• Wind and Structures
• /
• 제14권5호
• /
• pp.435-447
• /
• 2011

A Computational Fluid Dynamics model is presented in this study for the simulation of the complex fluid flows with free surfaces inside the Tuned Liquid Column Dampers in horizontal motion. The characteristics of the fluid model of the TLCD in horizontal motion include the free surface of the multiphase flow and the horizontal moving frame. In this study, the time depend unsteady Standard ${\kappa}-{\varepsilon}$ turbulent model based on Navier-Stokes equations is chosen. The volume of fluid (VOF) method and sliding mesh technique are adopted to track the free surface of water inside the vertical columns of TLCD and treat the moving boundary of the walls of TLCD in horizontal motion. Several model solution parameters comprising different time steps, mesh sizes, convergence criteria and discretization schemes are examined to establish model parametric independency results. The simulation results are compared with the experimental data in the dimensionless amplitude of the water column in four different configured groups of TLCDs with four different orifice areas. The predicted natural frequencies and the head loss coefficient of TLCDs from CFD model are also compared with the experimental data. The predicted numerical results agree well with the available experimental data.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.82-84
• /
• 2005

Fatigue assessment of welded structure is very sensitive to the method of local stress determination. Normally, hot spot stress which is surface stress extracted from 0.5t, 1.5t away from weld toe is widely used to obtain local stress. However, this method has a lot of limitation in the evaluation of fatigue strength. Therefore, mesh has to comply with strict requirements since stress extracted from this method strongly rely on mesh size and element types. And that method does not cover the stress gradient through thickness direction since only surface stress is considered. Recently, new method to obtain local stress is proposed, which is structural stress. This method has an advantage, which is mesh intransitiveness and covering the effect of both bending and axial stress in local area. In this paper, fatigue test data for various welded joints was analyzed to review the reliability of structural stress. As a result, it is verified that S-N curve using structural stress guaranteed single master curve for various joint type and testing condition.

• 전기화학회지
• /
• 제13권4호
• /
• pp.256-263
• /
• 2010

본 연구에서는 고체산화물 연료전지의 공기극 집전체로 사용되고 있는 고가의 Ag 소재를 대체하고자 전도성 세라믹이 코팅된 mesh 형태의 Crofer 22 APU 집전체를 개발하였다. 고전자전도성의 $(La_{0.80}Sr_{0.20})_{0.98}MnO_3$ (LSM)을 습식 스프레이법으로 코팅하여 고온 산화 및 전기적 특성의 열화를 억제하고자 하였다. $800^{\circ}C$의 산화 실험 결과에 의하면 LSM이 코팅된 Crofer mesh의 면저항(area-specific resistance)은 mesh의 제작에 사용된 와이어 지름과 접촉 부위의 형상등 실제 접촉점의 수 및 면적을 좌우하는 mesh의 특성에 의해 좌우되었다. 또한 LSM 코팅 후 $H_2/N_2$ 분위기에서의 열처리를 통해 Crofer mesh와 LSM 코팅층 계면에서의 Cr 함유 산화물의 형성을 효과적으로 억제하여 전기적 특성의 열화를 억제할 수 있다.

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.41-47
• /
• 2003

In this paper, a tetrahedral mesh generation algorithm which uses a grid based method for interior region and an advancing front method for outer surface region is proposed. In order to apply an advancing front method for outer region of an object, a new operator so called a hole operator has been developed to handle multiple shells. With this grid based approach in the interior region, more stable and uniform meshes can be constructed especially in the interior region.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1153-1156
• /
• 2002

In this parer, a high quality mesh generation method by using interval arithmetic is proposed. In the proposed method, the variance of a tangent vector at the point is considered by the automatic differentiation. From the variance, sampling points on the surface are judged whether it is adequate or not, which is calculated by the interval arithmetic. Then Delaunay triangulation is performed to the obtained sampling points, and a set of meshes is generated. The proposed method is hard to overlook the local variation of surfaces.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.69-80
• /
• 1992

In screen printing process, printing are streching screen meshs of an angle of 45deg. This angle need much more screen mesh`s quantity of 15% than 22.5deg. To seach mesh angles have affect on reproducting fine line pattern, we modeled the expecting image according to screen angles change and reconfirmed it`s useful and valid from experimentation.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 추계학술발표회 초록집
• /
• pp.36-36
• /
• 2006

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 추계학술발표회 초록집
• /
• pp.39-40
• /
• 2006

• Journal of the Korean Wood Science and Technology
• /
• 제1권2호
• /
• pp.3-10
• /
• 1973

This study was carried out to examine the characeristics of waste sanders(S)from. plywood and pre-finishing plywood surface sanding and double saw finishing, as a new extander in urea-formaldehyde resin(UFR) in plywood adhesive, and to focus, adhesive strength using the glue extended with milled sanders(MS) as extender, leveling the optimum amount of MS to be added, and examining the physical properties of glue extended MS & S. Also economical good feasibility of substitution for wheat flour(WF) with MS as a new extender is analyzed and presented in details. Selecting three standard samples of 80, 100 and 180 mesh, sorking them in distilled water at $20^{\circ}C$, 24 hours, redrying at $105^{\circ}C$ and rescreening the sample with standard screen, again, the 3 samples of 80, 100, and 180 mesh are passed 23 percent through 80 mesh sander standard sample 27 percent through on 100 mesh and only 10.9 percent through 180 mesh, respectively. The particle size of retained parts are greater in size of redried form. It seems undoubtly that particles to be extended in glue are got swollen and become greater in size and coarser in shape. The shape of fresh S particles are irregular thin needle with small scale, as shown in Figure 5. PFS are so finer than plywood S that only 9.8 percent of the S retained on 100 mest screen, 24. 30 percent on 100-160 mesh, and 65.9% on 160-180 mesh. But particle size of the fresh S is large enough to make the viscosity of glue direct extended with S too high to apply it glue spreader. The glue extended with milled sanders(MS). 3 hours milled PFS or 6 hours milled plywood S, having particle sizes shown in Tables 7 and 8, as ratio of Reain/MS/WF/water: 100/8/8/10, indicate good viscosity of 16 to 24 ps, as shown in Figure 5, for applying direct to glue spreader, have high tensile-shear strength (adhesive strength), 102.4 kp/$cm^2$, and 94 percent wood failure.

• 방송공학회논문지
• /
• 제13권2호
• /
• pp.214-221
• /
• 2008

본 논문에서는 두 개의 3차원 메쉬 프레임에서 추출한 운동 성질을 이용하여 형태 특징을 반영하는 3차원 메쉬 에디팅 알고리듬을 제안하였다. 제안하는 알고리듬은 형태적 특징을 유지하는 결과를 얻기 위해서 두 개의 메쉬 프레임으로부터 국부 영역의 표면 특징을 반영하는 운동 특성 벡터를 이용한다. 에디팅 과정에서 사용자는 임의의 꼭지점을 조작 꼭지점(anchor vertex)으로 선택하여 자유롭게 이동시킨다. 조작 꼭지점에는 사용자의 조작에 따라 강제된 운동이 부여되고, 이 운동 특성을 유지하도록 이웃 꼭지점들의 위치가 정해진다. 이 과정을 통해 샘플 메쉬의 특징을 보존하는 에디팅 결과를 얻는다. 모의 실험을 통하여 제안하는 알고리듬이 사용자가 의도한 조작을 충분히 반영하는 동시에 샘플 메쉬 쌍에서 나타나는 운동성을 보존하는 결과를 도출함을 확인하였다.