• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.202-203
• /
• 2003

디젤 엔진에서 발생되는 입자는 대기 오염의 주 오염원이 되고 있다. 따라서 이를 감소시키기 위해 필터(Diesel Particulate Filter :DPF)를 이용한 다양한 후처리 시스템이 개발되고 있다. DPF 시스템에서 가장 많이 사용하는 필터는 cordierite로 구성된 벌집 모양의 세라믹 필터이다. 그러나 이러한 타입의 필터는 여과시 압력강하가 높을 뿐 아니라 재생을 위한 고온 상태에서 낮은 열전도율로 crack이 일어나거나 melting이 있어 필터 자체의 파손의 위험이 있다. (중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제17권5호
• /
• pp.210-216
• /
• 2007

Porous nickel membrane far high precision gas filter was prepared by in-situ reduced/sintered process of NiO with an addition of polymer(PMMA; polymethyl methacrylate). It showed that the porosity of Ni membrane was approximately 52%. It is similar to metal membrane which prepared using metal fiber as raw materials. The average pore diameter and porosity of Ni membrane increased as content of added polymer and decreased as elevating reduced/sintered temperature from $800^{\circ}C$ to $1000^{\circ}C$. Increase of porosity at $800^{\circ}C$ was associated with surface diffusion mechanism that leads to initial sintering, while decrease of porosity at $1000^{\circ}C$ was associated with lattice diffusion and grain boundary diffusion.

• Membrane Journal
• /
• 제17권4호
• /
• pp.381-386
• /
• 2007

Hollow fibers were made using the nickel slurry containing nickel particles and polymers by phase inversion method. And then, metallic filters were fabricated by sintering method at $1,150^{\circ}C$ under reduction condition. Metallic microfiltration membranes were prepared by coating nickel particles on the metallic filter. The properties of the metallic hollow fiber filters and microfiltration membranes such as pore size and strength were investigated. The metallic membrane showed good resistance against acid, base and chlorine. It was observed that the membrane exhibited good recovery rate by back washing.

• Composites Research
• /
• 제12권1호
• /
• pp.68-75
• /
• 1999

This study has observed that the dynamic behavior of Metal Matrix Composites (MMCs) in low velocity impact varies with impact velocity. MMCs with 15 fiber volume percent were fabricated by using the squeeze casting method. The AC8A was used as the matrix, and the alumina and the carbon were used as reinforcements. The tensile and vibration tests conducted yielded the yielded the tensile stress and elastic modulus of MMCs The low pass filter and instrumented impact test machine was adopted to study dynamic behaviors of MMCs corresponding to impact velocity. Stable impact signals were obtained by using the low pass filter. Impact corresponding to impact velocity. Stable impact signals were obtained by using the low pass filter. Impact energy of unreinforced alloy and MM s increased as the impact velocity increased. The increase of crack propagation energy was especially prominent, but the dynamic toughness of each material did not change much. To show the relation between crack initiation energy and dynamic fracture toughness, a simple model was proposed by using the strain energy and stress distribution at notch. The model revealed that crack initiation energy is proportional to the square of dynamic fracture toughness and inversely proportional to elastic modulus.

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.68-74
• /
• 2004

This work presents a series of experimental tests on new practical approaches in membrane design to improve extraction capacity and rate. We chose an extraction system involving Aliquat 336 as the extractant and Cd(II) as the metal ion to be extracted to demonstrate these new approaches. The core element in the new membrane assembly was the extractant loaded sintered glass filter. This membrane assembly provided a large interface area between the extractant and the aqueous solution containing metal ions. By recycling the aqueous solution through the membrane assembly, the extraction rate was significantly improved. The membrane assembly also offered good extraction capacity.

• Korean Journal of Optics and Photonics
• /
• 제18권3호
• /
• pp.190-195
• /
• 2007

A novel optical coupling filter with finite-thickness metal-strip gratings printed on optical planar dielectric slabs is proposed, and Bragg conditions of the device are rigorously evaluated by using Modal Transmission-Line Theory (MTLT). The numerical results reveal that the guiding structures have filtering properties due to a leaky-wave stop-band while conventional DFB guiding structures consisted of dielectric gratings depend on a feedback-wave stop-band. Consequently, it shows that the optical coupling titter dependent on the leaky-wave filtering characteristics can be compounded of such optical devices as LD and optical fiber.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.231-235
• /
• 2020

Industrialization and modern developments have led to an influx of toxic heavy metals into the aquatic environment, and the accumulation of heavy metals has serious adverse effects on humans. Among the various heavy metal treatment methods, adsorption is very useful and frequently used. Plastic materials, such as polypropylene and polyethylene, have been widely used as filter media due to their mechanical and chemical stability. However, the surface of plastic material is inert and therefore the adsorption capability of heavy metals is very limited. In this study, granular media and fiber media composed of polypropylene and polyethylene are used, and the surface modification was conducted in order to increase adsorption capability toward heavy metals. Oxygen plasma generated hydroxyl groups on the surface of the media to activate the surface, and then acrylic acid was synthesized on the surface. The grafted carboxyl group was confirmed by FT-IR and SEM. Heavy metal adsorption capability of pristine and surface modified adsorbents was also evaluated. Overall, heavy metal adsorption capability was increased by surface modification due to electrostatic interaction between the carboxyl groups and heavy metal ions. Fibrous PP/PE showed lower improvement compared to granular PP media because pore blockage occurred by the surface modification step, thereby inhibiting mass transfer.

• Tribology and Lubricants
• /
• 제39권4호
• /
• pp.133-138
• /
• 2023

This paper presents a discussion on lubricating oil filters. The maintenance of lubricating oil filters can improve the performance of mechanical systems and extend the service life of the lubricating oil. Therefore, the effective management of the lubricating oil can extend the service life of the machine and reduce maintenance costs. A representative method for managing lubricating oil is filtering the lubricating oil using a lubricant filter. However, effectively managing a lubricating oil using a lubricant filter requires an understanding of the related knowledge. In this paper, we present the definition, classification, characteristics, specifications, performance, and self-cleaning function of lubricating oil filters. The lubricant filters are classified based on the filter material, filtering method, filtering location, and amount of filtered fluid. Cellulose and glass fiber materials are conventionally used as materials for lubricant filters, and recently, metal materials, which show excellent durability, are being increasingly adopted. The filtering methods can be classified into physical, chemical, magnetic, and electric field methods, and the lubricant filters can be classified according to their location in the lubrication system. The beta ratio and efficiency of the lubricant filter can be determined based on the performance of the filter. Finally, there are many products or technologies that add a self-cleaning function to the filter to remove foreign substances or contaminants for efficient management.

• Korean Journal of Optics and Photonics
• /
• 제18권2호
• /
• pp.142-148
• /
• 2007

A mechanically induced long-period fiber grating array was fabricated and its transmission characteristics were measured. The grating away consisted of a rubber cover and a 45 cm metal bar with 10 grating groups. Each grating group was composed of 60 gratings. The period of the grating of the grating groups was increased by $10{\mu}m$ increments from $690{\mu}m$ to $780{\mu}m$. The long period fiber grating was induced when the pressure was applied on the long period grating array and the resonant wavelength depended on the position of applied pressure. The experimental results shows that this long period fiber grating away can be used as a various band rejection filter or a fiber optic sensor.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.775-780
• /
• 2014

Micellar enhanced ultrafiltration (MEUF) was used to remove cadmium from an aqueous solution using sodium dodecyl sulfate (SDS) as a surfactant. Operational parameters such as initial permeate flux, retentate pressure, initial cadmium concentration, pH solution, molecular weight cut-off (MWCO), and molar ratio of cadmium to SDS were investigated. Removal efficiency of cadmium from an aqueous solution increased with an increase of retentate pressure, pH solution and molar ratio of cadmium to SDS, and decreased with an increase of initial permeate flux. Higher removal efficiency of cadmium from the aqueous solution was achieved using lower MWCO (smaller membrane pore size). Under optimized experimental condition, cadmium removal efficiency reached 74.6 % within an hour. Using MEUF-ACF hybrid process the removal efficiency of both cadmium and SDS was found to be over 90%.