• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.255-257
• /
• 1995

In this paper, a new speed estimation method of induction motors based on the very quick torque control is proposed to realize speed sensorless control. The proposed method can be realized very simply by detecting primary motor current and voltage command at every sampling time. As the method need not the differential value of primary current in a arithmetic of voltage command, it can be expected to promote the precision of speed estimation in low speed area, especially. Through the numerical simulation, the validity of the proposed method was successfully confirmed.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1042-1045
• /
• 2000

Speed control without speed sensor is expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper investigates a novel speed estimation method of I.M considering the secondary resistance identification based on the transientless torque control technique. Especially, this paper aimed at the identification of the secondary resistance simultaneously with speed estimation. For this, the secondary flux with some frequency is controlled independently on torque. The proposed speed estimation method is derived from a motor circuit equation theoretically and also it can be conducted easily by detecting primary motor currents and primary voltage commands at every sampling time. Some numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter and experimental results are performed to verify the proposed method.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2016

Dead time is typically incorporated in voltage source inverter systems to prevent short circuit cases. However, dead time causes an error between the output voltage and reference voltage. Hence, voltage equation-based algorithms, such as motor parameter estimation and back electromotive force (EMF)-based sensorless algorithms, are prone to estimation errors. Several dead-time compensation methods have been developed to reduce output voltage errors. However, voltage errors are still common in zero current crossing areas, and an effect of the error is much worse in a low speed region. Therefore, employing voltage equation-based algorithms in low speed regions is difficult. This study analyzes the conventional dead-time compensation method and output voltage errors in low speed operation areas. A current shaping method that can reduce output voltage errors is also proposed. Experimental results prove that the proposed method reduces voltage errors and improves the accuracy of the parameter estimation method and the performance of the back EMF-based sensorless algorithm.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.381-388
• /
• 2018

This study proposes marine traffic volume estimation method considering ship speed, a factor excluded from the existing method. Ten days of GICOMS marine traffic data from Pyeongtaek and Dangjin ports was applied to this study. As a result, converted traffic volume with the proposed estimation method showed an increase of 4.41 (${\pm}0.99$) times or decrease of 0.59 (${\pm}0.04$) at most, compared with the existing estimation method. Average marine traffic congestion for each time applying the proposed estimation method showed an increase of 1.43 (${\pm}0.10$) compared with the existing estimation method. The maximum marine traffic congestion for each time was 1.62 (${\pm}0.34$) times higher compared with the existing estimation method. Marine traffic peak time, defined as the highest point of marine traffic congestion, was evaluated to be different from that of the existing method because of distribution of vessel speed. In conclusion, considering ship speed is necessary when estimating marine traffic volume to produce a practical estimate of marine traffic capacity.

• Journal of Fisheries and Marine Sciences Education
• /
• v.7 no.1
• /
• pp.127-132
• /
• 1995

In this paper, a new speed estimation method of induction motors based on the very quick torque control is proposed to realize speed sensorless control. The proposed method can be realized very simply by detecting primary motor current and voltage command at every sampling time. As the method need not the differential value of primary current in a arithmetic of voltage command, it can be expected to promote the precision of speed estimation in low speed area, especially. Through the numerical simulation, the validity of the proposed method was successfully confirmed.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.149-160
• /
• 2017

To improve the performance of sensorless induction motor (IM) drives, an adaptive speed estimation method based on a strong tracking extended Kalman filter with a least-square algorithm (LS-STEKF) for induction motors is proposed in this paper. With this method, a fading factor is introduced into the covariance matrix of the predicted state, which forces the innovation sequence orthogonal to each other and tunes the gain matrix online. In addition, the estimation error is adjusted adaptively and the mutational state is tracked fast. Simultaneously, the fading factor can be continuously self-tuned with the least-square algorithm according to the innovation sequence. The application of the least-square algorithm guarantees that the information in the innovation sequence is extracted as much as possible and as quickly as possible. Therefore, the proposed method improves the model adaptability in terms of actual systems and environmental variations, and reduces the speed estimation error. The correctness and the effectiveness of the proposed method are verified by experimental results.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1123-1133
• /
• 2012

This study configuration Vector Control System which is stable and has outstanding Dynamic Characteristics in Very Low Speed Region and Low Speed Region, and proposes Instantaneous Speed Observer and Very Low Speed Control method and vector control system of the speed estimation a using Reduced-Dimensional State Observer. The Observer proposed in this system, by appling Reduced-Dimensional State Observer to Load-Torque estimation and using for speed estimation, implements system composition simply and is capable of accurate Instantaneous Speed estimation in Very Low Speed Region. Also, this study reduces influence by System Noise and suggests an induction motor speed control system which is effective in Load Disturbance, modeling error, estimation noise and so on without changing pole of an Observer.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.289-292
• /
• 2001

This paper investigates a RBF equalizer (RBFE) reducing a center Estimating Speed. One of method for RBF center estimation is using k-means clustering. The performance of RBFE is depends on the estimation ability of the RBF center. We Propose a RBF Equalizer using modified k-means clustering algorithm (MKMC) to speed up channel estimation and to reduce complexity of calculation. Computer simulations are included to illustrate the analytical results. It is shown that a discussed method improves about 1 dB via less training data.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1138-1141
• /
• 2003

This paper proposes a new speed and flux estimation method which has the robustness against the variation of the electrical parameters of the motor and the superiority in the dynamic characteristics compared with the conventional sensorless schemes. In the proposed method, the stator currents and the rotor fluxes are observed on the stationary reference frame using the sliding mode concept. And the rotor speed is estimated using the current estimation errors and the observed rotor fluxes based on the Lyapunov stability theory. Also a design method of the observer gain is proposed to minimize the effect of the speed estimation error on the rotor flux observation. The experimental results verified that the proposed method shows more robust and improved performances than the previous estimation method under the variations of motor resistance and inductance.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.235-244
• /
• 2006

Recently, speed sensorless vector control for synchronous reluctance motors (SYRMs) has deserved attention because of its advantages. Although rotor angle calculation using flux estimation is a straightforward approach, the DC offset can cause an increasing pure integrator error in this estimator. In addition, this method is affected by parameter fluctuation. In this paper, to control the motor at the low speed region, a modified programmable cascaded low pass filter (MPCPLF) with sensorless online parameter identification based on a block pulse function is proposed. The use of the MPCLPF is suggested because in programmable, cascade low pass filters (PCLPF), which previously have been applied to induction motors, the drift increases vastly wl)en motor speed decreases. Parameter identification is also used because it does not depend on estimation accuracy and can solve parameter fluctuation effects. Thus, sensorless speed control in the low speed region is possible. The experimental system includes a PC-based control with real time Linux and an ALTERA Complex Programmable Logic Device (CPLD), to acquire data from sensors and to send commands to the system. The experimental results show the proposed method performs well, speed and angle estimation are correct. Also, parameter identification and sensorless vector control are achieved at low speed, as well as, as at high speed.