• Korea-Australia Rheology Journal
• /
• 제18권2호
• /
• pp.109-118
• /
• 2006

A finite-element method was employed to analyze axisymmetric unsteady motion of a deformable bubble near the wall. In the present study a deformable bubble in a Newtonian medium near the wall was considered. In solving the governing equations a structured mesh generator was used to describe the collapse of highly deformed bubbles with the Arbitrary Lagrangian Eulerian (ALE) method being employed in order to capture the transient bubble boundary effectively. In order to check the accuracy of the present FE analysis we compared the results of our FE solutions with the result of the collapse of spherical bubbles in a large body of fluid in which solutions can be obtained using a 1D FE analysis. It has been found that 1D and 2D bubble deformations are in good agreement for spherically symmetric problems confirming the validity of the numerical code. Non-spherically symmetric problems were also solved for the collapse of bubble located near a plane solid wall. We have shown that a microjet develops at the bubble boundary away from the wall as already observed experimentally. We have discussed the effect of Reynolds number and distance of the bubble center from the wall on the transient collapse pattern of bubble.

• 한국멀티미디어학회논문지
• /
• 제6권1호
• /
• pp.89-96
• /
• 2003

본 논문은 카오스 이론의 프랙탈 차원과 수정된 에농 어트랙터를 이용하여 인쇄체 숫자를 인식하는 새로운 방법을 제안한다. 먼저 숫자 영상으로부터 망 특징 투영 특징, 교차거리 특징을 1차 구한 후, 이 특징들을 시계열 데이터로 변환한다. 그리고 본 논문에서 제안한 수정된 에농 시스템을 이용하여 프랙탈 차원을 나타내는 자연 척도 및 정보 비트값을 구한다. 마지막으로 표준패턴 데이터베이스와 비교하여, 최소 거리값을 이용하여 숫자 인식을 행한다. 실험 결과 10가지 숫자에 대하여 100%의 분류율을 나타내었고, 또한 실제 문서를 대상으로 실험한 결과 90%의 인식률과 초당 26자의 인식속도를 보임으로써 제안된 방법의 유효성을 보였다.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.265-272
• /
• 2004

This study was conducted to investigate the community structure and distributional pattern of meiobenthos in the deep-sea bottom of the Clarion-Clipperton Fracture Zone of northeastern Pacific during July 2001. Examination of sediment samples collected on the eight survey station showed that there were 10 different types of meiobenthos. The most abundant meiobenthic animals were nematodes in all stations. Sarcomastigophorans, benthic harpacticoids were next abundant meiobenthos. Vertical distribution of meiobenthic animals showed the highest individual numbers in the surface sediment layers of 0-1 cm depth and showed more steep decreasing trend as sediment gets deeper on the stations of high latitude located in $16-17^{\circ}N$. Horizontal distribution of meiobenthic animal in the study area within CCFZ showed high densities of meiobenthos at the stations had few manganese nodules on their sediment surface in the site of low latitude. For size distribution analyses showed that animals which fit into the sieve mesh size of 0.063 mm were abundant.

• Wind and Structures
• /
• 제23권4호
• /
• pp.301-311
• /
• 2016

The numerous benefits of Savonius turbine such as simple in structure, has appropriate self-start ability, relatively low operating velocity, water acceptance from any direction and low environmental impact have generated interests among researchers. However, it suffers from a lower efficiency compared to other types of water turbine. To improve its performance, parameters such flow pattern, pressure and velocity in different conditions must be analyzed. For this purpose, a detailed description on the flow field of various types of Savonius rotors is required. This article presents a numerical study on a nonlinear two-dimensional flow over a classic Savonius type rotor and a Benesh type rotor. In this experiment, sliding mesh was used for solving the motion of the bucket. The unsteady Reynolds averaged Navier-Stokes equations were solved for velocity and pressure coupling by using the SIMPLE (Semi-Implicit Method for Pressure linked Equations) algorithm. Other than that, the turbulence model using $k-{\varepsilon}$ standard obtained good results. This simulation demonstrated the method of the flow field characteristics, the behavior of velocity vectors and pressure distribution contours in and around the areas of the bucket.

• 한국주조공학회지
• /
• 제13권3호
• /
• pp.268-275
• /
• 1993

In gravity die casting, die cooling systems are frequently employed with water cooling to remove the heat of the solidifying metal. Thermal modeling is an important technique in mold design for improving the productivity of the process. Computer simulation system which consists of pre-processor, main solidification simulator and post-processor has been developed for three dimensional solidification analysis of cyclic gravity die casting. The pre-processor is used for mesh generation in a PC system. The modified finite difference method is adopted for the main solidification simulation algorithm during all the casting cycles. The post-processor graphically presents the simulation results. Several experiments in automotive cast piston were carried out. The temperature variations in casting and mold with time are measured experimentally, and the results are compared with calculation results. The effects of cycle number on solidification pattern are also studied. Several experimental results for the prediction of shrinkage defects are compared with calculated results.

• 대한공간정보학회지
• /
• 제5권2호
• /
• pp.145-152
• /
• 1997

본 연구에서는 2차원 유사이송모형과 GIS 기법을 결합하여 기존의 수치해석모형만을 이용한 기법에 비해서 더욱 정확한 모의수행을 실시하였다. 수치지도작성작업규칙을 준수하고, TM좌표계를 사용함으로써 서로 다른 축척을 가진 자료들에 대한 정확한 좌표보정을 실시하였고, 실제축척의 유한요소망을 구성할 수 있었다. 금강유역의 지천합류부에서 백제대교의 5km 구간에 대해 $200m^3/s$ 유량조건하에서 속도백터도, 등수심도, 등유속도, 퇴적량분포도 등을 도시하였다. 본 연구의 모의결과는 1차원 부등류해석에 의한 계산결과 및 실제 관측치 등과 비교하여 잘 일치되고 있었으며 하천의 만곡특성에 따른 유황과 퇴적분포를 정성적인 면에서 효과적으로 모의하고 있었다.

• 한국유체기계학회 논문집
• /
• 제13권6호
• /
• pp.51-56
• /
• 2010

A numerical simulation is carried out to investigate the effect of flow rate variation and performance characteristics of double-suction centrifugal pump. Two types of pump which have different impeller inlet breadth and curvature of the shroud line consist of six blades impeller and shroud ring. Finite-volume method with structured mesh and $k-\omega$ Shear Stress Transport turbulence model was used to guaranty more accurate prediction of turbulent flow in the pump impeller. Total head, power and overall efficiency were calculated to obtain performance characteristics of two types of pump according to the variation of flow rate. From the results, impeller having smooth curve along the shroud line obtained good performance. The lower flow rate, the more circulation region, flow unsteadiness and complicate flow pattern are observed. Complicated internal flow phenomena through impellers such as flow separation, pressure loss, flow unsteadiness and performance are investigated and discussed.

• 한국식품과학회지
• /
• 제5권3호
• /
• pp.153-156
• /
• 1973

본실험(本實驗)은 Shimadzu Gas Chromatography GC-5 APF를 이용(利用)하였으며 column은 OV-1을 $80{\sim}100$ mesh의 Shimalite W에 coating 한 것을 사용(使用)하였으며 수소염(水素炎) ion 화(化) 검출기(檢出器) FID-IB로 $1.6{\times}10^{-9}$ A/FS에서 측정(測定)하였다. 그 결과(結果) 5종류(種類)의 탈피(脫皮) 및 시판(市販) 참깨기름의 Chromatogram에 나타난 triglyceride의 함량(含量)은 $C_{50}$이 $3.0{\sim}4.5%$의 범위이고 $C_{52}$가 $23{\sim}28%$ 그리고 $C_{54}$가 $68{\sim}74%$로 가장 높았다.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.726-732
• /
• 2011

The aerodynamic and aeroacoustic performance of discharge grille of outdoor unit of air-conditioner was investigated in this study. Discharge grille is one of outdoor unit's important parts to affect the flow rate and Overall Sound Pressure Level(OSPL). New type of discharge grille was suggested based on the results of numerical simulation. To simulate the flow pattern near the propeller fan, commercial flow solver FLUENT was used. Sliding mesh method was used for rotating propeller fan and initial condition for unsteady model was calculated by Multiple Reference Frame(MRF) method. To minimize the interaction noise between fan blade wake and discharge grille, new discharge grille has radial rib which is aligned with trailing edge of fan blade. And inclined radial rib was adopted for reducing flow rate drop in discharge grille. The optimization of inclined angle of radial grille was performed experimentally.

• 산업기술연구
• /
• 제27권A호
• /
• pp.103-110
• /
• 2007

Concrete is a material that will crack during its service life by its very nature. For bridge decks this is especially significant as these cracks allow accelerated ingress of chlorides and the subsequent corrosion of the reinforcing steel and deck deterioration. Very-early strength latex-modified concrete (below ; VES-LMC) was developed in order to realize early-opening-to-traffic bridge deck concrete. Although there has been little research to document the degree of cracking in VES-LMC overlay, there has been a general perception among highway agencies that overlay cracking of VES-LMC, particularly early-age cracking, is a one of problems which should be solved. The purpose of this study was to analyze the cause of map, transverse and longitudinal cracking in VES-LMC and to provide a control methods for minimizing the occurrence of cracks. The proposed prevention against map and transverse cracking was verified by field applications. VES cement was modified, the unit cement contents was reduced into $360kg/m^3$ from $390kg/m^3$, the maximum size of coarse aggregate was increase into 19mm from 13mm, wire mesh and steel fibers were incorporated in concrete mixture.