• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.91-98
• /
• 2009

For maintaining railroad, accumulated passing tonnage is a determinant factor of appropriate rail replacement time. Recently, Seoul Metro's rail maintaining system and technology is being improved from previous years, which increasing a standard of rail replacement. Thus, this brings importance of estimating and managing for accumulated passing tonnage. In case of light weighted train such as subway, current method of calculating accumulated passing tonnage has defaults of misrepresenting accumulated passing tonnage data. Because current method is based on the weight of passengers and train., and operation data. In addition, currently there is no mechanical and electronic system that could represent and support the accurate data between heavy and non-heavy traffic area, and accumulated passing tonnage is calculated inaccurately by estimating average value each line. The current method of calculating accumulated passing tonnage misleads to unpredictable data that represent inappropriate rail replacement period, which leads to under or over analyzed replacement period. If accumulated passing tonnage is over estimated, rail replacement leads to waste of budget. Hence, it is necessary to construct reliable actual measurement system to manage rail's life safely and efficiently, and in this study the accumulated passing tonnage measurement device is installed with using rail pad of optical fiber sensors and its effect is analyzed.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.131-138
• /
• 2019

It is necessary to predict subway induced vibration if a new subway is to be built. To obtain the vibration response reliably, a three-dimensional (3D) FEM model, consisting of the tunnel, the soil, the subway load and the building above, is established in MIDAS GTS NX. For this study, it is a six-story frame structure built above line 3 of Guangzhou metro. The entire modeling process is described in detail, including the simplification of the carriage load and the determination of model parameters. Vibration measurements have been performed on the site of the building and the model is verified with the collected data. The predicted and measured vibration response are used together to assess vibration level due to the subway traffic in the building. The No.1 building can meet work and residence comfort requirement. This study demonstrates the applicability of the numerical train-tunnel-soil-structure model for the serviceability assessment of subway induced vibration and aims to provide practical references for engineering applications.

• 한국콘텐츠학회논문지
• /
• 제17권1호
• /
• pp.50-57
• /
• 2017

본 논문은 대전도시철도 개통 이후 내부자료 통계분석을 통해 열차지연 원인과 문제점을 살펴보고 고위험군의 위험도를 평가하여 위험도 지수 심각도와 위험도를 측정하였다. 측정방법으로는 위험도 관리방법인 risk matrix($5{\times}5$)를 적용하여 위험도 등급을 산정하였으며, 결과에 따른 안전수준과 허용수준 범위를 분석하였다. 그 결과 차량분야가 가장 위험도가 심각하고, 다음으로 기계설비분야가 위험도를 내재하고 있는 것으로 나타났다. 특히 차량의 출입문장치결함으로 인한 출입문고장과 열차신호 및 제어장치는 심각도도 높지만, 빈도수가 매우 잦아 추가적인 사고 잠재성을 보이고 있다. 기계설비 분야의 PSD결함도 PSD의 안전문 개폐불량이 가장 위험한 것으로 나타났으며, PSD의 오취급 및 PSD의 유리파손 등도 위험도를 내포하고 있는 것으로 나타났다. 본 연구는 이러한 위험도를 내재하고 있는 사고의 빈도수를 경감하고, 심각도를 낮춰서 위험도를 예방할 수 있는 방안을 예측하여 미리 선제적으로 대비할 수 있는 분석결과를 제시함으로써 안전한 도시철도운영으로 이용자의 교통편익에 기여할 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.870-873
• /
• 2011

철도 차량에서의 화재 발생 시 피난에서 차량에서 승강장이나 터널 같은 외부 환경은 매우 중요하다. 많은 인원이 탑승하게 되는 지하철과 그 승강장의 영향을 알아보기 위해, SIMULEX, PATHFINDER, STEPS를 시나리오에 적용 비교해 보았다. 대상차량은 서울에서 운행되는 차량을 기준으로 하였으며, 대상 승강장은 [도시철도 정거장 및 환승 편의시설 보완설계지침]을 기준으로 제작한 모델을 적용하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1399-1406
• /
• 2011

As a result of the examination analyzed loop type of Detecting the Broken Rail Monitoring System as a part of prevention of train derailment, installed in the Seoul Metro No. 2 subway line 98.51m section which is Samsung to Seolleung, we found that it is possible to detect crack location(Thermit welding: 48.18m) within the margin of error of ${\pm}1m$ accurately As analysis of the first day, third day, fifty day, and seventh day periodically, we found that Fresnel reflection happened where the crack location 48.18m. However other 3 branches show loss by bending of optical cable(spread reflection from the outside impact).

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.162-169
• /
• 2016

Gyeong-bu railway line in Korea between Seoul and Cheon-an was built as two double tracks. A four-display signaling system, only for the metro line, was installed on the second double track so KTX and conventional trains can only operate on the first double track. This study suggests a method to allow KTX and conventional trains operated on the five-display signaling system to respond to accidents and track defects on the second double-track under the four-display signal system by means of problem analysis, calculation of breaking distances for KTX and conventional trains at each break mode, and improvement of the ATS system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.789-797
• /
• 2004

The wear and defects on the wheel tread are caused by the interface between wheel and rail, the suspension system on bogie, the track condition and etc, which are interacted with complex mechanism. Because of the difficulty of analysis of wheel and rail interaction, the measuring data are necessary for improvement of wheel design and maintenance of train. On this case study, the pattern of wheel wears and defects are presented and lifetime of wheel and the reprofiling period are estimated on a basis of the measured results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2007

To predict the fire and smoke hazards of rail car with a evacuation model is essential for achieving life safety of all passengers in the event of fire. Currently, more than 30 different evacuation models are available and expected increasing demand in high population density areas as a metro train station. This paper includes brief history of evacuation models and review some key factors of design egress scenario, these are pre-movement time, egress route, location of fire, overturned carriage, and configuration of rail car. Applying the egress model for rail passenger car, users need to confirm the model's ability of physiological, psychological responses effecting to pre-movement time of individual or crowd unit, representation of complexity of carriage layout, and evaluation of effects of smoke.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.642-646
• /
• 2008

Signaling system, for which ensuring safe train operation, must be a fail-safe system with higher reliability and safety. TCS has made significant improvements both on signaling system, from relay based ground signaling system to computer based on-board system, and on driving mode, form low speed and low density driving to TCS supporting high speed and high density driving. In addition, TCS has been applied to rolling stock with a wide variety of context according to the characteristics of rolling stock or railway infrastructure. In this paper, therefore, we confirmed the basic concept of ATC system and analyzed its development process in technology context via referencing international cases and ATC systems introduced and applied in Korea. Based on those analyses, we suggested the new TCS development strategy for its suitable application to high speed line, conventional line and metro, and we also provided technical considerations related to TCS application.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.59-65
• /
• 2014

Indoor air quality including metro subway is of recent interests in large cities. Inflow air to the inside of the train and circulating air flow through MVAC of stations contain large amount of iron based fine particles. This paper evaluated the collection of such a dust by magnetic filters as comparing to conventional particle capturing mechanisms such as inertia, direct impaction and diffusion. It was found that filtration velocity, magnetic field intensity, and fiber size were the most important parameters for magnetic filtration. Application of magnetic force obviously enhances the collection efficiency particularly in fine modes smaller than 10 mm. However, its effect was found greater in 2.5 mm than submicron particles.