• Journal of Soil and Groundwater Environment
• /
• v.14 no.3
• /
• pp.32-39
• /
• 2009

This study was conducted in order to get the scientific background for soil pollution criteria. The 92 soil samples derived from various geological units were taken and analyzed to survey natural heavy metal background levels using aqua regia digestion method and 0.1N HCl extraction method. From these results, the average natural contents of metals were 0.287 mg/kg for Cd, 15.26 mg/kg for Cu, 18.43 mg/kg for Pb, 25.36 mg/kg for Cr, 54.27 mg/kg for Zn, 17.68 mg/kg for Ni, 6.83 mg/kg for As by the aqua regia method, and 0.040 mg/kg for Cd, 0.48 mg/kg for Cu, 3.06 mg/kg for Pb, 0.09 mg/kg for Cr, 1.54 mg/kg for Zn, 0.27 mg/kg for Ni, 0.089 mg/kg for As by the 0.1N HCl extraction method. Ratios of soluble contents and total contents were Cd 0.14, Cu 0.03, Pb 0.17, Cr 0.004, Zn 0.03, Ni 0.02, As 0.013 and the correlation coefficients of soluble contents and total contents were 0.24(As), 0.88(Cd), 0.43(Cr), 0.65(Cu), 0.70(Pb), 0.61(Ni), 0.24(Zn). The correlation factor decreased in the order of Cd > Pb > Cu > Ni > Cr > Zn $\approx$ As.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.332-339
• /
• 2015

The objective of this study was to evaluate the effectiveness of different biochars on the removal of heavy metals from aqueous media. The experiment was carried out in aqueous solutions containing $200mg\;CdL^{-1}$ or $200mg\;PbL^{-1}$ using two different biochars derived from soybean stover and orange peel (20 mg Cd or $Pbg^{-1}$ biochar). After shaking for 24 hours, biochars were filtered out, and Cd and Pb in the filtrate were analyzed by flame atomic absorption spectrophotometer (FAAS). In order to provide information regarding metal binding strength on biochars, sequential extraction was performed by modified SM&T (formerly BCR). The results showed that 70~100% of initially added Cd and Pb was adsorbed on biochars and removed from aqueous solution. The removal rate of Pb (95%, 100%) was higher than that of Cd (70%, 91%). In the case of Cd, orange peel derived biochar (91%) showed higher adsorption rate than soybean stover derived biochar (70%). Cd was adsorbed on the biochar mainly in exchangeable and carbonates fraction (1st phase). In contrast, Pb was adsorbed on it mainly in the form of Fe-Mn oxides and residual fraction (2nd and 4th phase). The existence of Cd and Pb as a form of surface-precipitated complex was also observed on the surfaces of biochars detected by field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectrometer (EDAX).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.527-534
• /
• 2019

Japanese sumac (Rhus javanica) is one of the common herbaceous plants growing over the country. This study was conducted to investigate the extraction characteristics and physiological activities inluding nitrite scavenging ability of the water extracts from leaf, fruit and bark of Japanease sumac. Extraction yield was 6.62~13.84%, free amino acids were detected as 24 kinds with 37.9 mg/100g in leaf extract, 23 kinds with 27.0 mg/100g in fruit extract and 27 kinds with 39.0 mg/100g in bark extract, respectively, and seven kinds essential amino acids were detected. Total contents of flavonoids equivalent to naringin were 587.2 mg/100g in bark extract, 557.3 mg/100g in fruit extract and 379.9 mg/100g in leaf extract, respectively. Total contents of phenolics equivalent to gallic acid were 111.2 mg/100g in leaf extract, 108.4 mg/100g in fruit extract and 80.4 mg/100g in bark extract, respectively. The nitrite scavenging ability of extracts was order of 61.93% in bark extract>57.38% in fruit extract>55.49% in leaf extract, and was 78.1~100% of those of BHT (butylated hydroxytoluene) equivalents at pH 1.2. The electron donating ability was order of 47.38% in fruit extract>43.06% in leaf extract>38.55% in bark extract, and was compared to 65.6%, 58.8% and 53.6% of those of BHT equivalents, respectively. The reduction power was evaluated to 37% higher in leaf extract, 43% higher in fruit extract and 46% higher in bark extract than those of BHT equivalents. The metal chelating ability of extracts was considerably low and was order of 27.3% in bark extract>20.6% in leaf extract>11.2% in fruit extract.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.36-46
• /
• 2024

We investigated a hydrometallurgical process of nickel recovery from Inconel 713C scrap. The process proceeded with a series of i) comminution of pyrometallurgical treated scrap, ii) sulfuric acid leaching, iii) solvent extraction of unreacted acid, molybdenum, aluminum, and precipitation of chromium, iv) crystallization of nickel sulfate by vacuum evaporation, and v) nickel electrowinning. The nickel-aluminum intermetallic compound, Ni₂Al₃, was formed by the pyrometallurgical pretreatment readily grounded under 75 ㎛. Sulfuric acid leaching was done for 2 hours in 2 mol/L, 20 g/L solid/liquid ratio, and 80 ℃. It revealed that over 98 % of nickel and aluminum was dissolved, whereas 28 % of molybdenum was. A nickel sulfate solution with 2.34 g/L for the crystallization of nickel sulfate hydrate was prepared via solvent extraction and precipitation. Over 99 % of molybdenum and aluminum and 93 % of chromium was removed. Nickel metal with 99.9 % purity was obtained by electrowinning with the nickel sulfate monohydrate in the cell equipped with anion exchange membranes for catholyte pH control. The membrane did not work well, resulting in a low current efficiency of 73.3 %.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.35-42
• /
• 2003

To use ferro copper slag as aggregate in the construction, an evaluation upon the two kinds of ferro copper slag being produced was conducted to determine the basic physical, and mechanical properties, chemical component and environmental noxiousness. As a result of experiment, it was found that two kinds of ferro copper slag satisfies the physical and mechanical properties of aggregate, prescribed in KS F 2526, and that in the result of noxious heavy metal eruption test by single bach extraction, no eruption of noxious heavy metal was detected or the eruption was far below the reference value. And mortar test was conducted by replacing sand of 25, 50, 75, 100% and the performance level was presented upon reviewing the fluidity property and variable aspects of unit weight. The increase of strength in accordance with replacement rate of sand was found to be the below than the equivalent level compared to the testing specimens that did not use ferro copper slag, but those of 25% replacement rate was above than 0%. Thus, two kinds of ferro copper slag, produced in the domestic, were found to be possessing the enough physical properties to use as concrete aggregate assuming that used with sand and in particular, it was reviewed to be advantageous in manufacturing concrete or mortar that requires weight.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1357-1364
• /
• 2000

Our study was performed to evaluate the effect of leaching parameters including the physicochemical characteristics and the fractionated composition of heavy metals on the release of heavy metals in fly ash discharged from MSWI. Leaching parameters such as pH, CEC, particle size, and exchangeable fraction among the fractional composition classified by sequential extraction procedure are considered. The leaching rate of heavy metal released by KSLT method is largely dependent on the pH of fly ash. The effect of pH on the release of heavy metals is different from elements. It appears that the leaching rate of cadmium and copper decreases with increasing pH, while lead and zinc increases at the condition of neutral or strong alkali condition, which suggests that the leaching of heavy metals are limited by the solubility. It is found that the effect of CEC is similarly to that of pH, $D_{10}$ among the particle size of fly ash is negative correlated with the concentration of heavy metals leached by KSLT method. In the case of exchangeable fraction, the leaching rate of heavy metals is linearly correlated with the exchangeable fraction for the fly ash below 40 meq/l00g of CEC, but not related out of the range.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.3-16
• /
• 2014

Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.338-356
• /
• 1994

Sediment samples from the continental shelf of the South Sea of Korea are analysed to determine the concentration of Al, Fe, Mn, cu, Ni, Zn, Co, Cr and Pb. among these samples, fine-grained sediments were also analysed by a sequential extraction technique to know geochemical forms of the metals in this environments. The total concentration of Al, Fe, Cr, Ni, Cu and Zn in bulk sediments decreased gradually with the increase of distance from the coastal zone. This distribution patterns are well coincide with grain size distribution. However, the patterns of Mn, co and Pb do not follow such and overall distribution. The concentration of Pb, particularly, did not show any features in areal distribution, which may be result from different pathways to the sediments, compared to the other metals. the speculation data show that a considerable amount of Cd, Mn and Co are bounded in the carbonate fraction, accounting for 42.8%, 40.3% and 30.6%, respectively. Cu, Zn, Mn and Fe are largely associated to oxide fraction with proportions of 34.4%, 23.1%, 15.5% and 13.7%, respectively. However, the metals in residual fraction account for more than 50% of the total metal concentration, except for Mn. These observations emphasize that residual fraction in the dominant component controlling the elemental concentration.quartz and glauconite grains.Accordingly,these sediments are interpreted as an extension part of transgressive sand deposit that are widely distributed on the continental shalf floor of southern Yellow Sea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.249-258
• /
• 2013

The purpose of this study was to investigate how image magnification in dental panoramic radiography is influenced by object position. Five metal balls (4 mm in diameter, 2 for the anterior and 3 for the posterior region on the right side) were placed above alveolar crest of dry skull considering extraction socket and dental arch. Dry skull was radiographed using OP-100D (Instrumentarium Imaging Co., Tuusula, Finland) at proper and displaced position along the sagittal and transverse plane at 3 mm, 6 mm, 9 mm, 12 mm and 15 mm using special mount which can control precise movement. Images were stored in DICOM files and were measured by ruler equipped within INFINITT PACS software (Infinitt Co., Ltd., Seoul, Korea). The mean horizontal magnification was 1.224-1.439 and mean vertical magnification was 1.286 - 1.345 at proper position. Vertical magnification resulted in less variation (1.245-1.418) than horizontal magnification (0.798-6.297) according to the sagittal and transverse displacements. Head positioning is important for linear measurement on panoramic radiography and inclusion of standard object (for instance, metal ball) is helpful to anticipate exact magnification of panoramic radiographs at various location.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.791-803
• /
• 2007

The purpose of this study was to evaluate exophytically vertical bone formation in residual ridge of the beagle dog by the concept of guided bone regeneration with a titanium reinforced e-PTFE membrane combined with irradiated cancellous human bone. Twelve male beagle dogs(mean age 1.5 years and mean weight 12kg) were used for this study. The alveolar ridges after extraction of all mandibular premolars were surgically and horizontally removed. At 8 weeks after extractions, full-thickness flap was reflected and cortical bone was removed with round bur and copious irrigation. Rectangular parallelepiped(10mm in length, 5mm in width, and 4mm in height) bended with titanium-reinforced e-PTFE(TR e-PTFE) membrane was placed on the decorticated alveolar ridge, fixed with metal pins and covered with full-thickness flap and assigned as a control group. Test groups ere treated with TR e-PTFE membrane filled with irradiated cancellous human bone. Of twelve beagle dogs, four control dogs and four test dogs without membrane exposure to oral cavity were sacrificed at 8 and 16 weeks respectively. The surgical sites were dissected out, fixed in 4% buffered formaldehyde, dyed using a Villanueva staining technique, and processed for embedding in plastic resin. The cutting and grinding methods were routinely processed for histologic and histomophometric analyis of exophytic bone formation as well as statistical analysis. The results of this study were as follows: 1. Exophytic bone formation in the both of experimental groups was increased respectively after surgery from 23.40% at 8 weeks to 46.26% at 16 weeks in the control groups, from 40.23% at 8 weeks to 47.11% at 16 weeks in the test groups(p<0.05). 2. At 8 weeks after surgery, exophytic bone formation was made 40.23% in the test groups and 33.40% in the control groups. Exophytic bone formation was significantly made in the test group more than in the control group. At 16 weeks after surgery, exophytic bone formation was made 44.11% in the test groups and 46.26% in the control groups. Exophytic bone formation was made in the test groups more than in the control groups, but there was no statistically significant differences. 3. The membrane was fixed with metal pins to closely contact it to the bone surface. So, collapse and deviation of the membrane could be prevented and in growth of connective tissue also could be blocked from the periphery of the membrane. On the basis of these findings, wee suggest that intraoral experimental model for exophytic bone formation may be effective to evaluate the effect of bone graft material. And it indicates that combined use of membrane and ICB graft material is more effective than use of membrane only for exophytic bone formation.