• 전기학회논문지
• /
• 제59권1호
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.30-34
• /
• 2007

레이저는 단시간에 높은 정밀도로 다량의 측정을 행할 수 있는 장점을 지니며, 이의 구체적인 실현이 지상 LiDAR라고도 불리는 지상레이저 스캐너이다. 본 논문에서는 Z-F 레이저시스템을 사용하여 대상물의 3차원 레이저 측정, Point 데이터의 생성, Registration & Merging, Polygon 데이터의 생성, Surface 데이터 생성의 과정을 거쳐 수행된 고건축물의 3차원 모델링 결과에 대하여 기술한다. 문화재의 보존 및 복원을 위한 자료 기록 및 측정에 있어서 지상 레이저스캐너를 사용한 고건축물의 데이터베이스 구축기술은 문화유산의 복원 및 관련분야에 커다란 영향력으로 자리매김할 수 있을 것으로 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.968-973
• /
• 2014

Aluminum anode of marine growth prevention system for ship is installed in seachest or sea water strainer. The Al anode is connected to a control panel that feeds a current to the anode. The dissolved ions produced by the anode are transferred in sea water, spreads through the sea water pipe system and creates a protective film in the pipelines. Thereby, corrosion in pipeline system significantly is reduced. In application on condition as a steel ship, the big accident can be caused by the corrosion. Accordingly, in this research, we evaluated influence of applied current and flow velocity on electrochemical characteristics of Al anode for marine growth prevention system (MGPS). Based on the results of the erosion-cavitation experiments, cavitation rate increased greatly until 120 min. of the experimental time and decreased a little at the point of 180 min. where pit grew and merging occurred but showed a tendency of steadily increasing consumption rates. Based on the results of the Tafel analysis, compared to static states, corrosion current densities show a rapidly increasing tendency when flow occurred.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1634-1637
• /
• 2003

Any given object on the motor-driven turntable is pictured from 8 to 72 different views with a digital camera. 3D shape reconstruction is performed with the integrated software called by Scanware from these multiple digital photographs. There are several steps such as configuration, calibration, capturing, segmentation, shape creation, texturing and merging process during the shape reconstruction process. 3D geometry data can be exported to cad data such as Autocad input file. Also 3D image model is generated from 3D geometry and texture data, and is used to advertise the model in the internet environment. Consumers can see the object realistically from wanted views by rotating or zooming in the internet browsers with Scanbull spx plug-in. The spx format allows a compact saving of 3D objects to handle or download. There are many types of scan equipments such as laser scanners and photogrammetric scanners. Line or point scan methods by laser can generate precise 3D geometry but cannot obtain color textures in general. Reversely, 3D image modeling with photogrammetry can generate not only geometries but also textures from associated polygons. We got various 3D image models and introduced the process of getting 3D image model of an internet-connected watchdog robot.

• Communications for Statistical Applications and Methods
• /
• 제18권1호
• /
• pp.89-102
• /
• 2011

이산화는 데이터 마이닝을 위한 전처리 과정으로서 연속형 변수를 이산형 변수로 바꾸는 과정이고, 이산화 시킨 데이터가 원래 가지고 있던 정보손실을 최소로 하면서 높은 분류정확도를 가지는 것을 목적으로 한다. 지금까지 많은 이산화 알고리즘이 제안되었는데, 본 논문에서는 분할 이산화와 병합 이산화의 관점에서 최근까지 제안된 대표적인 이산화 알고리즘들을 비교하고, 이산화 알고리즘이 가지고 있는 특성을 연구하였다. 또한 비교 연구한 이산화 알고리즘을 R코드로 작성하여 다른 연구에 사용할 수 있도록 하였다.

• 한국측량학회지
• /
• 제9권2호
• /
• pp.103-113
• /
• 1991

SPOT 수치영상자료를 이용한 지상좌표 계산 과정에서 지상기준점 및 검사점 입럭좌표의 정확도는 계산 결과의 신빙성에 커다란 영향을 준다. CRT 모니터상에 직접 나타난 SPOT 원초 영상은 일반적으로 지상물체의 판별과 점위치 결정에 적합하지 않으므로 전체영상의 대비개선, 영상소보간, 경계선강조, 공간필터처리 등 적절한 영상처리 기병의 적용이 필요하다. 본 연구에서는 대상지역의 3차원 위치 결정과 파장대특성분석에 이용되는 SPOT 위성영상의 시각분석에 필요한 수치영상처리기법의 원리를 고찰하고, 그 적용을 위한 알고리즘을 개발하여 프로그래밍 하였으며, 실제 P-mode 및 XS-mode의 SPOT 영상을 이용하여 고해상도 천연색영상인 SPOT P＋XS 영상으로 합성하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권4호
• /
• pp.1076-1089
• /
• 2012

Home automation networks are good environments for merging sensor networks and consumer electronics technologies. It is very important to reduce the energy consumption of each sensor node because sensor nodes operate with limited power based on a battery that cannot be easily replaced. One of the primary mechanisms for achieving low energy operation in energy-constrained wireless sensor networks is the duty-cycle operation, but this operation has several problems. For example, unnecessary energy consumption occurs during synchronization between transmission schedules and sleep schedules. In addition, a low duty-cycle usually causes more performance degradation, if the network becomes congested. Therefore, an appropriate control scheme is required to solve these problems. In this paper, we propose UDC (Unsynchronized Duty-cycle Control), which prevents energy waste caused by unnecessary preamble transmission and avoids congestion using duty-cycle adjustment. In addition, the scheme adjusts the starting point of the duty-cycle in order to reduce sleep delay. Our simulation results show that UDC improves the reliability and energy efficiency while reducing the end-to-end delay of the unsynchronized duty-cycled MAC (Media Access Control) protocol in sensor-based home automation networks.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.29.4-30
• /
• 2009

Extra-tidal feature of the globular clusters such as tidal tails and halos can be a crucial evidence of the merging scenario of the Galaxy formation in the dynamical point of view. To search for such an extra-tidal feature of globular clusters located in the Galactic bulge(RGC<3kpc), we obtained wide-field near-infrared JHKs images of 6 metal-poor ([Fe/H]<-1.0) clusters and 3 metal-rich ([Fe/H]>-1.0) clusters. Observations were carried out using IRSF 1.4m telescope and SIRIUS near-infrared camera, during 2006~2007. The obtained images have a total maximum field-of-view of ~ $21'\times 21'$. To select clusters' member stars and minimize the field star contaminations, we applied CMD masking algorithm. Smoothed surface density contour maps with selected stars for each cluster show overdensity features around the tidal radius and beyond. Also, radial surface density profiles within the tidal radius of the clusters show an overdensity feature as a change of slope of the radial profile. The results add further observational constraints of the formation of the Galactic bulge.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.668-679
• /
• 2018

Experimental and numerical data were compared through a counterflow burner for the characteristic of basic flame about SNG- C11. In order to use the numerical mechanism accurately, the validation was carried out at strain rate ($a_g=30$, $120s^{-1}$) and the UCSD model showed satisfactory results. The effective Lewis number of the extinction boundary, and the behavior of extinction for the symmetric flames of the SNG-C11, could be explained through the trend of $Le_V$, and the flame of the extinction condition was inspected by the major species, key radicals and the chemical reaction paths. The interactions phenomenon in the merged flames has chemical reaction path for producing $HO_2$ were generated at stagnation point. It can be expected the one of major factors in interaction phenomenon.

• 천문학회보
• /
• 제44권2호
• /
• pp.40.3-40.3
• /
• 2019

Our recent observations of the Sun through strong spectral lines have revealed several important properties of the three-minute umbral oscillations inside sunspots -- the oscillations of intensity and Doppler velocity with periods of 2 to 3 minutes. The oscillations usually occur in the form of a time series of oscillation packets each of which lasts 10 to 20 minutes, not as continuous trains. Each oscillation packet is characterized by a singly peaked power spectrum of velocity oscillation. The oscillations propagate in the vertical direction from the photosphere to the corona. In the upper chromosphere, they develop into shocks that eventually collide with the transition region. When shocks propagate along a highly inclined direction, the merging of two successive shocks can take place. Once they enter the corona, they change to linear compressional waves. In the image plane, the three-minute oscillations propagate with high speeds in the transverse direction as well, usually propagating radially outwards from a point, and sometimes accompanying spiraling patterns of Doppler velocity. These observational properties can be theoretically explained by postulating the spatio-temporally localized source of fast MHD waves at a depth of about 2000 km below the surface, the excitation of slow MHD waves via mode conversion near the photosphere, and the resonance of the slow waves in the photospheric layer below the temperature minimum, and the nonlinear development of slow waves in the chromosphere.