mn0.01-0.00Zn0.01-0.00K0.07-0.01Na0.01-0.00Ca0.04-0.01Al1.66-1.09)5.75-5.69 (Si3.49-2.96Al1.04-0.51)4.00O10 (OH)8. It indicated that chlorite of laminated quartz vein has more Si than theoretical chlorite. Compositional variations in chlorite from laminated quartz vein are caused by phengitic or Tschermark substitution (Al3+,VI+Al3+,IV <-> (Fe2+ or Mg2+)VI+(Si4+)IV) and octahedral Fe2+ <-> Mg2+ (Mn2+) substitution. Therefore, laminated quartz vein and alteration minerals of the Unsan Au deposit was formed during ductile shear stage of orogeny.

Y2O3-stabilized ZrO2, Ni, and graphene-added Mg by reactive mechanical grinding processing for hydrogen storage and comparison with Ni and Fe2O3 or MnO-added Mg

  • Song, Myoung Youp;Choi, Eunho;Kwak, Young Jun
    • Journal of Ceramic Processing Research
    • /
    • v.20 no.6
    • /
    • pp.609-616
    • /
    • 2019
  • The optimum powder to ball ratio was examined, which is one of the important conditions in reactive mechanical grinding processing. Yttria (Y2O3)-stabilized zirconia (ZrO2) (YSZ), Ni, and graphene were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Samples with a composition of 92.5 wt% Mg + 2.5 wt% YSZ + 2.5 wt% Ni + 2.5 wt% graphene (designated as Mg-2.5YSZ-2.5Ni-2.5graphene) were prepared by grinding in hydrogen atmosphere. Mg-2.5YSZ-2.5Ni-2.5graphene had a high effective hydrogen-storage capacity of almost 7 wt% (6.85 wt%) at 623 K in 12 bar H2 at the second cycle (n = 2). Mg-2.5YSZ-2.5Ni-2.5graphene contained Mg2Ni phase after hydriding-dehydriding cycling. Mg-2.5YSZ-2.5Ni-2.5graphene had a larger quantity of hydrogen absorbed for 60 min, Ha (60 min), than Mg-2.5Ni-2.5graphene and Mg-2.5graphene. The addition of YSZ also increased the initial dehydriding rate and the quantity of hydrogen released for 60 min, Hd (60 min), compared with those of Mg-2.5Ni-2.5graphene. Y2O3-stabilized ZrO2, Ni, and graphene-added Mg had a higher initial hydriding rate and a larger Ha (60 min) than Fe2O3, MnO, or Ni and Fe2O3-added Mg at n = 1.