• Journal of Magnetics
• /
• 제11권2호
• /
• pp.98-102
• /
• 2006

It was examined in this study that magnetic beads, which are assumed to be environmentally functional, could be effective in processing heavy metals that are water pollutants. For the purpose, magnetic beads containing carboxyl groups, which has strong binding force with heavy metals, are mixed with each Cd, Pb, Ni, Cu and Cr(III) solution, then stirred in pH 6. As a results of the process, it was proven that heavy metals bind quickly with magnetic beads through the reaction. In order to analyze heavy metal concentration, magnetic beads bind with heavy metal were collected by external magnetic force and dissolved in acid. The graphite furnace AAS was used to get heavy metal concentration melted in the acid solution. The results showed that heavy metal extractions by magnetic beads were influenced by the type and the concentration of a heavy metal, and over 90% of a heavy metal can be extracted in ppm level save for Cr(III). It was also examined in the study whether heavy metal extraction is influenced when other ions exist in each heavy metal solution. According to experiment, adding other heavy metals to a solution did have little influence on extracting an intended heavy metal. But in case salt or heavy metal chelate was added, Ni extraction changed sensitively although extracting other heavy metals were influenced only when the concentration of an added substance is high. In conclusion, it was shown that magnetic beads could be used to treat wastewater with relatively high heavy metal concentration.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.113-123
• /
• 1985

The purpose of this study was to evaluate the marginal fitness of collarless metal-ceramic crown formed with direct lift technique using wax compared with metal-ceramic crown with metal butt margin. Twenty crowns, ten were collarless metal-ceramic crowns and ten were metal-ceramic crowns with metal butt margins, were made and cemented on epoxy resin dies, and their marginal openings were measured on scanning electron microphotographic prints at x200 magnification. The results were as follows; 1. In the case of collarless metal-ceramic crowns, the mean marginal opeining was $43.78{\pm}17.67{\mu}m$, the mean maximum marginal opening was $52.81{\pm}19.81{\mu}m$, and the mean minimum marginal opening was $34.99{\pm}16.58{\mu}m$. 2. In the case of metal-ceramic crowns with metal butt margins, the mean marginal opening was $47.62{\pm}25.55{\mu}m$, the mean maximum marginal opening was $61.90{\pm}24.39{\mu}m$, and the mean minimum marginal opening was $34.86{\pm}24.92{\mu}m$. 3. There was no significant difference between two types of crowns at the 99% confidence level. 4. The marginal fitness of collarless metal-ceramic crown formed with direct lift technique using wax was clinically acceptable.

• 대한화학회지
• /
• 제61권6호
• /
• pp.311-319
• /
• 2017

By using Density Functional Theory (DFT), we have performed alkali metal and alkaline earth metal inside fullerene-like BeO cluster (FLBeOC) in terms of energetic, geometric, charge transfer, work function and electronic properties. It has been found that encapsulated processes of the alkali metal are exothermic and thermodynamically more favorable than alkaline earth metal encapsulation, so that interaction energy ($E_{int}$) of the alkali metal encapsulation FLBeOC is in the range of -0.02 to -1.15 eV at level of theory. It is found that, the electronic properties of the pristine fullerene-like BeO cluster are much more sensitive to the alkali metal encapsulation in comparison to alkaline earth metal encapsulation. The alkali and alkaline earth metal encapsulated fullerene-like BeO cluster systems exhibit good sensitivity, promising electronic properties which may be useful for a wide variety of next-generation nano-sensor device components. The encapsulation of alkali and alkali earth metal may increase the electron emission current from the FLBeOC surface by reducing of the work function.

• 분석과학
• /
• 제20권4호
• /
• pp.268-278
• /
• 2007

값이 싸고 효과적인 항 부식제로서 수용성 금속가공유에 첨가되는 아질산염은 수용성 금속가공유에서 미생물 번식을 제어하기 위하여 첨가되는 아민류와 공존 시, 발암성 물질인 니트로소아민류를 생성한다. 본 연구에서는 금속가공, 자동차 부품 제조업 등을 중심으로 현장에서 수거한 금속가공유 원액 및 희석액 중 니트로소 화합물을 생성시키는 아질산염 및 질산염과 에탄올 아민류의 함량을 이온크로마토그라피를 이용하여 분석하고, GC/MS로 분석한 니트로소아민의 분석결과를 비교하여 우리나라 유통 수용성 금속가공유 중 니트로 화합물의 함유실태를 조사하였다. 21개의 금속가공유 희석액 시료 중 11개(52%)의 시료에서 아질산염이 검출되었으며 독일 기준치인 $20{\mu}g/mL$를 초과하는 시료는 3개(14%)였다. 21개의 희석액 중 18개의 희석액에서 니트로소아민(NDELA, N-nitrosodiethanolamine)이 검출되었는데 독일의 권고치인 $5{\mu}g/mL$를 초과하는 시료는 7개(33%)였다. 아질산염의 농도와 NDELA 농도는 $R^2=0.453$, n=19)의 상관성이 관찰되었다.

• 대한예방한의학회지
• /
• 제19권3호
• /
• pp.103-113
• /
• 2015

Objective : Five most generally adopting basic oriental prescriptions (yookmijihwangtang, ojeoksan, sipjeondaebotang, samultang, bojoongikgitang) samples were collected from 10 oriental hospitals nationwide and the transferring ratio to aqueous phase (TRAP) were calculated. Method : The samples are grounded evenly and the decocted at $120^{\circ}C$ for 12 min on hot plate and then filtered. The concentrations of As, Cd, Co, Cr and Pb in before and after decoction were measure by ICP/MS and the TRAPs were calculated. Results : The concentrations of As, Cr and Pb in the ground samples before decoction were all below criteria level, and TRAP values were also very low (<10%). For Cd, although some ground samples before decoction showed relatively high concentration level compare to the criteria level, because of their low TRAP (~3%), the actual concentrations in the decoction were quite low compare the criteria level. The Co's concentrations in the ground samples before decoction were all relatively low level. However, the TRAP of Co was astonishingly high value of around 40% average. Conclusion : The toxic heavy metal concentrations in the decoction were very low compare to the criteria level. The TRAPs are less than <10% except Co. The toxic heavy metals in the prescriptions are mainly remained in the residue and the only very small fraction may transferred to the decoctions. Therefore the toxicity of the oriental herbal medicine about the toxic heavy metal may be overstressed. The Co's TRAP turned out to be quite high value (40% average). Since the criteria level wes not established yet, the safety of decoctions according to Co was not fully confirmed.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.111-119
• /
• 1987

The corrosion fatigue crack propagation characteristics of SS41 steel in 3.5% NaCl solution have been evaluated for loading frequencies of 1Hz and 0.2Hz. A sine wave loading profile was used for fatigue testing. Each test was carried out at a constant stress ratio, R(0.1). The main results are summarized as follows; 1. Fatigue crack propagation rate was higher in 3.5% NaCl solution than in air, higher in the base metal than in the weld metal, and higher at f =0.2Hz than at f =1Hz. 2. The crack closure level of the base metal was not influenced by cyclic frequencies, but that of the weld metal was much influenced. 3. When the crack closure effect was eliminated in the evaluation of crack propagation characteristics by using $\Delta K_{eff}$, the envirommental influence was distinctly observed. At the base metal, crack propagation rate was enhanced by the hydrogen embrittlement, and the weld metal was reduced by the crac closure. 4. There was clearly observed hydrogen embrittlement and severely corroded aspect at fracture surface of lower frequency than that of higher frequency, and at that of base metal than that of the weld metal.

• 한국환경과학회지
• /
• 제17권1호
• /
• pp.57-66
• /
• 2008

The frequency analysis and the probability plot were applied to heavy metal contents of soils collected from the Goseong Cu mine area as a statistic method for the determination of the threshold value which was able to partition a population comprising largely dispersed heavy metal contents into the background and the anomalous populations. Almost all the heavy metal contents of soil showed a positively skewed distributions and their cumulative percentage frequencies plotted as a curved lines on logarithmic probability plot which represent a mixture of two or more overlapping populations. Total Cu, Pb and Cd data and extractable Cu and Pb data could be partitioned into background and anomalous populations by using the inflection in each curve. The others showed a normally distributed population or an largely overlapped populations. The threshold values obtained from replotted frequency distributions with the partitioned populations were Cu 400 mg/kg, Pb 450 mg/kg and Cd 3.5 mg/kg in total contents and Cu 40 mg/kg and Pb 12 mg/kg in extractable contents, respectively. The thresholds for total contents are much higher than the tolerable level of soil pollution proposed by Kloke(Cu 100 mg/kg, Pb 100 mg/kg, Cd 3 mg/kg), but those for extractable contents are not exceeded the worrying level of soil pollution proposed by Ministry of Environment(Cu 50 mg/kg, Pb 100 mg/kg). When the threshold values were used as the criteria of soil pollution in the study area, $9{\sim}19%$ of investigated soil population was in polluted level. The spatial distributions of heavy metal contents greater than threshold values showed that polluted soils with heavy metals are restricted within the mountain soils in the vicinity of abandoned mines.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2489-2497
• /
• 2023

Co and Eu impurities in the SSCs are nuclides that dominantly influence the neutron-induced radioactive inventory in metal and concrete radwastes (radioactive wastes) during NPP decommission. The impurity concentrations provided by NUREG/CR-3474 were used for the practical range of Co and Eu impurity concentrations to be applied to the code calculations. Metal structures near the core were evaluated to be ILW (intermediate-level waste) for the whole range of Co impurity concentration, so the boundary line between ILW and LLW (low-level waste) has no change for the whole concentration range provided by NUREG/CR-3474. Also, the boundary line between VLLW (very low-level waste) and CW (clearance waste) in the concrete shield could alter a little depending on the Eu impurity concentration within the range provided by NUREG/CR-3474. From this work, it is found that the concentration of material impurities of SSCs gives no critical impact on determining radwaste levels.

• 환경위생공학
• /
• 제24권1호
• /
• pp.25-32
• /
• 2009

The analyzed results of the heavy metal concentration of air and soil at the D iron-manufacturing company area were as follows; The concentration of $PM_{2.5}$ in the case area exceeded the air standard level in 3 seasons except summer. The $PM_{10}$ level was similar to the standard level, which was similar to the standard level, which was $50{\mu}g/m^3$. The Pb concentration of air in the case area was $0.13{\mu}g/m^3$, which was slightly higher than $0.11{\mu}g/m^3$ in the control area. The concentration of Cd and Cr were higher in the control area. The heavy metal (Pb) concentration of soil in the case area was $10.7{\mu}g/m^3$, which was higher than that of the control area. For these results, it is necessary for the D iron-manufacturing company area to consider a counter plan for dusts and are duction plan for the heavy metal (Pb).