• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.65-72
• /
• 2002

Recently, stem cell-mediated gene therapy is emerging as a novel therapeutic approach. For the successful gene modification of stem cells, the development of a suitable gene transfer technique needs to be preceded. This review focuses on the various gene transfer techniques based on nonviral and viral vectors, and physical methods. The advantages and disadvantages of each gene transfer method are compared, and the general properties of these vectors are discussed in relation to the gene transfer in stem cell research. This review also highlights the therapeutic application of stem cell-mediated gene therapy. The choice of gene transfer vectors may vary depending on the type of the stem cells and the target of stem cell therapy. Of various gene transfer methods, viral vector-based gene therapy has been emphasized due to the higher transfection efficiency. The current status and up-to-date findings of stem cell-mediated gene therapy are discussed in the viewpoint of the various targets of stem cell therapy such as the modification of stem cell potency, the acceleration of regeneration process and the formation of expressional organization.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.83-89
• /
• 2002

In the present study, heat transfer characteristics of oil flow over offset strip fins were predicted by the numerical methods. Oil flow in the plate-fin passage was idealized by 2 dimensions. The flow patterns and heat transfer characteristics were predicted in details. Numerical results shows that the average convective heat transfer coefficients are almost independent on the raws of fins and affected by fin pitches. At the rear face of fin, there exists minimum point of heat transfer coefficients where stream are separated from the fin surfaces. The convective heat transfer coefficients were effected by separation bubbies which appeared at the wake region of offset strip fins.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.187-195
• /
• 2006

In this work, we introduce a newly constructed arc-jet device of 150 kW input power. The design of this device is a Huels type with a narrow downstream electrode. General features of this device are first described. From the measured values of electrical power input, heat discharged into cooling water, gas flow rate, and settling chamber pressure, average enthalpy was determined using the heat balance and sonic throat methods. Using the settling chamber pressure and average enthalpy values, the flow properties in the nozzle and the heat transfer rate to the stagnation point of a blunt body are calculated accounting for thermochemical nonequilibrium. The envelope of enthalpy, pressure, degree of dissociation, and heat transfer rate are presented. Stagnation temperature is predicted to be between 4630 to 6050 $^{\circ}K$, and the stagnation point heat transfer rate is predicted to be between 175 and 318 W/$cm^{2}$ for a blunt body of 3 mm nose radius. Degree of dissociation in the stagnation region of the blunt body exceeds 30%.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.382-391
• /
• 2021

Unsupervised domain adaptation often gives impressive solutions to handle domain shift of data. Most of current approaches assume that unlabeled target data to train is abundant. This assumption is not always true in practices. To tackle this issue, we propose a general solution to solve the domain gap minimization problem without any target data. Our method consists of two regularization steps. The first step is a pixel regularization by arbitrary style transfer. Recently, some methods bring style transfer algorithms to domain adaptation and domain generalization process. They use style transfer algorithms to remove texture bias in source domain data. We also use style transfer algorithms for removing texture bias, but our method depends on neither domain adaptation nor domain generalization paradigm. The second regularization step is a feature regularization by feature alignment. Adding a feature alignment loss term to the model loss, the model learns domain invariant representation more efficiently. We evaluate our regularization methods from several experiments both on small dataset and large dataset. From the experiments, we show that our model can learn domain invariant representation as much as unsupervised domain adaptation methods.

• 한국식품과학회지
• /
• 제21권6호
• /
• pp.735-741
• /
• 1989

For the accurate prediction of freezing time, probably the most difficult factor to measure and major error source is the surface heat transfer coefficient. In this work, surface heat transfer coefficient were determined for still air freezing and immersion freezing methods by theory of the transient temperature method and confirmed by using a modification of plank's equation to predict the freezing time of ground lean beef. The results showed the cooling rate of immersion freezing was about 11 times faster than that of still air freezing method. A comparison of surface heat transfer coefficient of copper plate and ground lean beef resulted an difference of 25-30% because the food sample surface is not smooth as copper plate. Also, when h-values measured by ground lean beef were applicated to modified model, the accuracy of its results is very high as difference of about 8%.

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.518-524
• /
• 2014

Heavy metal pollution in agricultural field near at the abandoned metal mines has been a critical issue in Korea. In particular, bioaccumulation in plants can have detrimental effect on human health. Main objective of this research was to examine arsenic (As) concentration in soil with varied extraction methods and to determine bioaccumulation and biological transfer factor in different crops. Results showed that bioaccumulation ratio of As for total contents in soil was ordered leafy and stem vegetables (1.19%) > fruit bearing vegetables (0.79%) > pulses (0.40%) > root vegetables (0.36%) with different crop species. Among 6 different extraction methods, all of extraction methods showed high correlation ($R^2=0.87-0.97$) except DTPA ($R^2=0.25$) when comparing As concentration in soil extracted with different extractants and As concentration in each crops. Calculated biological transfer factor was ranged 0.002-0.018 depending on crop species. Overall, concentration of As in crops can be varied and best management practice for minimizing bioaccumulation of As should be considered depending on crop species.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.379-381
• /
• 2002

The major electron transfer cofactors in photosystem II have been studied by pulsed EPR, pulsed electron electron double resonance (PELDOR) and laser excited spin polarized electron spin echo envelope modulation (ESEEM) methods, in non-oriented and oriented photosystem II membranes. Distances between radical pairs were determined trom the observed dipole interaction constants to be 27.3 A for P680-QA, 30 A, etc. with the error within 1 A. Angles between the distance vector and membrane normal was determined by orientation dependence of oriented membranes with the accuracy of 5˚ The results were compared with the recent structural data by X-ray analysis.

• ETRI Journal
• /
• 제39권1호
• /
• pp.76-86
• /
• 2017

In this study, we propose an automatic contrast enhancement method based on transfer function modification (TFM) by histogram equalization. Previous histogram-based global contrast enhancement techniques employ histogram modification, whereas we propose a direct TFM technique that considers the mean brightness of an image during contrast enhancement. The mean point shifting method using a transfer function is proposed to preserve the mean brightness of an image. In addition, the linearization of transfer function technique, which has a histogram flattening effect, is designed to reduce visual artifacts. An attenuation factor is automatically determined using the maximum value of the probability density function in an image to control its rate of contrast. A new quantitative measurement method called sparsity of a histogram is proposed to obtain a better objective comparison relative to previous global contrast enhancement methods. According to our experimental results, we demonstrated the performance of our proposed method based on generalized measures and the newly proposed measurement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1113-1124
• /
• 2009

The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.87-95
• /
• 2017

Enzymatic fuel cells are promising low cost, compact and flexible energy resources. The basis of enzymatic fuel cells is transfer of electron from enzyme to the electrode surface and vice versa. Electron transfer is done either by direct or mediated electron transfer (DET/MET), each one having its own advantages and disadvantages. In this study, the DET and MET of laccase-based biocathodes are compared with each other. The DET of laccase enzyme has been studied using two methods; assemble of needle-like carbon nanotubes (CNTs) on the electrode, and CNTs/Nafion polymer. MET of laccase enzyme also is done by use of ceramic electrode containing, ABTS (2,2'-azino-bis [3-ethylbenzthiazoline-6-sulphonic acid]) /sol-gel. Cyclic voltammetric results of DET showed a pair of well-defined redox peaks at $200{\mu}A$ and $170{\mu}A$ in a solution containing 5and $10{\mu}M$ o-dianisidine as a substrate for needle-like assembled CNTs and CNTs-Nafion composite respectively. In MET method using sol-gel/ABTS, the maximum redox peak was $14{\mu}A$ in the presence of 15 M solution o-dianisidine as substrate. The cyclic voltammetric results showed that laccase immobilization on needle-like assembled CNTs or CNTs-Nafion is more efficient than the sol-gel/ABTS electrode. Therefore, the expressed methods can be used to fabricate biocathode of biofuel cells or laccase based biosensors.