• 제목/요약/키워드: Method of Characteristics

검색결과 36,482건 처리시간 0.056초

Characteristics Analysis of Single Phase Induction Motor via Equivalent Circuit Method and Considering Saturation Factor

  • Cho, Su-Yeon;Kim, Won-Ho;Jin, Chang-Sung;Kang, Dong-Woo;Lee, Ju
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권1호
    • /
    • pp.178-183
    • /
    • 2014
  • This paper presents a motor characteristics analysis method using an equivalent circuit. Motor characteristics analysis via equivalent circuit is very important for designing a high efficiency single phase induction motor. The accuracy of the motor characteristics depends on the accuracy of the parameters, especially saturation factor, which determines the cyclical relationship in the analysis process. Therefore, using the proposed method, the saturation factor was calculated using the iteration routine and numerical technique. The proposed method was verified by comparing the finite element method results and the dynamo test results of manufactured prototype model.

Simultaneous Optimization for Robust Parameter Design Using Signal-to-Noise Ratio

  • Kwon, Yong Man
    • 통합자연과학논문집
    • /
    • 제13권3호
    • /
    • pp.92-96
    • /
    • 2020
  • Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

점탄성재료의 동적 특성 측정에 관한 연구 (A Study on the Dynamic Test of Viscoelastic Material)

  • 최현;박건록;김두훈;이상조
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
    • /
    • pp.35-41
    • /
    • 1997
  • Viscoelastic materials shows the characteristics of elasticity and viscosity. Unlike metals which show negligible damping value, the damping characteristics of viscoelastic materials like rubber mounts is very important in the analysis of the dynamic system. So there has been a great interest in measuring the damping characteristics of viscoelastic materials. There are two kinds of methods which the damping characteristics can be measured. One is the resonant method where loss factor can be measured only in the resonant frequency. The other is the nonresonant method which is characterized by the impedance method are introduced. The impedance test results, the loss factor by the impedance method are compared to the results of the resonant method and recommendations in the experimental setup are suggested.

  • PDF

섭동법을 이용한 30% U 형 공기윤활 슬라이더 베어링의 동특성 해석 (An Analysis of Dynamic Characteristics of 3o% U Slider-Air Bearings by Using Perturbation Method)

  • 강태식;정태건;최동훈
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제29회 춘계학술대회
    • /
    • pp.291-296
    • /
    • 1999
  • This study presents a method for determining stiffness and damping coefficients of 30% U slider-air bearings by using perturbation method, and shows that this method is more accurate than steady state method according to the comparison of those with the modal analysis method. Through a generalized lubrication equation, which based on linealized Boltzmann equation, the static and dynamic pressure distributions are calculated by finite volume method.

  • PDF

Analysis on natural vibration characteristics of steel-concrete composite truss beam

  • Jiang, Lizhong;Feng, Yulin;Zhou, Wangbao;He, Binbin
    • Steel and Composite Structures
    • /
    • 제26권1호
    • /
    • pp.79-87
    • /
    • 2018
  • In order to study the natural vibration characteristics of steel-concrete composite truss beam (SCCTB), the influence of multiple factors such as interface slip, shear deformation and moment of inertia are considered. Afterwards, based on the Hamilton principle the vibration control differential equation and natural boundary conditions of SCCTB are deduced. By solving SCCTB differential equations of vibration control, an analytical calculation method is proposed for analyzing the natural vibration characteristics of SCCTB. The natural frequencies of SCCTBs with different degrees of shear connection and effective lengths are calculated by using the analytical method, and the results are compared against those obtained from ANSYS finite element numerical calculation method. The results show that the analytical method considering the influence factors such as interface slip, shear deformation and moment of inertia are in good agreement with those obtained from ANSYS finite element numerical calculation method. This evidences the correctness of the analytical method and show that the method proposed exhibits improvement over the previously developed theories for the natural vibration characteristics of SCCTB. Finally, based on the analytical method, the influence factors of SCCTB natural vibration characteristics are analyzed. The results indicate that the influence of interface slip stiffness on SCCTB's natural frequency is more than 10% and therefore cannot be neglected. Moreover, shear deformation has an effect of more than 35% on SCCTB's natural frequency and the effect cannot be ignored either in this case too.

점탄성 재료의 동적 특성 측정에 관한 연구 (A Study on the Dynamic Test of Viscoelastic Material)

  • 최현;박건록;김두훈;이상조
    • 소음진동
    • /
    • 제7권6호
    • /
    • pp.937-943
    • /
    • 1997
  • Viscoelastic materials have the characteristics of elasticity and viscosity. Unlike the metals which show negligible damping characteristics, the damping characteristic of viscoelastic materials like rubber mounts is very important in the analysis of the dynamic system. So there has been a great interest in measuring the damping characteristics of the material can be measured. One is the resonant method which loss factor can be measured only in the resonant frequency. The other is the nonresonant method. In this paper, the test procedure and the physical meaning of the impedance method are introduced. The impedance test results, the loss factor by the impedance method, are compared to the results of the resonant method including some recommendations in the experimental setup.

  • PDF

경관생태적 측면에서의 도시 에코톱의 분류방법 및 특성분석 - 대구광역시를 사례지로 - (The Analysis of Classification Method and Characteristics of Urban Ecotopes on the Landscape Ecological Aspect - The Case of Metropolitan Daegu -)

  • 나정화;이정민
    • 한국환경과학회지
    • /
    • 제12권12호
    • /
    • pp.1215-1225
    • /
    • 2003
  • The purpose of this research was to investigate the characteristics of urban ecotopes and to classify ecotopes systematically from them. Total of 15 characteristics for classification of ecotopes were selected, and there were categorized 3 factors, that is abiotic, biotic and anthropological factors. The ecotope types in the study area were classified into 67. The classification of ecotope was made with SPSS for Windows Version 10.0 on the basis of the 15 characteristics. As the results of cluster analysis using the average linkage method between groups, groups of ecotope type were divided into 15 clusters. It was known that there was not a great difference in an affinity as the result of overlapping the maps of ecotope type and land use type. This research suggested characteristics for classification of ecotopes, but there was a limit to Set the objective method for grade classification because of lacking in the basic data, the research of characteristics will be accomplished continuously.

다해상도 시간영역법의 수치적 분산특성과 안정조건 (Numerical Dispersive Characteristics and Stability Condition of the Multi-Resolution Time Domain(MRTD) Method)

  • 홍익표;유태훈;윤영중;박한규
    • 한국전자파학회논문지
    • /
    • 제7권4호
    • /
    • pp.328-335
    • /
    • 1996
  • The numerical dispersive characteristics and the numerical stability confition of the Multi-Resolution Time-Domain(MRTD) method are calculated. A dispersion analysis of the MRTD schemes including a comparison to Yee's Finite-Difference Time-Domain(FDTD) method is given. The superiority of the MRTD method to the spatial discretization is shown. The required computational memory can be reduced by using the MRTD method. We expect that the MRTD method will be very useful method for numerical modelling of electromagnetics.

  • PDF

Thyristor 직류 Chopper방식으로 구동되는 직류타여자식 전동기의 과도특성해석법 (Transient Characteristics of Separately Excited d-c Motor Driven by Thyristor d-c Chopper)

  • 천희영
    • 전기의세계
    • /
    • 제21권2호
    • /
    • pp.9-19
    • /
    • 1972
  • The transient characteristics of separately excited d-c motor driven by thyristor d-c chopper is studied in this paper. The armature controlled system is applied. As a result of theoretrical analysis the following conculsions were drawn: (1) For the transient analysis, it is recognized that the state transition analysis is a more general method and powerful tool than the state equation method or signal flow graph method, although it includes iterative matrix calculations. And the system is dealt with a finite width sampled-data system in the state transition analysis. (2) The transient characteristics of the motor angular velocity and its torque to the sampling duration variation are compared with those due to the amplitude variation of d-c chopper voltage as follows. The attenuation rate of the transient characteristics is equal in both cases, but the initial value of the transient characteristics in former case is greater than in latter case. (3) The roots of characteristics equation of the system lie inside the unit circle of the Z-plane. Therefor the system is stable. Further it is found that as the sampling duration is decreased the relative stability is lessened.

  • PDF

다수 성능특성치의 허용차설계 (Tolerance Design for Multiple Performance Characteristics)

  • 변재현
    • 대한산업공학회지
    • /
    • 제20권4호
    • /
    • pp.99-111
    • /
    • 1994
  • Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

  • PDF