• Journal of Korean Biological Nursing Science
• /
• 제23권3호
• /
• pp.180-187
• /
• 2021

Purpose: This study aimed to compare breast milk minerals between mothers with gestational diabetes mellitus (GDM) and healthy mothers. Methods: This study was a short-term prospective study to determine the difference in milk minerals of 30 GDM mothers and 30 healthy mothers. Mineral concentrations in breast milk were measured for Na, K, Ca, Mg, and P. The first breast milk was collected on the 5th day after childbirth, while the second one was collected on the 14th day. For the variation of mineral content of breast milk over time between groups, generalized estimation equations were used. Results: The mean age of the GDM group and healthy mother group was 32.56 and 31.17 years old, respectively. Na was significantly higher in GDM mother group (Wild 𝛘²=4.35, p=.037) over time (Wild 𝛘²=21.59, p<.001), and Ca was significantly higher in healthy mother group (Wild 𝛘²=1.77, p=.018) over time (Wild 𝛘²=19.09, p<.001). Mg, P, and K showed a significant difference in time (Wild 𝛘²=18.12, p<.001; Wild 𝛘²=7.73, p=.005; Wild 𝛘²=7.10, p=.008). P was significantly higher in GDM mother group on 5th day of delivery (t=2.08, p=.042). Conclusion: There was a difference in the mineral composition of breast milk between GDM mothers and healthy mothers. Therefore, it is necessary to develop and apply intervention programs such as effective prenatal blood sugar management and postpartum breast massage considering the characteristics of GDM mothers.

• 분석과학
• /
• 제28권2호
• /
• pp.79-85
• /
• 2015

TLC (SiO₂) 상에서 3가지 유사 암페타민 류 아민 화합물과 3가지 유도체화 시약 사이의 반응으로부터 얻어진 아민유도체의 이미지 분석으로부터 암페타민 류 화합물에 대한 신속하고 경제적인 반정량적인 분석방법을 제시하기 위하여 선행 실험을 하였다. TLC상 직접적인(in situ, co-spot) 유도체화 반응의 적정화를 시도하였고 그 TLC 결과물들을 디지털카메라로 촬영하여 이미지를 얻은 후 2가지의 이미지 분석 프로그램(CP Atlas 2.0 및 ImageJ)에 적용하여 재현성(RSD; %)과 상관성(R²)을 각각 확인 및 비교하였다. 그 결과, 반응 조건에 대한 조정이 필요하였고(반응 온도 등) 각 시료별 2가지의 농도(0.5 mg/mL 및 0.01 mg/mL)에서 반응의 재현성은 0.69~5.50% 범위이었으며 반응(2 µL per spot)의 생성물과 아민의 농도에 대한 상관성은 0.1~0.005 mg/mL의 농도 구간에서 가장 높게 나타났다(R²> 0.9906). 또한, 두 가지 프로그램 모두 재현성과 직선성에 대한 유사한 결과를 나타내어 직접적인 유도체화 반응과 TLC 이미지에 대한 이들 프로그램을 사용한 분석이 아민 화합물에 대한 반정량적인 분석으로 사용될 수 있는 가능성을 보였다.

• 한국수산과학회지
• /
• 제55권3호
• /
• pp.328-337
• /
• 2022

This study investigated the removal performance of a foam fractionator under seawater conditions. The foam fractionator was tested using a 3×3×3 factorial design for operating conditions by combining different solids concentrations (SS; 1, 5, and 10 mg·L^-1), surface air velocities (SAV; 1.1, 1.5, and 2.1 cm·sec^-1), and hydraulic residence times (HRT; 1, 3, and 6 min) at 16℃. Performance parameters such as daily solids removal rate and efficiency were measured, and a multi-regression model equation was developed accordingly. The daily solids removal rate and removal efficiency varied with the experimental conditions and ranged from 0.14-2.33 g-solids·m^-3-air·day^-1 and 8.9-96.7 %, respectively. Overall, the daily solids removal rate increased with increasing SS and SAV and decreasing HRT, whereas the removal efficiency increased with increasing SAV and HRT and decreasing SS. The daily solids removal rate (g-solids·m^-3-air·day^-1) of the foam fractionator for SAV (cm·sec^-1), SS (mg·L^-1) and HRT (min) were described by the following multi-regression model: Daily solids removal rate [f(z)]=-0.118+0.422SAV+0.094HRT+0.141SS (r²=0.873).

• 한국환경과학회지
• /
• 제29권7호
• /
• pp.739-748
• /
• 2020

The characteristics of heavy metal ion (Ni²⁺, Zn²⁺, and Cr³⁺) adsorption by zeolite synthesized from Jeju scoria using the fusion and hydrothermal method, were studied. The synthetic zeolite was identified as a Na-A zeolite by X-ray diffraction analysis and scanning electron microscopy images. The equilibrium of heavy metal ion adsorption by synthetic zeolite was reached within 60 min for Ni²⁺ and Zn²⁺, and 90 min for Cr³⁺. The uptake of heavy metal ions increased with increasing pH in the range of pH 3-6 and the uptake decreased in the order of Cr³⁺ > Zn²⁺ > Ni²⁺. For initial heavy metal concentrations of 20-250 mg/L at nonadjusted pH, the adsoption of heavy metal ions was well described by the pseudo second-order kinetic model and was well fitted by the Langmuir isotherm model. The maximum uptake of heavy metal ions obtained from the Langmuir model, decreased in the order of Zn²⁺ > Ni²⁺ > Cr³⁺, differing from the effect of pH on the uptake, which was mainly based on the different pH of the solutions.

• Journal of Plant Biotechnology
• /
• 제47권3호
• /
• pp.242-247
• /
• 2020

본 실험은 딸기 조직배양 시 증식률 향상을 위해 coconut water의 적정처리 농도 구명하고자 실시하였다. 본 실험에 사용된 시험 품종은 '매향'이며, BA 0.5 mg·L^-1와 IBA 0.1 mg·L^-1을 혼합처리한 배지에 coconut water를 0, 20, 40, 60, 80, 100 ml·L^-1로 첨가하여 실험하였다. Coconut water 처리 시 형태적 변이검정과 SSR 검정을 통해 변이 발생 유무를 확인하였다. '매향'은 무처리에 비해 coconut water 처리에서 증식률이 향상되었으며, 특히 coconut water 100 ml·L^-1 처리에서 증식률이 약 4배 향상되었다. '매향'에 coconut water 100 ml·L^-1 처리 시 형태적 변이체가 2개체 발생하였으나 유전적 차이는 보이지 않았다. 따라서 '매향' 조직배양 시 coconut water 100 ml·L^-1를 처리하면 유전적 변이없이 대량증식이 가능할 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.165-171
• /
• 2002

본 연구는 마루판의 천연무늬단판 접착에 이용되고 있는 요소-멜라민 접착제의 수지조성에 따른 접착성능 및 포름알데히드 방출량의 변화를 알아보고자 하였다. 요소에 멜라민에 대한 포름알데히드의 몰비 1.0, 1.1, 1.2, 1.4를 기준으로 제조된 접착제로 마루판용 합판과 섬유판에 천연무늬단판을 접착한 목질마루판에 의해 시험을 실시하였다. 그 결과는 화학양론적으로 멜라민-요소와 포름알데히드간의 비율이 적정한 조건에서 반응이 충분히 일어난 경우에 상태접착력, 준내수접착력, 포름알데히드 방출량 등이 가장 양호하게 나타났다. 복합마루판의 평면인장강도는 각 몰비에서 14 kgf/cm²를 상회하였으며, 포름알데히드 방출량은 1.0몰비에서 9.53 mg/L로 가장 낮게 나타났다. 합판마루판의 평면인장 접착력 시험에서는 1.4몰비에서 14.02 kgf/cm²로 가장 높은 값을 보였다. 합판마루판의 포름알데히드 방출량 조사에서도 1.0목비에서 0.26 mg/L로 가장 낮게 나타났다.

• 한국환경농학회지
• /
• 제27권4호
• /
• pp.382-388
• /
• 2008

This study was initiated to elucidate the relation between the toxicity of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ and sludge age (Solids retention time, SRT). The effect of SRT on the toxicity of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ in activated sludge system was investigated with INT-dehydrogenase assay. Experimental results showed that the inhibitory effects of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ were reduced as the sludge age increased from SRT 5 d to SRT 25 d. It is noteworthy that the experimental results enabled to determine the relative toxicity of the tested metals depending on the sludge age. At the SRT of 5 and 9 days, the order of toxicity of the three metals to the activated sludge was $Cr^{6+}$ > $Zn^{2+}$ > $Cd^{2+}$ (the $IC_{50}$ value of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ was 16.15, 25.90, and 32.49 mg/L, respectively) and $Zn^{2+}$ > $Cr^{6+}$ > $Cd^{2+}$ (the $IC_{50}$ value of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ was 39.12, 27.93, and 42.31 mg/L, respectively), respectively. However, the toxicity of three metals was almost same at the SRT of 14 and 25 days (the range of $IC_{50}$ in SRT 14 and 25 days was from 49.80 mg/ L to 53.44 mg/L among three heavy metals). This results would be explained by that the quantity of biopolymer formed in short SRT was small, whereas that in long SRT was large. Consequently, it is recommended that sludge age be maintained at long SRT in order to avoid the toxicity inhibition of heavy metals such as $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1171-1181
• /
• 2023

In this study, a sweep gas - vacuum hybrid type membrane degassing process was proposed for ammonia wastewater treatment. In addition, the ammonia selective recovery of the hybrid type membrane degassing process was also investigated. As a result, the hybrid type membrane degassing process showed better degassing performance (54.9 mg NH₃/m²min for 360 min) than the sweep gas type (32.3 mg NH₃/m²min) or vacuum type (22 mg NH₃/m²min). Additionally, the hybrid type membrane degassing process showed an excellent ammonia selectivity (103 times compared to Na+ Na⁺, 133 times compared to Ca²⁺). The ammonia selectivity was appeared to be due to the conversion characteristics of ammonium ion / dissolved ammonia depending on pH. The results in this study are expected to be used in the development of ammonia wastewater treatment and ammonia recovery in the future.

• Journal of Radiation Protection and Research
• /
• 제46권2호
• /
• pp.58-65
• /
• 2021

Background: The evaluation of skyshine distribution, release of airborne radioactive nuclides, and soil activation and groundwater migration were required for radiological assessment of the impact on the environment surrounding In-Flight (IF)-system facility of the RAON (Rare isotope Accelerator complex for ON-line experiment) accelerator complex. Materials and Methods: Monte Carlo simulation by MCNPX code was used for evaluation of skyshine and activation analysis for air and soil. The concentration model was applied in the estimation of the groundwater migration of radionuclides in soil. Results and Discussion: The skyshine dose rates at 1 km from the facility were evaluated as 1.62 × 10^-3 μSv·hr^-1. The annual releases of ³H and ¹⁴C were calculated as 9.62 × 10^-5 mg and 1.19 × 10^-1 mg, respectively. The concentrations of ³H and ²²Na in drinking water were estimated as 1.22 × 10^-1 Bq·cm^-3 and 8.25 × 10^-3 Bq·cm^-3, respectively. Conclusion: Radiological assessment of environmental impact on the IF-facility of RAON was performed through evaluation of skyshine dose distribution, evaluation of annual emission of long-lived radionuclides in the air and estimation of soil activation and groundwater migration of radionuclides. As a result, much lower exposure than the limit value for the public, 1 mSv·yr^-1, is expected during operation of the IF-facility.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.447-452
• /
• 2020

In this work, α-Fe₂O₃ nanocrystals are synthesized by co-precipitation method and used as adsorbent to remove Cr⁶⁺, Cd²⁺, and Pb²⁺ from wastewater at room temperature. The prepared sample is evaluated by XRD, BET surface area, and FESEM for structural and morphological characteristics. XRD patterns confirm the formation of a pure hematite structure of average particle size of ~ 40 nm, which is further supported by the FESEM images of the nanocrystals. The nanocrystals are found to have BET specific surface area of ~ 39.18 m² g^-1. Adsorption experiments are carried out for the different values of pH of the solutions, contact time, and initial concentration of metal ions. High efficiency Cr⁶⁺, Cd²⁺, and Pb²⁺ removal occur at pH 3, 7, and 5.5, respectively. Equilibrium study reveals that the heavy metal ion adsorption of the α-Fe₂O₃ nanocrystals followed Langmuir and Freundlich isotherm models. The Cr⁶⁺, Cd²⁺, and Pb²⁺ adsorption equilibrium data are best fitted to the Langmuir model. The maximum adsorption capacities of α-Fe₂O₃ nanocrystals related to Cr⁶⁺, Cd²⁺, and Pb²⁺ are found to be 15.15, 11.63, and 20 mg g^-1, respectively. These results clearly suggest that the synthesized α-Fe₂O₃ nanocrystals can be considered as potential nano-adsorbents for future environmental and health related applications.