• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.13-20
• /
• 1988

The hydration characteristics of four naked baley varieties by different kernel sizes were investigated. The predominant kernel size was 7 mesh, followed by 10 mesh kernel, of which comprised $86{\sim}94%$ of the total kernel. Diffusion coefficients of naked barleys at $40^{\circ}C$ increased as the kernel sizes decreased. The volume increases of naked barleys were linearly related to the moisture gain, regardless variety and kernel size.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.4
• /
• pp.928-936
• /
• 2013

This thesis is the fundamental study on the adaptation of escape device for reducing small fishes in set-net. The escape devices for experiments were made the mesh-type devices with three different mesh sizes (60.6, 75.8 and 120.0mm). The experiments of size selectivity on escape devices were conducted by using two kinds of species as black rockfish (Sebastes schlegeli) and sea perch (Lateolabrax maculatusi) in the experimental tank. The size selectivity curve was fitted by using a logistic function and the parameters of selectivity curve were estimated by a maximum likelihood method. In the results; 50% selection ranges for the mesh-type escape devices with three different mesh sizes were; a black rockfish was 18.99 in mesh size 60.6mm and 21.96 in mesh size 75.8mm (120mm could not estimate). A sea perch was 22.02 in mesh 60.6mm and 24.46 in mesh size 75.8mm (120mm could not estimate). The 50% selection range of a black rockfish was wilder than a sea perch about 1.1~.2 time. Therefore, the small fishes are able to reduce by using the mesh type escape device. However, the optimum mesh size should be decided to consider the size of target species and economics of catches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.4
• /
• pp.247-259
• /
• 1993

The fishing experiment was carried out by the training ship Saebada in order to analyse the mesh selectivity for trawl cod-end, in the Southern Korea Sea and the East China Sea from June. 1991 through August, 1992. The trawl cod-end used in this experiment has the trouser type of cod-end with cover net. and the mesh selectivity was examined for the five kinds of the opening of mesh in its cod-end part. A total of 163 hauls, of which having mesh size 51.2mm ; A 89, 70.2mm ; B 54, 77.6mm ; C 55, 88.0mm ; D 52 and 111.3mm ; E 20 were used respectively. Selection curves and selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b)) ). The mesh election master curves were estimated by S=1/(1+exp super(-[a(L/M)+$\beta$]) ). and the optimum mesh size were calculated with (L/M) sub(50) of master curve. In these cases 'a' and '$\alpha$' are slope, 'b' and '$\beta$' are intercept. 'L' is body length of the target species of fishes, 'M' is the mesh size, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and the results obtained are summarized as follows: 1. Red seabream Pagrus major(Temminct et Schlegel) and yellow porgy Dentex tumifrons(Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 97.5%, 91.4%, 76.7% and 57.8% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 2.65 and -28.62, 4.40 and -77.73, 2.31 and -46.99, and their selection factors were 1.39, 2.10, 1.83 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.05 and -5.65 respectively, and (L/M) sub(50) was 1.85. The optimum mesh size of Red seabream was 141mm. 2. Filefish Thamnaconus modestus (Gunther) ; Selection rate in each mesh size of A, B, C, D and E were 99.6%, 98.3%, 91.2%, 80.0% and 48.6% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 5.82 and -55.10, 2.92 and -36.90, 3.91 and -63.09, and their selection factors were 1.35, 1.44, 1.45 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.02 and -4.32 respectively, and (L/M) sub(50) was 1.43. The optimum mesh size was 129mm. 3. Target dory Zeus faber Valenciennes ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 100%, 83.2%, 91.6% and 65.0% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 3.85 and -32.46, 4.19 and -57.38, 2.45 and -40.03, and their selection factors were 1.09, 1.56, 1.47 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 2.64 and -3.53 respectively, and (L/M) sub(50) was 1.34. The optimum mesh size was 127mm. 4. Butterfish Psenopsis anomala (Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.2%, 34.1%, 46.5%, 14.3% and 2.4% respectively. Selection parameters 'a' and 'b' of mesh sizes B, C and D were 5.35 and -71.70, 5.07 and -69.25, 3.31 and -62.06 and their selection factors were 1.91, 1.75, 2.13 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.16 and -6.24 respectively, and (L/M) sub(50) was 1.98. The optimum mesh size was 71mm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.11-16
• /
• 1972

During the period from 1966 to 1968, total catches of Spanish mackerel averaged 6,000 to 7,000M/T per annual in Korea, and approximately 70 per cent of this amount was captured by drift nets. In an effort to improve the efficiency of drift nets, some experiments were conducted in 1969 to investigate the selectivity of material and mesh sizes. Seven different mesh sizes (80,85,95,100,105,110 and 115 mm) of both multi- and mono-filament netting were used, and the following results were obtained : 1, The body weight of Spanish mackerel taken with the seven different mesh sizes ranges from 0.5kg to 2.9kg, and the mode of body weight consists of three groups, 1kg ($21%$), 1.3kg($15\%$) and 1.5kg($19\%$). 2. For multi-filament net, 80 to 105mm mesh sizes were suitable to catch those three groups, and a little smalter than these for mono-filament net. 3. For Spanish mackerel only, the mono-filament material proved to have 1.5 times better selectivity than multi-filament : however, the latter proved superior for miscellaneous fish species due to its different size and shape. 4. Multi-filament net showed better selectivity for smaller species than mono-filament. (and mono-filament in general indicated opposite phenomenon.)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.1-17
• /
• 2013

The investigation for species composition and catch in the Korean deep-water of the East Sea (also known as Sea of Japan) was carried out with trammel nets of 7 mesh sizes (6.1~24.2cm) offshore Donghae (2006) and Yangyang (2007) of Korea. The catches were 1,268kg and composed of 37 species between 200m and 1,200m in depth. The principal species caught were Taknka's snailfish, salmon snailfish, red snow crab, hunchback sculpin, snow crab, spinyhead sculpin, Tanaka's eelpout, Alaska cod and so on. Those were target fish for commercial value except salmon snailfish. The mesh sizes for the largest catch were 10.6cm and 15.2cm in the fishing ground of Donghae and Yangyang, respectively. The habitat of snow crab was shallower than that of red snow crab in both areas. Trammel net enabled to investigate fish in deep-water with small fishing vessel and rather cheap expenses in contrast to bottom trawl that required too much of it. With increasing inner mesh size of trammel net the mean size of some principal species such as Taknka's snailfish, spinyhead sculpin, hunchback sculpin, Pacific cod, snow crab, red snow crab and hybrid between snow crab and red snow crab tended to be large in certain range of mesh size.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.1
• /
• pp.78-82
• /
• 2009

We describe a catch experiment and the size selectivity of gill nets for male Japanese sandfish (Arctoscopus japonicus) caught near Gosung, Korea. The experiment, which was conducted between October and December 2007, examined six different mesh sizes: 36.4, 39.4, 45.5, 51.5, 53.0, and 57.6 mm. The catch was mostly Japanese sandfish (91.3%) and some others (8.7%). More male Japanese sandfish were caught with smaller mesh sizes and more females with larger mesh sizes. Relationships between the weight and fork length of the male and female Japanese sandfish were obtained. The relationship between the catch (Y) and mesh size of the gill net (X) was $Y=0.1773X^3-5.3753X^2+40.042X+26.846$ ($R^2=0.99$). The selection curve for male Japanese sandfish caught in the experiment was fit, via Kitahara's method, to a polynomial equation, which was $s(R={\exp}\{(-2.1391\;R^3+24.294\;R^2-88.289\;R+105.5)-5.180\}$, where R=l/m, and l and m are the fork length and mesh size, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1703-1711
• /
• 2003

An elastic-plastic finite element analysis is performed to investigate detailed closure behaviour of fatigue cracks in residual stress fields and the numerical results are compared with experimental results. The finite element analysis performed under plane stress using contact elements can predict fatigue crack closure behaviour. The mesh of constant element size along crack surface can not predict the opening level of fatigue crack. Specially, the mesh of element sizes depending upon the reversed plastic zone size included the effect of crack opening point can precisely predict the opening level. By using the concept of the mesh of element sizes depending upon the reversed plastic zone size included the effect of crack opening point, the opening level of fatigue crack can be determined very well.

• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.547-557
• /
• 2020

In this paper, an automatic adaptive mesh refinement procedure is presented for two-dimensional problems on the basis of a new probabilistic error estimator. First-order perturbation theory is employed to determine the lower and upper bounds of the structural displacements and stresses considering uncertainties in geometric sizes, material properties and loading conditions. A new probabilistic error estimator is proposed to reduce the mesh dependency of the responses dispersion. The suggested error estimator neglects the refinement at the critical points with stress concentration. Therefore, the proposed strategy is combined with the classic adaptive mesh refinement to achieve an optimal mesh refined properly in regions with either high gradients or high dispersion of the responses. Several numerical examples are illustrated to demonstrate the efficiency, accuracy and robustness of the proposed computational algorithm and the results are compared with the classic adaptive mesh refinement strategy described in the literature.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.2
• /
• pp.99-109
• /
• 2023

In this study, a comparative test operation was conducted through the alternate haul method to examine the selectivity of the four mesh sizes (60 mm, 90 mm, 110 mm, and 130 mm) of the trawl codend. The selectivity was analyzed using the SELECT model considering the fishing efficiency (split parameter) of each fishing gear in the comparative test fishing operation in the trawl and the maximum likelihood method for parameter estimation. A selectivity master curve was estimated for several mesh sizes using the extended-SELECT model. As a result of analyzing the selectivity for silver croaker based on the results of three times hauls for each experimental gear, it was found that the size of the fish caught increased as the size of the mesh size increased. When the selectivity for each mesh size analyzed by the SELECT model considering the split ratio was evaluated based on the size of the AIC value, the estimated split model was superior to the equal split model. Based on the master curve, the 50% selection length value was 2.893, which was estimated to be 136 mm based on the mesh size of 60 mm. In some selectivity models, there was a large deviance between observed and theoretical values due to the non-uniformity of the distribution of fished length classes. As a result, it is considered that appropriate sea trials and selectivity evaluation methods with high reliability should be applied to present trawl fishery resource management methods.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.290-299
• /
• 2011

Field tests were carried out with five different mesh sizes (86.6, 101.0, 121.2, 137.7, 151.5mm) to study the relative efficiency of monofilament and multifilament gill net for Marbled sole, Pleuronectes yokohamae, in the western sea of Korea, 2007-2009. The relative efficiency was analyzed by length distribution, catch in number, catch in weight and weight per individual for Marbled sole. Statistical T-test was done to verify the efficiency between two gears. In the field tests, the total body length range, catch in number and weight of Marbled sole was 15.8-48.2cm, 728 and 254,939g, respectively. During the field tests, Marbled sole less than 15cm length which is prohibition size of fishing was not caught, but the caught number of Marbled sole less than 19.5cm length which is first maturity length was 13 (1.8%) and the caught number of Marbled sole more than 19.5cm was 715 (98.2%). Catches of monofilament gill net was average 1.4 times more efficient than multifilament gill net. The weight per individual and total length by mesh sizes in the two gears tended to gradually increase according to mesh size increasing. But there was little difference of weight per individual and total length by mesh sizes between two gears.