• 한국연소학회지
• /
• 제5권2호
• /
• pp.19-27
• /
• 2000

A turbulent combustion model, based on edge flame dynamics, is discussed in order to predict global extinction of turbulent flames. The model is applicable to the broken flamelet regime of turbulent combustion, in which global extinction of turbulent flame is achieved by gradual expansion of flame holes. The edge flame dynamics is the key mechanism to describe the flame hole expansion or contraction. For flames with Lewis numbers near unity, there is a $Damk{\ddot{o}}hler$ number, namely the crossover $Damk{\ddot{o}}hler$ number, at which edge flame changes its direction of propagation. The parametric region between the quasi-steady extinction condition and the edge-flame crossover condition is a metastable region, in that flames without edge can stay in their burning states while flames with edge have to retract to expand quenching holes. Using the above properties of edge flame, Hartley and Dold proposed a Lagrangian hole dynamics, which allows us to simulate transient variation of quenching holes. In their model, each stoichiometric surface is subjected to a random sequence of scalar dissipation rate compatible to the equilibrium turbulence. Then, each stoichiometric surface will evolve, according to the combustion map, dependent on the scalar dissipation rate and existence of flame edge, If all the burning surfaces are annihilated, the event can be declared as a global extinction. The consequence obtained from the above model also can be used as a subgrid model to determine local extinction occurring in a calculation grid.

• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.57-64
• /
• 2003

Poly(ethylene-co-vinyl acetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluent used was toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by SEM observation and particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, and the cooling rate of EVA copolymer solution was lower.

• 한국염색가공학회지
• /
• 제17권4호
• /
• pp.15-20
• /
• 2005

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by thermally induced phase separation in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the polymer or pigment weight percentage and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the pigment concentration and the cooling rate of EVA copolymer solution were lower.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.386-392
• /
• 2011

We are crystallized to the linear low density polyethylene(LLDPE) particles by a thermally induced phase separation(TIPS). TIPS process based on the phase separation mechanism was performed for the LLDPE system which undergoes liquid-solid phase separation. The linear low density polyethylene particle formation occurred by the nucleation and growth mechanism in the metastable region. Although the growth rates depended on the experimental conditions such as the polymer concentration and temperature, the particles were larger when the polymer concentration was higher or temperature was higher. The particles were observed by SEM. The LLDPE particle size distribution became broader when the polymer concentration was higher.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.870-875
• /
• 2005

We measured the optogalvanic signal and discharge voltage-current(V-I) curve under the two different discharge conditions with different buffer gases, Ar, and Ne. When the Gd was used as a cathode material at low discharge current less than 10mA, a significant change was observed in the current-voltage curve. Time resolved optogalvanic signal measurement were measured by the diode laser of which wavelengths correspond to metastable transition line of these gases (Ar, Ne). From these measurements, we found that the characteristics of the V-I curve strongly depend on the Penning ionization process.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.243-252
• /
• 2019

The pitting corrosion and inhibition studies of AZ31B magnesium alloy were investigated in the alkaline solution (pH12) with chloride and inhibitors. The corrosion behavior of passive film with/without Cl^- in the alkaline electrolyte were conducted by polarization curve and immersion tests in the presence of various additives (inhibitors) to clarify the inhibition efficiency of pitting corrosion at higher potential region. Critical concentration of pitting corrosion for Mg alloy was evaluated with 0.005 M NaCl in 0.01 M NaOH on the anodic polarization behavior. Critical pitting of AZ31B Mg alloy in 0.01 M NaOH is a function of chlorides; E_pit = - 1.36 - 0.2 log [Cl^-]. When the Sodium Benzoate (SB) was only used as an inhibitor, a few metastable pits developed on the Mg surface by an immersion test despite no pitting corrosion on the polarization curve meaning that adsorption of SB on the surface is insufficient protection from pitting corrosion in the presence of chloride. The role of SB and Sodium Dodecylbenzenesulfonate (SDBS) inhibitors for the Mg alloy surface in the presence of chloride was suppressed from pitting corrosion to co-adsorb on the Mg alloy surface with strong formation of passive film preventing pitting corrosion.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.83-88
• /
• 2003

Nanocrystalline materials of Ni and Ni-Cu alloy have been synthesized by the pulsed wire evaporation (PWE) method and these abnormal magnetic properties in the magnetic ordered state have been characterized using both VSM and SQUID in the range of high and low magnetic fields. Ni and Ni-Cu particles with an average size of 20 to 80 nm were found to influence magnetic hysterisis behavior and the results of powder neutron diffraction patterns and saturation magnetization curves are shown to indicate the absence of the NiO phase. The shifted hysterisis loop and irreversibility of the magnetization curve in the high field region were observed in the magnetic-ordered state of both Ni and Ni-Cu. The virgin magnetization curve for Ni slightly spillover on the limited hysterisis loop ($\pm$20kOe). This irreversibility in the high field of 50 kOe can be explained by non-col-linear behavior and the existence of the metastable states of the magnetization at the surface layer (or core) of the particle in the applied magnetic field. Immiscible alloy of Cu-Ni was also found to show irreversibility having two different magnetic phases.

• 한국의류산업학회지
• /
• 제10권2호
• /
• pp.254-259
• /
• 2008

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluents used were toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size, which was obtained by SEM observation and particle size analyzer, became decreased when the titanium dioxide($TiO_2$) concentration was higher. The deodorizing function of the prepared fabrics was studied by the determination of the decomposing capability for $NH_3$. The deodorant activity of these deodorizing fabrics was measured by chromogenic gas detector tubes. The deodorant activity of $NH_3$ increased with increasing $TiO_2$ concentration of EVA microsphere.

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.371-376
• /
• 2008

Poly(ethylene-co-vinylacetate) (EVA) microspheres were prepared by thermally induced phase separation (TIPS) in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the concentration and component of the polymer and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, the cooling rate of EVA copolymer solution were lower. The content of disperse dye in EVA microsphere was obtained by TGA thermal analysis, the dye content of EVA15 and EVA18 were 3.5 and 2.0 wt% respectively.

• Bulletin of the Korean Chemical Society
• /
• 제17권12호
• /
• pp.1127-1131
• /
• 1996

[FeⅡ2(N-Et-HPTB)Cl2]BPh4(1), where N-Et-HPTB is the anion of N,N,N',N'-tetrakis(N-ethyl-2-benzimidazolylmethyl)-2-hydroxy-l,3-diaminopropane, has been synthesized to model dioxygen binding to the diferrous centers of proteins. 1 has a singly bridged structure with a μ-alkoxo of N-Et-HPTB and contains two five-coordinate iron(Ⅱ) centers with two chloride ligands as exogenous ligands. 1 exhibits an electronic spectrum with a λmax at 336 nm in acetone. 1 in acetone exhibits no EPR signal at 4 K, indicating diiron(Ⅱ) centers are antiferromagnetically coupled. Exposure of acetone solution of 1 to O2 at -90 ℃ affords an intense blue color intermediate showing a broad band at 586 nm. This absorption maximum of the dioxygen adduct(1/O2) was found in the same region of μ-l,2-peroxo diiron(Ⅲ) intermediates in the related complexes with pendant pyridine or benzimidazole ligand systems. However, this blue intermediate exhibits EPR signals at g = 1.93, 1.76, and 1.59 at 4 K. These g values are characteristic of S = 1/2 system derived from an antiferromagnetically coupled high-spin Fe(Ⅱ)Fe(Ⅲ) units. 1 is the unique example of a (μ-alkoxo)diferrous complex which can bind dioxygen and form a metastable mixed-valence intermediate. At ambient temperature, most of 1/O2 intermediate decays to form a diamagnetic species. It suggests that the dacay reaction of the intermediate might be bimolecular, implying the formation of mixed-valence tetranuclear species in transition state.