• 제목/요약/키워드: Mesostructure

검색결과 16건 처리시간 0.018초

Effect of Template Existence on the Textural Properties of Iron-based Catalyst for Fischer Tropsch Reaction

  • Sirikulbodee, Papahtsara;Tungkamani, Sabaithip;Phongksorn, Monrudee;Ratana, Tanakorn;Sornchamni, Thana
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제7권2호
    • /
    • pp.96-104
    • /
    • 2015
  • Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

스티렌 산화반응에 대한 V-KIT-6의 촉매특성 고찰 (Catalytic Performance of V-KIT-6 for the Oxidation of Styrene)

  • 김상윤;;;임동옥;김경훈;박대원
    • Korean Chemical Engineering Research
    • /
    • 제47권3호
    • /
    • pp.275-280
    • /
    • 2009
  • 바나듐이 담지된 3차원 입방구조의 V-KIT-6를 Pluronic P123 공중합체를 구조형성제로 사용하고, 부탄올을 보조 계면활성제로 사용하여 TEOS와 $NH_4VO_3$로부터 수열합성법으로 제조하였다. 제조한 V-KIT-6는 좁은 기공분포(~6.0 nm)를 가지고 넓은 비표면적(${\sim}1,000m^2/g$)을 보여주었다. V-KIT-6에서 V의 배위 특성 등은 $^{51}V$ 스핀 공명 NMR과 ESR을 이용하여 분석하였다. 제조된 V-KIT-6는 테트라부틸 하이드로 퍼옥사이드(TBHP)를 산화제로 사용한 스티렌의 직접산화반응에서 우수한 촉매활성을 나타내었다.

Cytohistological study of the leaf structures of Panax ginseng Meyer and Panax quinquefolius L.

  • Lee, Ok Ran;Nguyen, Ngoc Quy;Lee, Kwang Ho;Kim, Young Chang;Seo, Jiho
    • Journal of Ginseng Research
    • /
    • 제41권4호
    • /
    • pp.463-468
    • /
    • 2017
  • Background: Both Panax ginseng Meyer and Panax quinquefolius are obligate shade-loving plants whose natural habitats are broadleaved forests of Eastern Asia and North America. Panax species are easily damaged by photoinhibition when they are exposed to high temperatures or insufficient shade. In this study, a cytohistological study of the leaf structures of two of the most well-known Panax species was performed to better understand the physiological processes that limit photosynthesis. Methods: Leaves of ginseng plants grown in soil and hydroponic culture were sectioned for analysis. Leaf structures of both Panax species were observed using a light microscope, scanning electron microscope, and transmission electron microscope. Results: The mesostructure of both P. ginseng and P. quinquefolius frequently had one layer of non-cylindrical palisade cells and three or four layers of spongy parenchymal cells. P. quinquefolius contained a similar number of stomata in the abaxial leaf surface but more tightly appressed enlarged grana stacks than P. ginseng contained. The adaxial surface of the epidermis in P. quinquefolius showed cuticle ridges with a pattern similar to that of P. ginseng. Conclusion: The anatomical leaf structure of both P. ginseng and P. quinquefolius shows that they are typical shade-loving sciophytes. Slight differences in chloroplast structure suggests that the two different species can be authenticated using transmission electron microscopy images, and light-resistant cultivar breeding can be performed via controlling photosynthesis efficiency.

A numerical method for estimating the elastic modulus of recycled concrete

  • Zhou, Xinzhu;Zheng, Jianjun;Chen, Ting;Zhang, Jian;Wang, Chuanyang;Wu, Jiefeng
    • Computers and Concrete
    • /
    • 제23권3호
    • /
    • pp.161-170
    • /
    • 2019
  • This paper aims at presenting a numerical method for estimating the elastic modulus of recycled concrete with crushed aggregates. In the method, polygonal aggregates following a given sieve curve are generated, and placed into a square simulation element with the aid of the periodic boundary condition and the overlap criterion of two polygonal aggregates. The mesostructure of recycled concrete is reconstructed by embedding an old interfacial transition zone (ITZ) layer inside each recycled aggregate and by coating all the aggregates with a new ITZ layer. The square simulation element is discretized into a regular grid and a representative point is selected from each sub-element. The iterative method is combined with the fast Fourier transform to evaluate the elastic modulus of recycled concrete. After the validity of the numerical method is verified with experimental results, a sensitivity analysis is conducted to evaluate the effects of key factors on the elastic modulus of recycled concrete. Numerical results show that the elastic modulus of recycled concrete increases with the increase of the total aggregate content and the elastic moduli of old and new ITZ but decreases with increasing the replacement ratio of recycled aggregate and the thicknesses of old and new ITZ. It is also shown that, for a replacement ratio of recycled aggregate smaller than 0.3, the elastic modulus of recycled concrete is reduced by no more than 10%.

광화학적 가스 센싱을 위한 광변색 스피로피란 개질된 유기-무기 하이브리드 메조포러스 실리카 (Photochromic Spiropyran-Functionalized Organic-Inorganic Hybrid Mesoporous Silica for Optochemical Gas Sensing)

  • 박성수;하창식
    • 접착 및 계면
    • /
    • 제17권4호
    • /
    • pp.141-148
    • /
    • 2016
  • 본 연구에서는 트리블럭 공중합체($PEO_{20}PPO_{70}PEO_{20}$, P123)를 주형으로 사용하고 테트라에틸오르소실리케이트(Tetraethyl orthosilicate, TEOS)를 실리카원으로 사용하여 산 조건 하에서 자기조립 과정을 거친 후 메조포러스 실리카(SBA-15)를 합성하였다. SBA-15는 높은 표면적($704m^2g^{-1}$), 균일한 나노세공(8.4 nm) 그리고 잘 배열된 육방체 구조를 가진다. 스피로피란(Spiropyran) 기가 개질된 SBA-15 (Spiropyran-SBA-15)는 3-(트리에톡시실릴)프로필 이소시아네이트(TESPI)와1-(2-하이드록시에틸)-3,3-이메틸인돌리노-6'-니트로벤조프릴로스피렌(HDINS)을 이용하여 SBA-15에 후처리하여 합성하였다. Spiropyran-SBA-15는 개질 후 나노세공 구조의 손상없이 잘 배열된 육방체 구조를 가졌다. 그리고 표면적과 세공 크기는 각각 $651m^2g^{-1}$와 8.0 nm이었다. 그리고 다양한 화학 기체(EtOH, THF, $CHCl_3$, Acetone, HCl)를 이용하여 Spiropyran-SBA-15의 광화학적 특성을 연구하였다. 유기분자 기체들(EtOH, THF, $CHCl_3$, Acetone)에 대한 광 형광 스펙트라의 주요 발광 피크는 603.4 nm부터 592.1 nm까지 blue shift하였다. 피크 세기는 0.8부터 0.3까지 감소하였다. Spiropyran-SBA-15시료를 HCl 기체에 노출한 후 측정한 광 형광 스펙트럼은 현저한 blue shift를 보여주었다. 광 형광 스펙트럼은 592.1 nm까지 이동하였다. 또한, 광 형광 스펙트럼의 정규화된 피크 세기는 0.1까지 감소하였다.

Stochastic investigation on three-dimensional diffusion of chloride ions in concrete

  • Ye Tian;Yifei Zhu;Guoyi Zhang;Zhonggou Chen;Huiping Feng;Nanguo Jin;Xianyu Jin;Hongxiao Wu;Yinzhe Shao;Yu Liu;Dongming Yan;Zheng Zhou;Shenshan Wang;Zhiqiang Zhang
    • Computers and Concrete
    • /
    • 제32권3호
    • /
    • pp.247-261
    • /
    • 2023
  • Due to the non-uniform distribution of meso-structure, the diffusion of chloride ions in concrete show the characteristics of characteristics of randomness and fuzziness, which leads to the non-uniform distribution of chloride ions and the non-uniform corrosion of steel rebar in concrete. This phenomenon is supposed as the main reason causing the uncertainty of the bearing capacity deterioration of reinforced concrete structures. In order to analyze and predict the durability of reinforced concrete structures under chloride environment, the random features of chloride ions transport in concrete were studied in this research from in situ meso-structure of concrete. Based on X-ray CT technology, the spatial distribution of coarse aggregates and pores were recognized and extracted from a cylinder concrete specimen. In considering the influence of ITZ, the in situ mesostructure of concrete specimen was reconstructed to conduct a numerical simulation on the diffusion of chloride ions in concrete, which was verified through electronic microprobe technology. Then a stochastic study was performed to investigate the distribution of chloride ions concentration in space and time. The research indicates that the influence of coarse aggregate on chloride ions diffusion is the synthetic action of tortuosity and ITZ effect. The spatial distribution of coarse aggregates and pores is the main reason leading to the non-uniform distribution of chloride ions both in spatial and time scale. The chloride ions concentration under a certain time and the time under a certain concentration both satisfy the Lognormal distribution, which are accepted by Kolmogorov-Smirnov test and Chi-square test. This research provides an efficient method for obtain mass stochastic data from limited but representative samples, which lays a solid foundation for the investigation on the service properties of reinforced concrete structures.