• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.144-151
• /
• 2010

본 연구에서는 고비용의 실리카흄의 대체재로서 인산부산석고와 카올린을 활용한 시멘트매트릭스의 화학적, 기계적 성질에 대하여 분석하였다. 실험을 위하여 인산부산석고는 이수석고 형태인 건조석고, 반수석고, III형 무수석고, II형 무수석고로 실험용시료를 제조하였으며, $900^{\circ}C$에서 소성된 카올린은 서냉과 급냉의 형태로 제조된 메타카올린의 형태로 제조하였다. 또한 이재료를 활용하여 혼합시멘트를 제조하였으며, 제조된 시멘트를 사용하여 실리카 흄을 혼입한 시멘트 매트릭스와 재료적 성능을 비교 평가하였다. 실험결과 급냉 제조된 메타카올린이 다른 재료에 비하여 성능이 우수한 것으로 분석되었다.

• 대한간호학회지
• /
• 제34권6호
• /
• pp.934-944
• /
• 2004

Purpose: This meta-analysis was conducted to evaluate the effects of a self-efficacy promoting program and analyze its components. Method: The material used for this study were 18 self-efficacy promoting program studies carried out from Jan. 1980 to Oct. 2003. The studies were analyzed in differen categories: 1) types of dependent variables 2) sample characteristics 3) types of experimental treatment conditions 4) types of self-efficacy source and 5) total amount of time Result: 1) The weighted mean of a self-efficacy promoting program ranged from 1.383 to 0.015 2) for the experimental treatment condition, exercise had a much larger effect in increasing general self-efficacy and self-care than education 3) the studies using 3 sources had a much larger effect in increasing self-care than the studies using 4 sources 4) a time period longer than 900 minutes had a much larger effect in increasing specific self-efficacy, general self-efficacy and self-care than in a time period shorter than 900 minutes. 5) effect size of specific self-efficacy was significantly higher than general self-efficacy. Conclusion: These results can be used to guide the development of a self-efficacy promoting program for nursing practice.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.216-222
• /
• 2010

Portland cement has been restricted in applications to ecological area because of its environmental harmfulness and the $CO_2$ emission during a production process. Geopolymer materials attract some attention as an inorganic binder due to their superior mechanical and eco-friendly properties. In this study, geopolymer-based cement was prepared by using aluminosilicate minerals (flyash, meta-kaolin) with alkaline-activators and its compressive strength with concentration of alkaline-activators was investigated. Aluminosilicate-based geopolymers were obtained by mixing aluminosilicate minerals, alkaline solution (NaOH or KOH with different concentration) and water-glass under the vigorous stirring for 20 min. Compressive strength after curing at $30^{\circ}C$ for 3 days increased with the concentration of alkaline-activator due to the enhanced polymerization of the aluminosilicate materials and dense microstructure. Aluminosilicate-based geopolymer cement using KOH as an alkaline-activator showed high compressive strength compared with NaOH activator. In addition, geopolymer cement using fly-ash as a raw material showed higher compressive strength than that of meta-kaolin.

• 한국디지털건축인테리어학회논문집
• /
• 제12권4호
• /
• pp.87-95
• /
• 2012

Autoclaved lightweight concrete (ALC), also known as autoclaved aerated concrete (AAC), is a lightweight, precast building material that simultaneously provides structure, insulation. ALC is a unique building material. Because of its cellular nature, it is lightweight, self-insulating, as well as sound and fireproof. ALC products include blocks, wall panels, floor and roof panels, and lintels. Recently, the use of ALC has became increasingly popular. However, ALC have high water absorption, low compressive strength and popout the origin of the low surface strength in its properties. Thus, this study is to improve the fundamental strength by controls of increasing of admixtures and chemical reactants. Admixtures make use of meta kaolin and silica fume, chemical reactants make use of sodium silicate and sodium hydroxide. From the test result, the ALC using admixtures and chemical reactants have a good fundamental properties compared with plain ALC. These good fundamental properties is caused by the admixtures and chemical reactants of ALC by the reason of the micro filling effect and chemical binding of C-S-H gel, tobermolite and quartz.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.1-11
• /
• 2022

As data-based research activities and outcomes increase and ontact or non-face-to-face activities become common, the demand for easy utilization of resources, tools, functions, and easily accessible information required for research in the R&D sector has increased accordingly. With the rapid increase in the demand for collaborative research based on online platforms, research support institutions strive to provide venues for research activities that merge various information and functions. ScienceON, an integrated science & technology (S&T) knowledge infrastructure service developed and operated by the Korea Institute of S&T Information (KISTI), supports open collaboration by connecting and merging all the information, functions, and infrastructure required for research activities. This paper describes the online research activity support tool provided by ScienceON and the remarkable results achieved through this activity. Specifically, the excellent creation of the following flow of meta-material research activities in the ontact space is elucidated. First, the papers required for a meta-material analysis are retrieved, virtual simulation is conducted with the experimental data extracted from the papers, and research data are accumulated. ScienceON's tools for supporting ontact research activity will play a role as an important service in the era of digital transformation and open science.

• Corrosion Science and Technology
• /
• 제9권5호
• /
• pp.209-215
• /
• 2010

To elucidate the effect of aging time on resistance to localized corrosion of hyper duplex stainless steel, a double-loop electrochemical potentiokinetic reactivation test a potentiodynamic anodic polarization test, a scanning electron microscope-energy dispersive spectroscope analysis, and a thermodynamic calculation were conducted. With an increase in aging time, sigma phases are precipitated much more than chi phases due to the meta-stable chi phase acting as a transition phase. As aging time at $850^{\circ}C$ increases, the corrosion resistance decreases owing to an increase in Cr, Mo and W depleted areas adjacent to the intermetallic phases such as sigma phases and chi phases.

• Journal of Korean Neurosurgical Society
• /
• 제63권6호
• /
• pp.673-680
• /
• 2020

The demineralized bone matrix (DBM) as the bone graft material to increase the fusion rate was widely used in spinal fusion. The current study aimed to compare the fusion rate of DBM to the fusion rate of autograft in lumbar spine fusion via meta-analysis of published literature. After systematic search, comparative studies were selected according to eligibility criteria. Checklist (risk of bias assessment tool for non-randomized study) was used to evaluate the risk of bias of the included nonrandomized controlled studies. The corresponding 95% confidence interval (95% CI) were calculated. We also used subgroup analysis to analyze the fusion rate of posterolateral lumbar fusion and lumbar interbody fusion. Eight studies were finally included in this meta-analysis. These eight studies included 581 patients. Among them, 337 patients underwent spinal fusion surgery using DBM (DBM group) and 204 patients underwent spinal fusion surgery with mainly autologous bone and without using DBM (control group). There was no significant differences of fusion rate between the two groups in posterolateral fusion analysis (risk ratio [RR], 1.03; 95% CI, 0.90-1.17; p=0.66) and interbody fusion analysis (RR, 1.13; 95% CI, 0.91-1.39; p=0.27). Based on the available evidence, the use of DBM with autograft in posterolateral lumbar spine fusion and lumbar interbody fusion showed a slightly higher fusion rate than that of autograft alone; however, there was no statistically different between two groups.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.160-168
• /
• 2003

Statement of problem : Direct denture reline resins tend to discolor during service in the oral environment by intrinsic and extrinsic factor. Purpose : This study was designed to evaluate the color stability of direct denture reline resins. Material and methods : Mild Rebaron(GC Corp., Japan), Meta Base M(Sun medical Co., Japan), Mild Rebaron LC(GC Corp., Japan) and as a control group, Vertex SC(Dentimex Zeist, Holland) were chosen for this study. Ten specimens of each direct denture reline resins were fabricated. Treatment methods designed for this study were the coffee staining test(7days) and the accelerated aging test(100hours). The color changes before and after treatment were measured by Tristimulous colorimeter(Yasuda seiki seisakusho, Ltd. Japan) and analyzed. Results All the direct denture reline resins subjected to the coffee staining test and the accelerated aging test showed noticible difference in color change. After coffee staining test, Meta Base M showed the highest color change followed by Vertex SC. Mild Rebaron LC and Mild Rebaron. There were no statistical differences between Meta Base M and Vertex SC and between Mild Rebaron LC and Mild Rebaron(p>0.05). After accelerated aging test. Mild Rebaron LC showed the highest color change followed by Vertex SC, Meta Base M and Mild Rebaron. There were no statistical differences only between Mild Rebaron and Mata Base M(p>0.05) but among the others, there were statistical differences(p<0.05). Conclusion : Within the limitation of this study, all the direct denture reline resins subjected to the extrinsic and intrinsic factors showed noticible difference in color change, and there were differences among manufacturers.

• 한국전문물리치료학회지
• /
• 제26권4호
• /
• pp.70-76
• /
• 2019

Background: An excessive pronated foot is defined as a flattening or complete loss of the medial longitudinal arch. Excessive foot pronation is considered to have high risk factors of overuse injuries in the lower limb. Various treatments have been investigated in attempts to control excessive pronation. Objects: This meta-analysis identifies the effects of an anti-pronation taping technique using different materials. Methods: The electronic databases used include MEDLINE, the Physiotherapy Evidence Database (PEDro), Science Direct, the Korean Studies Information Service System (KISS), the Research Information Sharing Service (RISS), the Korea National Library, and the Korean Medical Database (studies published up to July 31, 2019). The database search used the following keywords: "foot drop" OR "foot arch" OR "foot pronation" OR "flat foot (pes planus)" AND "taping" OR "support." Eight eligible studies were analyzed to determine the effectiveness of anti-pronation taping in study and control groups. Results: The overall random effect size (Hedges'g) of the anti-pronation taping technique was 0.147 (95% confidence interval [CI]: -.214 to .509). When the effect (Hedges' g) was compared by the type of tape material, rigid tape (RT; Lowdye taping) was .213 (95% CI: -.278 to .704) and kinesiotape (KT; arch support taping) was -.014 (95% CI: -.270 to .242). Based on this meta-analysis, it was not possible to identify the extent to which anti-pronation taping was effective in preventing navicular drop, improving balance, or changing foot pressure. Only three of the eight eligible studies applied KT on excessive pronated feet, and the outcome measure areas were different to those of the RT studies. The KT studies used EMG data, overall foot posture index (FPI) scores, and rear foot FPI scores. In contrast, the RT studies measured navicular heights, various foot angles, and foot pressure. Conclusion: This review could not find any conclusive evidence about the effectiveness of any taping method for patients with pronated feet. Future studies are needed to develop the anti-pronation taping technique based on the clinical scientific evidence.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.33-43
• /
• 2021

A60 class bulkhead penetration piece is a fire resistance system installed on a bulkhead compartment to protect lives and to prevent flame diffusion in a fire accident on a ship and offshore plant. This study focuses on the approximate optimization of the fire resistance design of the A60 class bulkhead penetration piece using a multi-island genetic algorithm. Transient heat transfer analysis was performed to evaluate the fire resistance design of the A60 class bulkhead penetration piece. For approximate optimization, the bulkhead penetration piece length, diameter, material type, and insulation density were considered discrete design variables; moreover, temperature, cost, and productivity were considered constraint functions. The approximate optimum design problem based on the meta-model was formulated by determining the discrete design variables by minimizing the weight of the A60 class bulkhead penetration piece subject to the constraint functions. The meta-models used for the approximate optimization were the Kriging model, response surface method, and radial basis function-based neural network. The results from the approximate optimization were compared to the actual results of the analysis to determine approximate accuracy. We conclude that the radial basis function-based neural network among the meta-models used in the approximate optimization generates the most accurate optimum design results for the fire resistance design of the A60 class bulkhead penetration piece.