• Economic and Environmental Geology
• /
• v.35 no.6
• /
• pp.533-544
• /
• 2002

In order to investigate the relative mobility (RM) of dissolved elements during processes controlling major and trace element content, the concentrations of major, minor and trace elements were reviewed from the previous data of $CO_2$-rich waters and granites from Kangwon Province. The relative mobility of elements dissolved in $CO_2$-rich waters is calculated from $CO_2$-rich water/granite ratio with normalizing by sodium. The results show that gaseous input of magmatic volatile metals into the aquifer is negligible in this study area, being limited by cooling of the rising fluids. Granite leaching by weakly acidic, $CO_2$-charged water is the overwhelming source of metals. Poorly mobile element (Al) is preferentially retained in the solid residue of weathering, while alkalis, alkaline earth and oxo-hydroxo anion forming elements (especially As and U) are mobile and released to the aqueous system. Transition metals display an intermediate behavior and are strongly dependent on either the redox conditions (Fe and Mn) or solid surface-related processes (adsorption or precipitation) (V, Zn and Cu).

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.169-178
• /
• 2016

The Standards, Measurement and Testing Programme (SM&T-formerly BCR) extraction procedure was applied to fractionate Cr, Cu, Ni, Pb and Zn in 23 top soil samples into: (i) exchangeable phase; (ii) reducible phase; (iii) oxidisable(sulfides and organics bound) phase; and (iv) residual phase. Fractions of Cr and Ni were in the order of residual > oxidisable > reducible > exchangeable phase. The oxidisable phase was identified as dominant for Cu and Pb. Zn had the highest ratio of exchangeable phase in comparision to the other metals. The bioavailability and mobility were assessed to be the greatest for Zn, followed by a decreasing order of Pb, Cu, Ni and Cr. All metal average concentrations in topsoil samples was higher in industrial sites than in agricultural sites. Our results revealed higher concentrations in topsoil samples (0~15 cm) than in sub soils (15~30 cm, 30~60 cm) for most metals at six sites (No. 5, 6, 17, 19, 20, 23). The fractions of exchangeable, reducible ad oxidisable phases showed relatively high correlation with soil pH, Fe/Mn oxide concentrations and organic matter contents, respectively.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.83-90
• /
• 2016

The aim of the present study was to evaluate the degree of metal contamination of the Turag River water and its suitability for irrigation. Twenty water samples were analyzed for physicochemical parameters and metals viz., calcium, magnesium, potassium (K), sodium, copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), lead (Pb), cadmium (Cd), chromium (Cr), and nickel (Ni). All water samples were slightly alkaline to alkaline. Regarding electrical conductivity (EC), all samples were suitable for crop in soils with moderate permeability and leaching. Water samples were medium salinity and low alkalinity hazard classes. In terms of total dissolved solids (TDS), all samples were classified as freshwater. As per sodium adsorption ratio (SAR) and soluble sodium percentage (SSP), all samples were classified as excellent. No residual sodium carbonate (RSC) was detected in any of the samples, indicating suitability for irrigation; and all samples were considered very hard. Cr and Mn contents in all samples were above FAO guideline values and, therefore, these metals were considered toxic. Zn, Cu, Pb, Cd, and Ni concentrations were below acceptable limit for irrigation and do not pose a threat to soil environment. Significant relationships were found between EC and TDS, SAR and SSP, SAR and RSC, and SSP and RSC. The combinations of ions such as K-Zn, K-Fe, K-Cu, K-Mn, K-Pb, Zn-Fe, Zn-Cu, Zn-Mn, Fe-Mn, Cu-Mn, Cu-Pb and Mn-Pb exhibited significant correlation. This study revealed that Turag River water samples are contaminated with Cr and Mn. This fact should not be ignored because water contamination by metals may pose a threat to human health through food chain.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.136-142
• /
• 2012

Various factors affecting on the bioassay were investigated. Experiments with a low mixture ratio (cell to toxicant solution) of 0.5 : 9.5 (v/v) produced observable bioluminescence intensity for assay. Both sodium lactate and potassium nitrate stimulate bioluminescence activity; 2.6~4.0 times of control. Distilled water and MSM, which gave non significant effects on the bioluminescence activity, were determined as proper diluent or extract solutions. A wide range of toxic responses of metals and organics were observed. In general, organics were much less sensitive than metals. Samples collected from eleven sites showed the bioluminescence activity ranging from 29 to 111% of the control. Significant correlation between toxicity and total metal contents was not observed, but the toxicity of two groups, sorted based on the contaminated arsenic concentration in soils, was 44% and 20%, showing considerable differences.

• Journal of Korean Medicine for Obesity Research
• /
• v.7 no.2
• /
• pp.61-75
• /
• 2007

Objectives : The purpose of this study was to investigate correlation between obese degree, result of hair tissue mineral analysis and bony maturation. And we also wanted to compare the differences between early bony maturation group(EBM) and late bony maturation group(LBM). Methods : 146 subjects who visited growth clinic were measured by BMI, PBF(percent body fat), percent BMI, bone age esimation and HTMA(hair tissue mineral analysis). The patients were classified into two groups - EBM, LBM group - according to the gap of bone age and chronological age. It was analysed that the correlation of bony maturation and obese degree, nutritional elements, heavy metals, significant ratio of nutritional elements. Also, analysed the differences between groups. Results : 1. BMI, percent BMI had a correlation with bony maturation, PBF however didn't have a correlation with it. 2. Ca, Mg, Zn and P had a positive correlation with bony maturation, and also K, Cr and Mo had a negative correlation. 3. U, As and Cd had a negative correlation with bony maturation. 4. Ca/P, Na/K, Ca/K and Zn/Cu had a positive correlation with bony maturation, and also Na/Mg, Ca/Mg had a negative correlation. 5. Percent BMI, Ca, Mg, Mn and Ca/p were higher in EBM group. 6. K, Mo and Hg were lower in EBM group. Conclusion : According to this study it could be suggested that maintaining proper percent BMI and accumulation of nutritional elements, heavy metals to prevent early bony maturation.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2017

Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of $D_{50}$ size and sphere type were prepared by gas atomization process. To obtain the soft magnetic powder of a high aspect ratio, in the first, we conducted the ball milling process for 8 hours. And heat treatment was performed under $650^{\circ}C$, 2 hours and $N_2$ atmosphere condition for reducing the residual stress of the powder. Based on these process, we made around $50{\mu}m$ diameter Fe-9.8Si-6.0Al powder, which morphology and shape was a similar to the commercial Fe-Si-Al powder. Finally, the soft magnetic sheets were prepared by tape casting process using by those powders. The permeability of the tape casting sheet was measured, and we confirmed the possibility of reusing to the soft magnetic materials of Fe-Si electric sheet scrap.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.27-33
• /
• 2014

This paper presents a brief summary on a relatively new plasma aided electrolytic surface treatment process for light metals. A brief discussion regarding the advantages, principle, process parameters and applications of this process is discussed. The process owes its origin to Sluginov who discovered an arc discharge phenomenon in electrolysis in 1880. A similar process was studied and developed by Markov and coworkers in 1970s who successfully deposited an oxide film on aluminium. Several investigation thereafter lead to the establishment of suitable process parameters for deposition of a crystalline oxide film of more than $100{\mu}m$ thickness on the surface of light metals such as aluminium, titanium and magnesium. This process nowadays goes by several names such as plasma electrolytic oxidation (PEO), micro-arc oxidation (MOA), anodic spark deposition (ASD) etc. Several startups and surface treatment companies have taken up the process and deployed it successfully in a range of products, from military grade rifles to common off road sprockets. However, there are certain limitations to this technology such as the formation of an outer porous oxide layer, especially in case of magnesium which displays a Piling Bedworth ratio of less than one and thus an inherent non protective oxide. This can be treated further but adds to the cost of the process. Overall, it can be said the PEO process offers a better solution than the conventional coating processes. It offers advantages considering the fact that he electrolyte used in PEO process is environmental friendly and the temperature control is not as strict as in case of other surface treatment processes.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.53-60
• /
• 1997

A series of batch and lab-scale pilot tests were conducted to optimize the design parameters for the application of soil washing techniques to the soil contaminated by heavy metals. Cu, Pb, and Zn were selected as target heavy metals. The concentrations of Cu, Pb, and Zn were 500mg/kg dry soil, 1, 000mg/kg dry soil, and 500mg/kg dry soil, respectively. Citric acid and oxalic acid were used for the extractants. In the batch tests, the extraction efficiencies for Cu, Pb, and Zn were 79%, 72%, 72%, respectively. The proper extractant concentration and dilution ratio(weight/volume) for Cu and Pb were turned to be citric acid 50mM and 1:5, respectively. The extraction efficiencies were enhanced with the addition of 1~2% OA-5 or SDS. From pilot scale tests for Pb, first stage and second stage of soil washing resulted in the extraction efficiency of 59% and 78%, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.155-163
• /
• 2014

BACKGROUND: Recent studies for heavy metal stabilization in soil were mainly focused on finding out new materials and its efficiency. But, such a stabilization method can cause disturbance to soil, leading improper environment for agriculture. The object of this study was to demonstrate the effect of the incorporation of green manure crops on heavy metal-contaminated soil. METHODS AND RESULTS: Soil contaminated with heavy metals was collected from the agricultural soils affected by the abandoned mine. Lime stone was selected and treated to contaminated soil. Three kinds of legume green manure crops; Alfalfa (Medicago sativa), Hairy vetch (Vicia villosa), Red clover (Trifolium pratense) were subsequently cultivated in greenhouse condition. It was found that lime stone increased soil pH and decreased the amount of heavy metal absorption by green manure. The application of green manure residues on soil increased soil pH and inorganic nitrogen. CONCLUSION: The C/N ratio of three green manures was low, indicating fast decomposition rate, resulting in nitrogen supplement, consequently. Considering the point that the soil was used for agricultural purpose, it was recommended that hairy vetch and red clover were preferred. Nevertheless, the heavy metal availability was also increased. Thus, it seemed that further study was needed to confirm that how long maintain a phenomenon.

• Journal of Environmental Impact Assessment
• /
• v.5 no.2
• /
• pp.21-31
• /
• 1996

To assess the impact resulted from the slag dumping, we studied that the changes in the concentration of heavy metal were researched through the statistic analysis at 4 stations in Yongil bay, Korea from 1988 to 1995. And in order to clarify resulting from the changes in heavy metal concentration due to be leaked out from dumped slag, it was fulfilled experiments of the slag extraction. In the extracting experiment, Pb and As were only leaked out from slag aged during 10 days but all of heavy metals were not from it aged during 90 or 180 days. It was found that the concentrations of heavy metals in sea water of vincinity of slag dumping area were still remained in similar, comparing with it of control site(site 4) when they were by analysed statistic method, anova test and Mann-Whitney test. The slag recycling ratio of our country is lower than foreign country. While we need to apply a new process for phosphate treatment, foreign country already apply a slag to phosphorous removal. We suggest that slag dumping cannot putatively affected the changes in the concentration of heavy metal. And we thought that impact of heavy metal induced by slag dumping was not severe. So, it is necessary to utilize this process in phosphorous removal, like a foreign country.