• 제목/요약/키워드: Mesoporous material

검색결과 121건 처리시간 0.035초

HMCM-41 촉매에서 2,3-Dihydrobenzofuran 유도체의 합성 (Synthesis of 2,3-Dihydrobenzofuran Derivatives over HMCM-41 Catalysts)

  • 김형진;서곤;김정년;최경호
    • Korean Chemical Engineering Research
    • /
    • 제43권6호
    • /
    • pp.662-667
    • /
    • 2005
  • HMCM-41 중간세공 물질(mesoporous material) 촉매를 사용하여 aryl methallyl ether로부터 의약품과 농약의 주요 중간체인 2,3-dihydrobenzofuran 유도체를 합성하였다. 산점 농도가 촉매 활성에 미치는 영향을 비교하기 위하여 Si/Al 몰비가 40과 50으로 다른 촉매를 제조하였으며, aryl methallyl ether에 다양한 치환기를 도입하여 벤젠 고리의 전자 밀도가 전환율과 수율에 미치는 효과를 조사하였다. 산점이 많아질수록 전환율은 높아졌으나, 2,3-dihydorbenzofuran 유도체의 수율과 직접 연관짓기는 어려웠다. 전자공여기의 치환으로 벤젠 고리의 전자 밀도가 높아지면 claisen 자리 옮김 반응이 빨라져서 2,3-dihydrobenzofuran 유도체가 많이 생성되었다. 반면, 전자흡인기가 치환되어 벤젠 고리의 전자 밀도가 낮아지면 산 촉매에 의해 aryl methallyl ether 분해 반응이 촉진되어 2,3-dihydrobenzofuran 유도체 대신 phenol 유도체가 생성되었다.

EDLC 전극용 메조기공 활성탄소 섬유의 전기화학적 특성 (The Electrochemical Characteristics of Mesopore Active Carbon Fiber for EDLC Electrode)

  • 강채연;신윤성;이종대
    • Korean Chemical Engineering Research
    • /
    • 제49권1호
    • /
    • pp.10-14
    • /
    • 2011
  • 철 이온 교환방법에 의해 메조기공을 갖는 활성탄소 섬유(ACF)를 제조하고, 이를 사용하여 전기 이중층 커패시터(EDLC)의 전극소재 성능을 조사하였다. 질산처리에 의해 제조된 메조기공 ACF는 비표면적이 1,249, 664 $m^2/g$이고, 메조 기공 분율이 70.6-81.3%이고, 평균 기공크기는 약 2.78~4.14 nm이다. 질산처리시간이 짧을수록 비표면적이 크고 메조 기공이 적게 발달됨을 알 수 있었다. 전기이중층 커패시터의 성능을 조사하기 위해서, 메조기공 ACF, 도전제, 바인더를 사용하여 단위 셀을 제조하였으며, 유기 전해질을 사용하였다. 2시간 질산으로 처리된 ACF의 비 축전양은 0.47 $F/cm^2$이고, 20회 충.방전 테스트에서 안정된 실험결과를 얻을 수 있었다. EDLC의 전기화학적 성능은 ACF 전극의 비표면적에 크게 영향을 받으며 메조기공은 전하의 확산저항을 감소시키는 것을 알 수 있었다.

MEA (monoethanolamine) 함침 메조포러스 물질을 이용한 CO2 회수 (CO2 Removal using MEA (monoethanolamine) Impregnated Mesoporous Materials)

  • 박예원;백일현;박상도;이재욱;박소진
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.573-581
    • /
    • 2007
  • 본 연구에서는 MEA(monoethanolamine)를 함침한 메조포러스 물질을 이용하여 이산화탄소를 회수하고자 하였다. 이를 위해 MCM-41, MCM-48 및 SBA-15의 메조포러스 물질을 제조한 후 30, 50, 70 wt%의 MEA로 함침하였다. 함침한 메조포러스 물질의 특성을 평가하기 위하여 XRD, FT-IR, SEM, BET를 이용하였다. 이산화탄소 흡탈착 실험을 수행한 결과, 흡착량은 MCM-41>MCM-48>SBA-15 순으로 나타내었다. 최대 이산화탄소 흡착량은 50 wt% MEA 함침 MCM-41으로써 $40^{\circ}C$에서 $57.1mg-CO_2/gr-sorbent$이며, 이는 MCM-41과 비교할 때 8배 높았다. 그리고 20회 반복 흡탈착 실험 결과, 반복 실험에도 일정한 흡착능을 나타내었다.

Antibacterial mesoporous Sr-doped hydroxyapatite nanorods synthesis for biomedical applications

  • Gopalu Karunakaran;Eun-Bum Cho;Keerthanaa Thirumurugan;Govindan Suresh Kumar;Evgeny Kolesnikov;Selvakumar Boobalan
    • Advances in nano research
    • /
    • 제14권6호
    • /
    • pp.507-519
    • /
    • 2023
  • Postsurgical infections are caused by implant-related pathogenic microorganisms that lead to graft rejection. Hence, an intrinsically antibacterial material is required to produce a biocompatible biomaterial with osteogenic properties that could address this major issue. Hence, this current research aims to make strontium-doped hydroxyapatite nanorods (SrHANRs) via an ethylene diamine tetraacetic acid (EDTA)-enable microwave mediated method using Anodontia alba seashells for biomedical applications. This investigation also perceives that EDTA acts as a soft template to accomplish Sr-doping and mesoporous structures in pure hydroxyapatite nanorods (HANRs). The X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis reveals the crystalline and mesoporous structures, and Brunauer-Emmett-Teller (BET) indicates the surface area of all the samples, including pure HANRs and doped HANRs. In addition, the biocidal ability was tested using various implant-related infectious bacteria pathogens, and it was discovered that Sr-doped HANRs have excellent biocidal properties. Furthermore, toxicity evaluation using zebrafish reports the non-toxic nature of the produced HANRs. Incorporating Sr2+ ions into the HAp lattice would enhance biocompatibility, biocidal activity, and osteoconductive properties. As a result, the biocompatible HANRs materials synthesized with Sr-dopants may be effective in bone regeneration and antibacterial in-built implant applications.

층상이중 수산화물을 이용한 5가 비소 흡착 특성 (Adsorption of Arsenate on the Synthesized Layered Double Hydroxide Materials)

  • 최영무;최원호;김정환;박주양
    • 대한토목학회논문집
    • /
    • 제29권1B호
    • /
    • pp.91-96
    • /
    • 2009
  • LDH(Layered double hydroxide) 물질을 제조하고 이를 이용하여 비소를 흡착시키는 실험을 수행하였다. TEM을 이용하여 제조한 LDH 물질의 형상을 살펴본 결과 열처리를 거친 시료는 나노크기의 결정화된 구조를 가지고 있고 열처리를 거치지 않은 시료는 아직 결정화가 완전히 이루어지지 않았으며 크기도 마이크로 범위에서 나타났다. X선 회절분석 결과를 보면 이 같은 결과가 뚜렷이 나타났으며, 열처리를 거친 경우는 뚜렷한 결정화를 보이고 있었다. $N_2$ 흡착 및 탈착 결과를 통해 LDH가 mesoporous한 공극 형태를 가지고 있다는 것을 알 수 있었다. 비표면적은 열처리를 거친 시료가 열처리를 거치지 않은 시료보다 2배 이상 크게 나타났다. 흡착 등온 실험 결과에서도 두 시료는 비슷한 흡착량을 보이며 기존 철산화 물에 못지않은 흡착능을 나타내고 있다. 금번에 합성한 Mg Fe-LDH 물질을 이용하여 토양 및 지하수의 비소 제거 공정에 적용할 수 있음을 확인하였다.

OMC Nano-emulsion을 포집하고 있는 Nano-TiO$_2$-Paste의 합성과 화장품의 응용 (Inorganic-organic nano-hybrid; Preparation of Nano-sized TiO$_2$ Paste Trapped OMC Nano-emulsion and it's Application for Cosmetics)

  • Byung Gyu, Park;Jong Heon, Kim;Jin Hee, Im;Kyoung Chul, Lee
    • 대한화장품학회지
    • /
    • 제30권2호
    • /
    • pp.181-187
    • /
    • 2004
  • 화장품에서 유기 화합물인 OMC(octyl methoxy cinnamate)와 무기 소재인 TiO$_2$가 자외선 차단제로 가장 보편적으로 사용되고 있다. 그러나 OMC는 skin trouble이 있고, TiO$_2$는 첨가량에 비해서 자외선 차단 효율이 OMC보다 낮고 입자의 크기효과에 의해 백탁 현상이 나타나는 단점이 있다. 본 연구에서는 이러한 두 성분이 갖는 단점을 보완하는 방법으로 OMC를 나노에멀젼시키고, 이 나노에멀젼-OMC를 나노-TiO$_2$ 미립자로 포접하여 자외선 차단효과를 극대화 하면서, 피부에 OMC가 직접적으로 적용하지 못하도록 하는 방법을 연구하였다. 특히 계면활성제를 boundary로 하는 유기/무기 hybrid nano-material에서 TiO$_2$ 미립자와 OMC-에멀젼이 나노 크기가 되면 백탁 현상이 나타나지 않는 투명한 화장품을 제조할 수 있을 뿐만 아니라 나노-에멀젼 OMC를 TiO$_2$로 포집하는 과정에서 hydrophilic character를 갖는 레시친으로 TiO$_2$를 안정화하여 보습성을 더욱 향상시켰다. 합성한 inorganic-organic hybrid nano-material는 TEM을 이용하여 나노 미립자의 morphologies를 규명하였고, UV-Visible spectrometer를 이용하여 자외선 흡수를 측정하였다. 또한 X-ray diffractometer를 이용하여 나노-에멀젼 OMC를 포집하고 있는 TiO$_2$ 미립자가 갖는 특성인 pore의 크기와 구조를 측정하였다. 화장품적인 응용으로서 SPF analyzer 측정결과 기존의 powder-OMC에 비하여 우수한 자외선 차단 효과를 나타내었으며, OMC의 피부 침투도 훨씬 줄일 수 있어 OMC의 피부 부작용을 크게 줄일 수 있을 것이다.>$\pm$0.06 $\mu$g/g 범위였다. 4. 날결명자 분말첨가군 각 조직에 축적된 카드뮴 함량이 제일 낮았던 C4를 Cl과 비교한 결과 뇌, 심장, 비장, 간, 폐, 고환, 신장, 대퇴부근육, 다리뼈에 각각 49.03, 22.56, 36.02, 35.75, 41.75, 36.20, 37.00, 22.77, 56.67 %의 감소를 보였으며, 각 장기의 함량은 뇌<다리뼈<대퇴부 근육<고환<폐<심장<비장<신장<간 순 이었다. 5. 카드뮴 총 섭취량으로 장기 및 조직의 카드뮴 평균함량에 대한 축적율은 카드뮴만 섭취한 군(Cl) 의 경우 7.14%이었으며, 결명자 분말 첨가군인 C2, C3, C4군의 경우 각각 4.91, 4.81, 4.50 %이었다. 6. 체모의 카드뮴 함량은 Cl군이 가장 높았고, 결명자 첨가군들의 카드뮴 함량은 6주째까지 모든 시험군에서 증가하는 경향을 보였으며, 6주 이후에는 감소되는 경향을 보였다. 7. 분변 중 카드뮴 함량은 C4군이 가장 높았고, 결명자 첨가군들의 카드뮴 함량은 C3군과 C4군을 제외한 나머지 군들에서 완만하게 증가하는 경향을 보였으며, 6주째에 카드뮴 함량이 감소되는 경향을 보였다가 6주 이후에 다시 카드뮴 함량이 증가하는 경향이었다.erefore the guidelines for iron supplementation and nutritional education to improve their iron status should be provided.한 질소제거를 N-balance로부터 구해보면, R3 반응조의 경우가 가장 높은 제거율(40.9%)을 보였다. 이상의 결과들을 볼 때, Bncillus 균주는 호기적 탈질을 일으킬 수 있는 가능성이 있고, Bncillus 균주를 이용한 B3 공정은 탈질에 이용되는 탄소량이 거의 없고, 적은 alkalinity 소모에 의한 경제적 이익 등 장점을 가진 공정으로 보여 진다.수록 푹신한 감이 있는

스핀코팅법에 의해 제조되어진 나노다공질 TiO2 전극막을 이용한 염료감응형 태양전지 (Dye-sensitized Solar Cells with Mesoporous TiO2 Film Manufactured by Spin Coating Methode)

  • 구보근;이동윤;이원재;김현주;송재성
    • 한국전기전자재료학회논문지
    • /
    • 제17권9호
    • /
    • pp.1001-1005
    • /
    • 2004
  • Rye-sensitized solar cell (DSSC) is a new class of solar cell, which consists of nanoporous TiO$_2$ electrode, dye-sensitizer, electrolyte, and counter electrode. Such cell is operated in sunlight via the principle of photosynthetic electrochemistry. In order to obtain the good dispersion of nano size TiO$_2$ particles In slurry, the pH of solvent, the sort and quantify of solvent additive and the quantity of surfactant were adjusted. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute HNO$_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO$_2$ film using the dilute HNO$_3$ solvent of pH 2 with the addition of ethylene glycol and neutral surfactant. DSSC was assembled with TiO$_2$ electrode and Pt electrode, and its photoelectric property was measured using the monochromatic wavelength in the rangee of 350∼700 nm.

Porous Silica Particles As Chromatographic Separation Media: A Review

  • Cheong, Won Jo
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권12호
    • /
    • pp.3465-3474
    • /
    • 2014
  • Porous silica particles are the most prevailing raw material for stationary phases of liquid chromatography. During a long period of time, various methodologies for production of porous silica particles have been proposed, such as crashing and sieving of xerogel, traditional dry or wet process preparation of conventional spherical particles, preparation of hierarchical mesoporous particles by template-mediated pore formation, repeated formation of a thin layer of porous silica upon nonporous silica core (core-shell particles), and formation of specific silica monolith followed by grinding and calcination. Recent developments and applications of useful porous silica particles will be covered in this review. Discussion on sub-$3{\mu}m$ silica particles including nonporous silica particles, carbon or metal oxide clad silica particles, and molecularly imprinted silica particles, will also be included. Next, the individual preparation methods and their feasibilities will be collectively and critically compared and evaluated, being followed by conclusive remarks and future perspectives.

산소환원반응을 위한 니켈-텅스텐 카바이드 나노입자 담지 메조포러스 카본 촉매의 단일 합성 및 그 특성 평가 (One-pot Synthesis of Nickel and Tungsten Carbide Nanoparticles Supported Mesoporous Carbon Electrocatalyst for Oxygen Reduction Reaction)

  • 김혜민
    • 한국표면공학회지
    • /
    • 제51권3호
    • /
    • pp.179-184
    • /
    • 2018
  • In this study, Ni and tungsten carbide (WC) nanoparticles are simultaneously synthesized with the mesoporous carbon nanoparticles (CNP) using a solution plasma processing (SPP) in the benzene. The Ni and WC nanoparticles were formed through the sputtering effect of electrodes during discharge, and mean time CNP were formed through reduction reaction. TEM observation showed that loaded Ni and WC nanoparticles were evenly dispersed on the CNP. The results of electrochemical analysis demonstrated that an introduction of Ni nanoparticles promoted to improve catalytic activity for oxygen reduction reaction (ORR). Moreover, Ni-WC/CNP lead to fast electron transfer process compared to that of WC/CNP. Therefore, the inexpensive Ni-WC/CNP might be a promising as catalytic material for cathodes in fuel cell applications.

메조포러스 분자체에 담지된 Pt/Pd 촉매상에서 납사분해 잔사유의 방향족 화합물 수소화 특성 (Hydrogenation Characteristics of Aromatics in Residue Oil of Naphtha Cracking on Pt/Pd Impregnated Mesoporous Molecular Sieve)

  • 최종화;정순용;오성근
    • Korean Chemical Engineering Research
    • /
    • 제43권6호
    • /
    • pp.675-682
    • /
    • 2005
  • 불화실리콘산($H_2SiF_6$)과 질산알루미늄의 혼합 수용액을 주형으로 사용되는 $C_{16}TMABr$(cethyltrimethylaminonium bromide)용액에 첨가하여 불화실리콘산의 hydrolysis 반응에 의해서 메조포러스 분자체(Al-MMS)를 합성하였다. 합성된 분자체를 분석한 결과 비표면적이 $981m^2/g$이고, 기공 크기가 $39{\AA}$ 부근에서 균일함을 보이는 메조포러스 분자체가 합성되었으며, $NH_3$-TPD 결과 산의 세기가 크지 않음을 알 수 있었다. 합성된 담체가 납사분해 잔사유에 포함되어 있는 방향족 화합물의 수소화 반응에 대한 촉매 담체로써 적용 가능한가를 조사하기 위해서 Pt 및 Pd의 금속 성분을 담지시킨 후, 납사 분해 잔사유에 많이 포함되어 있는 방향족 화합물인 나프탈렌을 모델화합물로 정하고 나프탈렌의 수소화 반응에 대한 온도별 전환율, 반응속도 상수, 활성화 에너지를 조사하였다. 또한, 다른 메조포러스 담체와 상용담체를 이용하여 촉매를 제조한 후 같은 방법으로 비교하였다. 그 결과 PtPd/Al-MMS 촉매가 우수한 탈방향족 활성과 황저항성을 나타내었으며, 다른 메조포러스 담체 및 상용 담체와 비교한 결과 활성이 우수하게 나타났다. 실제 납사분해 잔사유의 일종인 PGO(pyrolized gas oil)를 원료로 실험해 본 결과 활성이 우수하게 나타났으며 Pd/Al-MMS 촉매는 납사분해 잔사유에 포함된 방향족 화합물의 수소화 촉매로써 응용 가능성을 보였다.