• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.53-56
• /
• 1995

Electrolytic In-Process Dressing grinding technique which enables application of metal bond wheels with fine superabrasives in mirror surface grinding operations has developed. This paper provides charateristic evaluation of power supply supply that we developed and general charateristics of ELID grinding. The electric behaviors are compared each about two different electrode which has 1/4, 1/6 the area of entire wheel surface, and two different fluids which has 1:50, 1:30 the quantity of water was used to dillute grinding fluids. The results show that ELID grinding method is useful for mirror surface machining.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.105-108
• /
• 1995

The inter-metal dielectric SiOF films were fabricated using remote plasma-enhanced chemical vapour deposition with addition of SF$\sub$6/ gas. SiOF bond formation in these films was recognized by a chemical bonding structural study using FT-IR. The deposition rate and the dielectric constant of a deposited films were decreased with increasing SF$\sub$6/ gas. It was observed that leakage current of SiOF film was reduced the one order compared to a film without addtion of SF$\sub$6/ gas.

• Electronics and Telecommunications Trends
• /
• v.29 no.6
• /
• pp.43-52
• /
• 2014

수 원자층 두께의 전이금속 칼코겐화물 이차원 반도체 소재는 스위칭 소자 등에 활용하기에 적합한 밴드갭 에너지를 가지며, 높은 이동도와 우수한 광반응성으로 인해 최근 큰 관심을 끌고 있다. 특히 이차원 소재이므로 dangling bond가 없다는 점, 구조적 안정성, 실리콘에 뒤지지 않는 고이동도, 직접천이 특성 등으로 인해 차세대 전자소자용, 더 나아가 실리콘 반도체 대체 소재로써의 가능성도 점쳐지고 있다. 본고에서는 전이금속 칼코겐화물 이차원 반도체의 소재 특성과 제조방법, 소자 응용면에서의 기술개발 동향, 시장전망 등에 대해 소개하고, 이 소재가 현재 기대하는 만큼 중요하게 활용되고 기술이 발전하기 위해서 반드시 해결해야 할 숙제 등에 대해 논의하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.148-154
• /
• 1982

The effects of the various ligands on the oscillator strengths of the hypersensitive transitions of Nd(III) and Ho(III) have been studied in aqueous solution. The ligands used in the study are furoate, anthranilate, and squarate. The covalent character of the metal-ligand bond in the complex is discussed on the basis of the correlation diagram between pKa of the ligands and the oscillator strengths of the complexes previously reported.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.848-851
• /
• 2003

In this paper, a separating system for used CRT recycling is presented. Depend on manufacturer CRTs has small differences in dimension for the same model, but the dimensions of the panel are nearly same. To simplifying configuration of the system, we developed CRT fixing pallets for every model of CRT. The height of cutting position for every model of CRT will be same. The cutting machine has two rotating arm and use metal-bond type diamond cutting wheel. Instead of water, two vortex tube type air-coolers are used for the cooling of cutter. Workers in recycling factory are generally old people. Therefore, control program should be easy to use and operate. Thus we developed GUI with very simple interface.

• YAKHAK HOEJI
• /
• v.38 no.4
• /
• pp.418-424
• /
• 1994

Lectin from mistletoe (Viscum coloratum) were obtained by salt fractionation, gel filtration and anion exchange chromatography. A molecular weight of about 60,000D has been determined by SDS-PAGE and two basic subunits which have molecular weights of 33,000D and 28,000D are linked by a disulfide bond. The partially purified mistletoe lectins agglutinated human B erythrocytes. Agglutinating activity was relatively stable at varied pH $(3.77{\sim}8.71)$ and at temperature range of $0{\sim}40^{\circ}C$ and not affected by 9 metal ions. Galactose, lactose and N-acetyl-D- galactosamine inhibited agglutinating activity of lectin. Lectin from mistletoe was more mitogenic to murine lymphocytes than concanavalin A.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.192-194
• /
• 2008

A series of non-free hydride reducing systems containing boron or aluminum atom, which possess no metal-hydride bond but an available hydrogen at a branched ${\beta}$-position, has been applied to the selective reduction (chemo--, regio-, and stereoselective reduction) of organic compounds. The systems, comprised of diisopinocampheylborane and diisobutylalane derivatives, exhibited almost perfect selectivities in the reduction of aldehydes and ketones. The characteristics features of this systems leading to a perfect transformation have been depicted in this report, especially in the 1) Reduction of ${\alpha}$,${\beta}$-Unsaturated Carbonyl Compounds to Allylic Alcohols via 1,2-Reduction, 2) Chemoselective Reduction between Structurally Different Carbonyl Compounds, and 3) Stereoselective Reduction of Cyclic Ketones.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.4
• /
• pp.219-224
• /
• 1995

The peel adhesion and plastic deformation in Cu-Cr alloy films, sputter-deposited onto polyimide films, have been studied as a function of Cr content in the film. The adhesion strength has been measured by T-peel test and the amount of plastic deformation in the peeled metal strip was determined qualitatively by XRD technique. Peel adhesion strength has a maximum in the film containing 22-33wt.% Cr and the peel strength of pure Cr film is lower than the maximum. The film having the highest peel strength is deformed most heavily. The effect of Cr content on the peel strength is discussed in terms of the interfacial bond strength and mechanical properties of Cu-Cr alloy film.

• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.140-145
• /
• 2016

In this paper, we fabricate arrayed-type flexible capacitive touch sensor using liquid metal (LM) droplets (4 mm spatial resolution). Poly-4-vinylphenol (PVP) layer is used as a dielectric layer on the electrode patterned Polyethylene naphthalate (PEN) film. Bonding tests between hydroxyl group (-OH) on the PVP film and polydimethylsiloxane (PDMS) are conducted in a various $O_2$ plasma treatment conditions. Through the tests, we can confirm that non-$O_2$ plasma treated PVP layer and $O_2$ plasma treated PDMS can make a chemical bond. To measure dynamic range of the device, one-cell experiments are conducted and we confirmed that the fabricated device has a large dynamic range (~60 pF).

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.110-117
• /
• 2005

Underwater wet arc welds were experimentally performed on 11mm thick KR-RA steel plate using six different types of flux coated electrodes of 4.0mm diameter, KSKR, KSKT, USBL, JPUW, UWEA and UWEB. From analysis of bead appearance, detachability of weld slag, spatter occurrence and arc stability, JPUW gives the best result, and UWEB is superior to KSKR and KSKT. By experimental result of hardness distribution on the weld bonds, UWEB weld has the narrowest bond structure which is probable condition to get the best mechanical properties of weld. UWEB and JPUW welds have more even hardness distribution across weld deposit and base metal. Upon polarization test to measure the respondency of corrosion, the electrode of UWEB shows the most excellent degree due to the low open circuit potential difference.