• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.243-246
• /
• 2002

In this paper, an advanced load balancing algorithm in nth order Hypercube distributed system has been proposed. The new algorithm uses centralized load-balancing to avoid blocking phenomenon and processor thrashing, and shows the results which makes loads to approach average value of loads. The new algorithm os compared with several other algorithm and it shows a merit in cost function value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.5
• /
• pp.500-506
• /
• 2024

The transparent electrode characteristics of the SnO₂/AgNi/SnO₂ (OMO) multilayer structures prepared by sputtering were investigated according to the annealing temperature. Ni-doped Ag of various compositions was selected as the metal layer and heat treatment was performed at 100~300℃ to evaluate the thermal stability of the metals. The manufactured OMO multilayer structures were heat treated for 6 hours at 400~600℃ in an N₂ atmosphere. The structural, electrical, and optical properties of the OMO structures before and after annealing were evaluated and analyzed using a UV-VIS spectrophotometer, 4-point probe, XPS, FE-SEM, etc. OMO with Ni-doped Ag shows improved performance due to the reduction of structural defects of Ag during annealing, but OMO structure with pure Ag shows degradation characteristics due to Ag diffusion into the oxide layer during high-temperature annealing. The figure of merit (FOM) of SnO₂/Ag/SnO₂ was highest at room temperature and gradually decreased as the heat treatment temperature increased. On the other hand, the FOM value of SnO₂/AgNi/SnO₂ mostly showed its maximum value at high temperature(~550℃). In particular, the FOM value of SnO₂/Ag-Ni (3.2 at%)/SnO₂ was estimated to be approximately 2.38×10^-2 Ω^-1. Compared to transparent electrodes made of other similar materials, the FOM value of the SnO₂/Ag-Ni (3.2 at%)/SnO₂ multilayer structure is competitive and is expected to be used as an alternative transparent conductive electrode in various devices.

• Journal of the Korean Home Economics Association
• /
• v.42 no.6
• /
• pp.111-121
• /
• 2004

This study focused on the development of creative materials by applying tapestry to produce original and high-grade dresses with consideration the modems' tendency to place high value on personal taste and style. The development remained sensitive to current trends and attempted to expand into high value-added dresses. Materials in modem fashion design, as a basis of the fashion industry, can lead to a current of new fashion and produce novel and creative ideas by stimulating the designers' creativity. Designers can diversely express a form according to their intention, since tapestry allows the expression of various feelings of texture and forms according to the combination mode of technique, structure and materials on a basic plane. Moreover, tapestry encrourages the development of varied designs because it can effectively display the texture and color of a textile surface through the careful selection of materials even under the same technique. Tapestry can apply forms similar to a textile's basic structure to fashion design and can create high added value with the merit of being 'handmade'.

• Journal of the Korean Statistical Society
• /
• v.5 no.2
• /
• pp.119-127
• /
• 1976

By examining Table 1, it is confirmed that the two model fertility scheduels for 1960 and 1975 are close agreement with the census data in Korea. The declines of age-specific fertility are more remarkable among older women than among younger, as exhibited in Table 3 and Fig. 2. A merit of this fitted model schedule as compared to fitted conventional frequency distributions such as the Pearson Type III curve, is that the model schedule incorporates combinations of intuitively understandable demographic factors. The value of m, a measure of fertility control, increased remarkably from 0.531 in 1960 to 2.429 in 1975. Considering the fact that the average value of m for forty-three schedules shown in the 1965 Demographic Yearbook was 1.0, and the value of m in England and Wales for 1965 was 1.91, the recent level of fertility control in Korea may be considered higher than generally believed.

• Journal of the Korean Ceramic Society
• /
• v.17 no.2
• /
• pp.89-95
• /
• 1980

The effect of non-stoichimetry and sintering temperature on the magnetic properties of materials in the system $Ni_{0.39}Zn_{0.61}Fe_{2.0+x}O_4$ have been investigated. The value of x used in initial weighing of oxides were varied from -0.04 to -0.12. The value of x, however, appears to be from +0.04 to -0.04 after ferrite powder preparation due to iron pick up during ball mill mixing and grinding. The densities of specimens which were deficientinrion were higher than those with excess ion. Specimens with near stoichiometric composition showed maximum initial permeability an dminimum coercivity whereas high values of quality factor (Q) were observed in iron deficient specimens. The quality factor decreased monotonically with increasing sintering temperature, but the permeability showed maxima with increasing sintering temperature. Thus highest value of figure of merit $\mu$Q was obtained in composition $Ni_{0.39}Zn_{0.61}Fe_{1.98O4}$ sintered at 100$0^{\circ}C$ for 3 hrs. in an air atmosphere.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.304-309
• /
• 2013

This paper proposes a intelligent approach on range decision of figure of merit. Unknown range of the underwater target and the non-fixed signal excess make the uncertainty for the tracking process. Using the input data of signal excess related to the range, we establish the rule of the fuzzy set and the original data acquired by sonar can be transformed to the fuzzified data set. To reduce the error arisen from the unexpected data, we use the new data transformed in fuzzy set. The piecewise relations of the min value, max one, and the mean one are calculated. The three values are used for the expected range of the underwater target. By analysing the fluctuation of the data, we can expect the target's position and the characteristics of the maneuvering. The examples are presented to show the performance and the effectiveness of the proposed method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.190-195
• /
• 2021

Typical Mn-SnO₂/Ag/Mn-SnO₂ tri-layer films were prepared on a PET substrate by RF/DC magnetron sputtering method at room temperature. Based on EMP simulation, the thicknesses of the top and bottom Mn-doped SnO₂ layers were kept at 40 nm and the Ag layer was maintained at 13 nm for continuous electrical conduction. The experimentally measured optical transmittances at 550 nm wavelength were ranged from 82.9 to 88.1 % and sheet resistances were varied from 5.9 to 6.9 Ω/☐. The highest value of figure of merit, ϕ_TC was 48.1 × 10^-3 Ω^-1. Based on bending test under 4 and 5 mm of inner and outer curvature radius condition, tri-layer film resistance varies only by approximately 1.5 % after 10,000 bending cycles, showing excellent mechanical flexibility.

• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.248-253
• /
• 2023

An efficient global optimization approach for a periodic plasmonic nanoslit array based on extraordinary optical transmission within an acceptable time range is proposed using 𝚀 factor analysis method. The particle swarm optimization is employed as a global optimization tool. The figure of merit is defined as a product of transmission peak value and 𝚀 factor. The design variables are the slit width, height, and period of the slit array, respectively. The optical properties such as transmission spectrum and bandwidth are calculated rigorously using the finite element method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.304-310
• /
• 2014

This paper presents the analysis of the coupling coefficient(k), Q value of the resonator, and the optimum loaded resistance at Rx for the magnetically coupled wireless power transmission using two loops(resonators). In addition, the metamaterial, conductor, and the relay methods have been used in order to improve the limitation problem of transmission efficiency by using the figure of merit. We have achieved the increase of transmission efficiency about 11~60 % using the proposed methods by analyzing and comparing the results based on EM simulations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.242-248
• /
• 2008

The structural, optical and electrical properties of ZnO films doped with 1.5 at% of 3A materials(B, Al, Ga, In) were studied by sol-gel process. The films were found to be c-axis (002) oriented hexagonal structure on glass substrate, when post heated at 500 $^{\circ}C$. The surface of the films showed a uniform and nano size microstructure and the crystalline size of doped films decreased. The lattice constants of ZnO:B/Al/Ga increased than that of ZnO, while ZnO:In decreased. All the films were highly transparent(above 90 %) in the visible region. The energy gaps of ZnO:B/Al/Ga were increased a little, but that of ZnO:In was not changed. The resistivities of ZnO:Al/Ga/In were less than 0.1 $\Omega$cm. All the films showed a semiconductor properties in the light or temperature, however ZnO:In was less sensitive to it. A figure of merit of ZnO:In had the highest value of 0.025 $\Omega^{-1}$ in all samples.