국제해사기구에서는 선박 배기가스 내 질소산화물($NO_x$) 배출에 대한 강화된 Tier III 규제가 2016년부터 적용됨에 따라 이를 대응하기 위한 노력이 필요하다. $NO_x$ 저감 방법으로 선택적 촉매 환원법(Selective catalytic reduction, SCR)을 주로 사용하고 있으며, 세라믹 허니컴 촉매를 주로 사용하고 있다. 그러나 기존의 세라믹 허니컴 촉매는 약한 강도로 인하여 운전상 문제가 발생하거나 유지 및 보수에 있어서도 어려움을 갖는 단점을 가지고 있다. 본 연구에서는 세라믹 허니컴 촉매의 단점들을 보완하기 위하여 높은 열적 안정성과 기계적 강도를 가짐과 동시에 배기가스의 다방향성 이동을 통한 낮은 배압효과 등의 장점을 가지는 금속 지지체를 적용하였다. 이러한 금속 지지체 상에 촉매를 담지하기 위하여 유 무기바인더 첨가를 통해 코팅슬러리를 제조하고, 이를 코팅, 건조 및 소성과정을 통해 금속 지지체 상에 견고하게 부착된 금속 지지체 기반 촉매를 제조하였다. 이러한 금속 지지체 기반 촉매는 $NO_x$ 성능평가와 초음파 및 낙하시험을 통한 접착 내구성 평가를 수행하였다. 특히, 무기바인더를 첨가한 MFC01경우 95% 이상의 $NO_x$ 전환율을 보였으며, 상용 세라믹 허니컴 촉매보다도 우수한 내구성을 보였다. 이러한 특성 및 성능평가를 통하여 개발된 금속 지지체 기반 촉매는 고효율, 고내구성을 가짐을 확인하였으며, 기존 세라믹 허니컴 촉매를 대체할 수 있는 선박용 배연탈질 촉매로서의 가능성을 확인하였다.
본 논문에서는 내부 전자파원에 의해 여기된 공동의 내벽 한 면에 손실 유전체를 설치한 경우 공동 내부로 공급된 전력과 반사계수를 계산하였으며, 손실 유전체에 의해 공동 내부의 전자계가 저감되는 특성을 검토하고있다. 이론 해석으로는 내부 전자파원의 전류 분포 및 손실 유전체 경계면에서의 전계분포에 관한 연립 적분방정식을 유도하고 Galerkin의 모멘트법으로 해석하여 공동체 공급된 전력과 반사계수를 구하고 있다. 이론해석 결과, carbon을 함유한 발포 폴리스티렌을 손실 유전체로 사용하여 유전체의 두께와 carbon 함유량을 조절함으로써 공동 내부 전자파원으로부터의 전자파 방사를 저감시킬 수 있음을 보이고 있으며, 공급 전력의 실험치와도 비교하여 이론 해석의 타당성을 확인하고 있다.
Information presented in this study is intended to inform candidates as they prepare to design and structure the floatovoltaics solar power system. A developed floatovoltaics solar power generation results from the combination of PV plant technology and PV floating technology. This floating-based PV system is a new concept for PV development. The PV floating technology opens new opportunities to give value to unused areas so far while preserving valuable land for more adapted activities. Therefore the land-use conflicts are avoided and the environmental impact is minimized. Therefore the technology offers an interesting opportunity to regions facing on drought during summer time without any negative impact to the eco-system. This study describe the basic components of a floatovoltaics solar power system. A typical system consist of floating system and solar modules, a control device, rechargeable batteries, a load or device and the associated electrical connections. The floating system is specifically designed to keep all metallic components above water leaving only 100% recyclable, closed cell foam filled HDPE plastic floats in contact with the water. As the first case that can maximize the power generation efficiency of PV internationally, it is expected that this study will be utilized as a primary guide for future development of floating type PV system.
The Precast Concrete(PC) method was developed for a large production of a structure in Europe. Afterwards, this PC method has been applied to a structure and an outside Coating of buildings extensively. The outside Coating of the building applied this PC method is a method to put tiles or stones to base concrete. And there is a method to use paints for, so the expression of various patterns is possible. The Multi-Layer Coating is one of the methods to use paints. This Multi-Layer Coating method can show various designs of external appearance with Foam when it is made with the PC panel. Also, the paint film of the PC panel enables a splendid appearance, and a protective function of concrete is possible, too. Therefore, it makes good durability of the PC. Besides, maintenance is easy to manage because it is free from pollution when it uses metallic materials, stones, or any other materials. You might have no trouble in applying the Multi-Layer Coating method in order to save a merit of an outside Coating on the PC panel. However, the Multi-Layer Coating method used as a current outside Coating method has pollution and bad working environment because Oil Epoxy Resins have toxicity and flammability. Therefore, a lot of warnings are required for coating work in order to have appropriate quality because working hours are short, and production efficiency is low too. These reasons make the cost of construction of the Multi-Layer Coating method increase. And employers or designers may have problems in selecting this Multi-Layer Coating method. Therefore, the purpose of this study is to get activation of the Multi-Layer Coating method by offering improvement measures about the problems of the existing Multi-Layer Coating method.
본 논문에서는 샌드위치 복합재 패널로 제작되는 사용후 핵연료 수송용기 충격완충체의 유효등가 유한 요소모델을 제시하는데 목적을 둔다. 샌드위치 복합재 패널은 금속재 면재와 각각 우레탄 폼, 발사목 그리고 레드우드 심재로 구성되었다. 충격완충체의 유효등가 유한요소 모델은 샌드위치 복합재 패널의 저속충격 시험과 해석결과와의 비교를 통해 제시되었으며, LS-DYNA 3D를 사용한 동적 외연 유한요소해석에 의해 수행되었다. 시험과 해석 결과, 충격완충체 샌드위치 패널의 유한요소 모델은 적층쉘 요소의 면재와 솔리드요소의 심재를 사용한 기존의 혼합모델링 기법에 비해 면재와 심재 모두 솔리드 요소를 적용하는 방법이 더 정확한 결과를 나타냄을 확인하였다. 이때 발사목과 레드우드 심재는 요소제거 기능을 갖는 솔리드 요소로 모델링 되는 것이 추천되어진다.
Liquefied natural gas(LNG) cargo containment system(CCS) has the primary function of ensuring both adequate structural safety with respect to sloshing load which is defined as a violent behaviour of the liquid contents in CCS due to external forced motions and thermal insulation keeping natural gas below its boiling point. Among different LNG CCS types such as independent B-type and membrane ones, Mark III CCS is considered in this paper to perform its strength assessment. Mark III CCS plate is designed and constructed by stacking various non-metallic engineering materials such as plywood, triplex, reinforced PU foam that are supported by series of mastic upon inner steel hull structure. From the viewpoint of structural analysis, this plated structure is treated as a laminated composite structure showing complex structural behaviour under external load. Advanced finite element models of Mark III CCS plate is generated and used in conjunction with ultimate strength based failure criteria from laminated composite mechanics for the strength assessment. The strength assessment is performed within the initial failure state of Mark III CCS plate. Results provide failure details such as failure locations and loads. Finally obtained results are reviewed using the loads from acceptance criteria suggested by classification.
수소 생산을 위한 물 분해 시스템의 효율성을 높이려면 산소 발생 반응(OER, Oxygen Evolution Reaction)에서 촉매로 인해 발생하는 전기화학 반응의 높은 과전압을 감소시켜야 한다. 그중 전이금속을 포함하는 LDH(Layered Double Hydroxide)와 같은 화합물은 현재 사용되고 있는 백금 등의 귀금속을 대체할 수 있는 촉매 소재로 주목받고 있다. 본 연구에서는 저렴한 금속 다공성 물질인 니켈 폼을 지지체로 사용하였고, 수열합성 공정을 통해 NiCo LDH 나노결정을 합성하였다. 또한, OER 특성을 향상시키기 위해 Mo를 도핑하여 합성한 Mo 도핑된 NiCo LDH 나노결정 시료의 형태, 결정구조, 물분해 특성의 변화를 관찰하였다.
촉매 글리콜분해공정은 에스테르 교환반응에 의해 생성된 폴리올과 carbamate 화합물을 회수하여 폴리우레탄 폼 제조에 이용하는 화학적 재활용 방법이다. 본 연구에서는 폴리우레탄 폼을 분해하기 위해 ethyleneglycol, diethyleneglycol, 1,4-butanediol을 사용하였으며, 촉매로는 금속 acetate류를 사용하였다. 촉매글리콜분해 반응온도는 $180{\sim}200^{\circ}C$ 범위에서 수행되었다. 반응속도는 반응시간 경과에 따른 생성물의 점도를 측정하여 조사하였으며, IR과 GPC분석을 통하여 분해 생성물의 종류와 분자량 분포를 조사하였다. 촉매 글리콜분해는 높은 온도에서 ethyleneglycol을 사용했을 때 잘되었다. K, Na, Tl acetate 촉매의 활성이 좋았으며, 생성물들은 비교적 높은 함량의 아민화합물과 carbamate화합물을 함유하고 있었다. Sr acetate와 Quinoline 촉매의 경우 반응은 다소 느리지만 폴리올의 함량이 높았고 부생성물의 함량이 낮았다. 회수폴리올을 20wt%까지 첨가하여 제조한 폴리우레탄 폼의 물성이 버진 폴리올만을 사용하여 제조한 폼에 비해 인장강도, 경도, 인열강도, 압축강도 등이 좋았다.
본 논문에서는 액화천연가스 운송을 위해 사용되는 맴브레인형 Mark III 화물창 시스템의 주요 구조물인, 방열 판 구조물의 파손 강도 평가를 수행한 내용을 다루고 있다. Mark III 방열 판 구조물을 복합적층 구조물로 고려하였으며 상용화된 범용 유한요소 프로그램인 MSC사의 PATRAN과 MARC를 사용하여 Mark III 방열 판 구조물의 유한요소 모델을 개발하였다. 특히, 액화천연가스 화물의 특성으로 인해 Mark III 방열 판 구조물이 접하는 상온에서 극저온에 이르는 광범위한 온도 분포에 따른 재료 물성치 변화를 유한요소 모델에 포함하였다. 이 유한요소 모델을 기반으로 파손 강도 평가 절차가 확립되었으며, 이 때 Mark III 방열 판 구조물의 파손 발생 여부를 판단하기 위해 Hashin, Hill, Hoffman, maximum stress, 그리고 Tsai-Wu와 같은 이방성 파손 기준들을 사용하였다. Mark III 방열 판 구조물의 전반적인 구조적 거동을 이해하였으며 이후 초기 파손 영역에서 강도 평가를 수행하여 파손이 발생되었을 때의 위치와 하중 등을 알 수 있었다.
본 논문은 단위 방사 소자의 이득을 증가시키기 위한 성형 빔 안테나에 관한 것이다. 제안하는 안테나 구조는 크게 여기 소자와 다층 원형 도체 배열 구조로 구성된다. 광대역에 걸쳐 전자파 전력이 다층 원형 도체 배열로 방사하기 위한 여기 소자로 스택 마이크로스트립 패치 소자가 사용되었으며, 고이득 빔 성형을 위한 지향 소자의 역할을 담당하는 다층 원형 도체 배열 소자들은 여기 소자 위에 주기적으로 유한하게 적층되었다. 제안하는 안테나가 고이득 특성을 얻기 위해서는 여기 소자와 다층 원형 도체 배열 소자들 간의 효율적인 전력 결합이 이루어져야 하며, 이를 위해 주어진 설계 규격에 따라 여기 소자 및 다층 원형 도체 배열 소자들의 설계 변수들은 함께 최적화되어야 한다. 본 연구에서는 고이득 성형 빔 안테나는 $9.6{\sim}10.4\;GHz$ 주파수 대역 및 선형 편파 조건하에서 최적화 설계되었으며, 또한 안테나의 다층 원형 도체 배열 소자들을 구현하는 2가지 방법 즉, 얇은 유전체 필름을 이용하는 방법과 유전체 폼을 이용하는 방법들도 제안되었다. 특히, 유전체 필름을 이용하는 안테나에 대해서는 컴퓨터 시뮬레이션 과정을 통해, 원형 도체 배열 소자들의 적층 수에 따른 안테나의 전기적인 성능 변화들을 보여주었다. 유전체 필름(Type 1)과 유전체 폼(Type 2)을 이용한 2종류의 안테나 시제품들을 제작하였으며, 얇은 유전체 필름을 이용한 안테나 시제품에 대해선 시뮬레이션 된 전기적 성능 결과와 비교를 위해 원형 도체 배열 적층 수에 따른 안테나의 전기적인 성능 변화들을 실험하였다. 측정된 이득 성능은 시뮬레이션 이득 성능과 거의 유사한 결과를 보여주었으며, 원형 도체 적층 수에 따라 안테나 이득 변화는 주기성을 보였다. 10 GHz 중심 주파수에서 측정된 Type 1 안테나의 전기적 성능은 원형 도체 배열을 10개 적층(disk10)하였을 때, 15.65 dBi의 최대 안테나 이득과 11.4 dB 이상의 입력 반사 손실 성능을 보여 주었으며, 다층 원형 도체 배열 구조에 의해 약 5 dB의 이득 향상 효과를 얻을 수 있었다. 또한, 원형 도체를 12개 적층하였을 때, 외곽 유전체 링 효과에 의해 Type 1 안테나는 Type 2 안테나보다 상대적으로 약 1.35 dB 만큼 이득이 더 높았으며, 각 안테나의 3 dB 빔 폭은 각각 약 $28^{\circ}$와 $36^{\circ}$로 측정되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.