• Bulletin of the Korean Chemical Society
• /
• 제9권5호
• /
• pp.292-295
• /
• 1988

Macrocyclic ligands have been studies as cation carriers in a bulk liquid membrane system. $Cu^{2+}$ has been transported using nitrogen substituted macrocycles as carriers and several transition metal ions($M^{n+}\;=\;Mn^{2+},\;Co^{2+},\;Ni^{2+},\;Cd^{2+},\;Pb^{2+}\;and\;Ag^{+}$) have been transported using $DBN_3O_2,\;DBN_2O_2,\;Me_6N_414C4$ and DA18C6 as carriers in a bulk liquid membrane system. Competitive $Cu^{2+}-M2^+$ transport studies have also been carried out for the same system. In single cation transport experiments, the best macrocyclic ligand for transport is a ligand that gives a moderately stable rather than very stable complex in the extraction. However, when both cations are present in the source phase, the cation which forms the most stable complex with carrier is favored in transport over other cations. Generally, the nitrogen substiituted macrocycles transport $Cu^{2+}$ selectively over $Mn^+$. Ligand structure, equilibrium constant (or stability constant) for complex formation, source phase pH and carrier concentration are also important parameters in transport experiments.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.556-558
• /
• 1999

Lead-selective PVC membrane electrodes based on newly synthesized bis(crown ether)s containing 18-crown-6 moiety was prepared using standard PVC membrane composition. In order to monitor lead in environmental samples by lead sensor, especially good selectivity over alkali and alkaline earth metals has to be obtained. Thus, responses of the PVC membrane prepared with new bis(crown ether)s and Fluka ionophore V (crown ether) base to various cations include lead, alkali and alkaline earth metal ions were investigated for their use as a lead sensor. The polymeric liquid membrane based on trans-1 8-crown-6 ether exhibits the best overall potentiometric performances as a lead-selective electrode in terms of a wide linear dynamic range (between 10-6 and 10-2 M, Pb2+), excellent detection limit (less than 10-6 M) and good durability within limited error. The preferences of lead over other cations, such as Ag+, Hg2+, Na+, Ca2+ and even K+ in the aforementioned electrode are much better than the Fluka ionophore V system.

• Archives of Pharmacal Research
• /
• 제9권4호
• /
• pp.211-214
• /
• 1986

A simultaneous determination method of alkaline earth metals was attempted with the conventional high performance liquid chromatographic system. Four cations, namely, magnesium, calcium, strontium and barium ion, were injected directly as aqueous solution into an eluent containing copper chloride solution and and were successfully separated and determined on a separating column (Zipax SCX, 4.6 mm i.d. ${\times}25$ cm length, Du Pont, USA) by using a variable wavelength UV detector. The linear calibration curves were obtianed in the range from $1.0{\times}10^{-4}M$ to $5.0{\times}10^{-4}M$ and the correlation coefficient of the calibration curve for each metal of magnesium and calcium in tap water. Alkaline earth metals were determined with the conventional high performance liquid chromatographic system.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.310-317
• /
• 2003

Two-component ceramic (alumina-zirconia) composites were fabricated by a soft-solution process in which polyethylene glycol (PEG) was used as a polymeric carrier. Metal salts and PEG were dissolved in ethyl alcohol without any precipitation in 1:1 volume ratio of alumina and zirconia. In the non-aqueous system, the flammable solvent made explosive, exothermic reaction during drying process. The reaction resulted in formation of volume expanded, porous precursor powders by a vigorous decomposition of organic components in the precursor sol. The PEG content affected the grain size of sintered composites as well as the morphology of precursor powders. The difference of microstructure in sintered composite was attribute to the solubility and homogeneity of metal cations in precursor sol. At the optimum amount of the PEG polymer, the metal ions were dispersed effectively in solution and a homogeneous polymeric network was formed. It made less agglomerated particles in the precursor sol and affected on uniform grain size in sintered composite.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.141-146
• /
• 2005

Calix[4]crown-6-2,4-bis(4-aminobutyl ether), which has a crown-6 moiety at the 1,3-position and amino function at the 2,4-position, was prepared as an intermediate for the subsequent synthesis of calix[4]crown-6-containing polyamide and polyimide using adipoyl chloride and 1,2,4,5-benzenetetracarboxylic dianhydride. The chemical structures were characterized by IR, $^{1}H NMR$ spectroscopy and elemental analysis, and some of their physical properties, including their thermal behavior, were examined. The ion binding characteristics of the monomer and polymers for alkali metal and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. It has been observed that polyamide has a high binding ability towards various metal cations as compared to polyimide, which showed cesium ion selectivity.

• Bulletin of the Korean Chemical Society
• /
• 제4권2호
• /
• pp.76-79
• /
• 1983

The elution behaviors of a series of metal complexes, such as $Co(gly)_{3}$, $[Ni(en)_{3}]^{2+}$, $[Ni(phen)_3]^{2+}$, $[Fe(phen)_3]^{2+}$, $[Co(phen)_3]^3+$, $[Co(tn)_3]^3+$, $[Co(en)_3]^3+$ and $[Co(NH_3)_6]^3+$ (where gly; glycine, phen; phenanthroline, tn; trimethylenediamine, en; ethylenediamine), were studied in aqueous solution by measuring the retention volumes (v values) on SP-Sephadex C-25, cation exchange resin. It was found that the elution behaviors of metal complexes were apparently affected by salt concentrations, kinds of cations in eluent and kinds of anions in eluent, and according to the degrees of their effects coulombic forces, ion exchange capacities, the 'solvent effect' of resin backbone, hydrophobicity and hydrophilicity were applied to explain the elution mechanism.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.218-222
• /
• 1998

Removal of Cd(Ⅱ), Zn(Ⅱ) and Cu(Ⅱ) from aqueous solutions using the adsorption process on magadiite has been investigated. It was found that the removal percentage of metal cations at equilibrium increases with increasing temperature, and follows the order of Cd(Ⅱ) > Cu(Ⅱ) > Zn(Ⅱ). Equilibrium modeling of adsorption showed that the adsorptions of Cd(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) were fitted to Langmuir isotherm. Kinetic modeling of the adsorption showed that first order reversible kinetic model fitted to experimental data. From kinetic model and equilibrium data, the overall rate constant (k) and the equilibrium constant (K) for the adsorption process were calculated. The overall rates of adsorption of metal ions follow the order of Cd(Ⅱ) > Cu(Ⅱ) > Zn(Ⅱ). From the results of thermodynamic analysis, standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) of adsorption process were calculated.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.366-372
• /
• 1987

Cryptand[2,2] was grafted to low crosslinked styrene-divinylbenzene copolymer by substitution reaction with chloromethylated styrene-divinylbenzene copolymer. This resin was stable in concentrated acid and base, and showed a good resistance to heat. The pH, time, and concentration dependence of the adsorption of metal ions by this resin were studied. Studies on the chromatographic separation of lanthanides, $Cu^{2+}$ and $UO_2^{2+_2}$ were also carried out with various eluents. These studies demonstrate that this resin has the applicability to the preconcentration and separation of metal ions.

• 멤브레인
• /
• 제12권1호
• /
• pp.51-53
• /
• 2002

Poly(vinyl alcohol) (PVA)/sulfosuccinic acid $(SSA)-H^+$ 막은 1가 이온 $Li^+, Na^+,K^ + 2$가 이온 $Mg^{2+}, Ca^{2+},Ba^{2+}, 3$가 이온 $Al^{3+}$로 치환하였다. 또한 $Li^{+}$의 경우 치환도를 화하였다. 금속이온치환의 효과를 알아보기 위하여 Diffusion cell을 이용한 메탄올투과도를 측정하였다. 메탄올투과도를 1가 이온의 경우는 'Salting-out'효과뿐 아니라 electrostatic 가교와 금속 이온의 반응성에 의존한다고 사료되었다. 또한 $Li^+$이온이 경우 치환도에 비례하여 메탄올 투과도가 감소하였는데 이는 'Salting-out'효과에 기인한다고 사료되어진다.

• 폴리머
• /
• 제33권6호
• /
• pp.555-560
• /
• 2009

설폰화된 6FDA 계열의 폴리이미드의 설폰간기에 1가 이온($Li^+$, $Na^+$, $K^+$)과 2가 이온($Mg^{2+}$, $Ca^{2+}$, $Ba^{2+}$)이 치환되어졌으며, 이러한 금속이온의 치환효과가 $CO_2$, $O_2$ 및 $N_2$등의 기체 투과도와 선택도에 미치는 영향에 대하여 조사하였다. 설폰화된 폴리이미드의 열적 안정성이 금속이온을 치환함으로써 향상된 것을 열중량기 분석을 통하여 확인되었다. 1가 이온으로 치환된 막의 투과도는 이온반경 [$Li^+$(0.059 nm)>$Na^+$(0.102 nm)>$K^+$(0.138 nm)]의 순서로 감소하며, 2가 이온의 경우 이온반경과 고분자와 금속이온 간의 전기적 가교로 인하여 결정되어짐을 알 수 있었다. 반면에, 금속이온으로 치환된 설폰화된 폴리이미드 막의 선택도는 치환되지 않은 막에 비하여 향상된 것을 알 수 있었다. $K^+$이온으로 치환된 설폰화된 폴리이미드 막의 산소 투과도는 89.98 Barred[$1\times10^{-10}\;cm^3$(STP) $cm/cm^2{\cdot}s{\cdot}cmHg$]을 나타내어 원래의 폴리이미드 막의 산소 투과도인 126.5 Barrer 보다 현저히 줄었으며, $Li^+$으로 치환된 막의 $O_2/N_2$선택도는 12.9를 나타내어 원래의 4.2보다 크게 향상되어졌다.