Because young men's slacks are becoming more slim-fitting today, this study attempts to identify room for improvement by comparing and analyzing the patterns of men's slacks in the literature and those of manufacturers. Selected for the study are two patterns from the literature and one from manufacturers (Slacks A, B, C); those from studies are slim silhouette pants with no tucking around the waist at the front. Subjects for the Fit tests and the pattern designs were men in their twenties with average body shapes in accordance with the figures in Size Korea 2010. Pants were made from muslin fabric and the Fit tests were carried out with three subjects and a panel of five experts to evaluate comfort and appearance. The analysis of the patterns revealed that Slacks A were the longest followed by C and then B. Slacks C had the most girth ease, and Slacks B were the slimmest in both length and girth. Movement tests showed Slacks A to be the most comfortable followed by B and then C. The appearance test found that Slacks B were the most attractive, followed by A, and then C. The fits at the front, back and sides of all three pants were more or less the same. We suggest that more studies be done on pants patterns adjusting them for proper ease and using elastic fabric in order to maintain the slim fit and also to be comfortable to wear.
This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.
This study held a questionnaire for men in their 60s or above to analyze the market research of slacks, understand the characteristics of their lower body types, and provide the basic data for the slacks pattern-making fitting the body types of senior citizens. The findings are as follows. According to the results of a questionnaire, elderly men preferred order-made slacks for better fitness, but they favored ready-made owing to the matter of prices. In particular, the girth of waist was the most considered when purchasing. However, as most customers tended to repair slacks length and the waist part, their unsatisfaction with sizes was rather high. In body measurements, elderly men had higher variable coefficients or more individual differences in the items of thickness and angles than in those of height, length, and girth. Factor analysis revealed 5 front and 6 side factors. According to the results of front-side somatotype analysis, pimento-flat, trapezoid-flat, and bent-flat types require narrower pattern designs in down-upper width than the middle-aged class. In addition, pimento-protruded hip and straight-jar types need to be designed in the same amount as in the middle-aged class. Based on the questionnaire results, down-upper length as 1cm above real dimensions was analyzed to have superior sense of wearing.
This study held physical measurement for male subjects in their 20s living in Ningbo City, Zhejiang Province in China, showing the biggest market in men's clothes. Their representative lower body types with average shapes and sizes were chosen so as to develop men's slacks patterns with better dimension fitness. The following are the results of the analysis: 1. Slacks patterns were made based on the mean measurement values of 5 people, who were closest to the representative body types, from the index*absolute group of 47 people. The dimensions of application for slacks pattern-making were 77cm(omphalion waist circumference), 91cm(hip circumference), and 103cm(slacks length). 2. For the comparison of high-fitness and more-room pattern dimensions, 5 styles of slacks were made: Korean, Chinese, British, Japanese, and industrial. In the dressing fitness tests, industrial patterns had excellent appearance and Japanese ones had the best function. 3. Based on the analysis results of slacks pattern comparison, the target slacks were experimentally made and received superior evaluation points to the compared slacks patterns in two times of evaluation for appearance and function. 4. The final slacks pattern in this research had the following dimensions: front waist circumference: W(1-2cm with room included)/4-1cm, back waist circumference: W/4+1cm, front hip circumference: H(9$\sim$10cm with room included)/4-1cm, back hip circumference: H/4+1cm, crotch length: H/4-1.5cm, hip length: crotch length-H/12, front crotch extension: H/16-1.5cm, back crotch extension: H/8+3cm, knee line: 33cm below crotch line, front tuck amount: 4cm, back dart amount: 2.5cm(center) and 1.5cm(side), and back dart length: 10cm (center) and 6cm(side).
Journal of the Korea Fashion and Costume Design Association
/
v.16
no.2
/
pp.195-209
/
2014
This study aimed to identify the preferred jeans design and needed improvements through survey research aimed at men aged 20~29. In order to identify the current wearing trends and problems of jeans, the study carried out survey research aimed at men in their twenties who had purchased and worn jeans. As a result of survey research aimed at consumers, it was discovered that fit was deemed most important during the purchase of jeans. As to the question which type of slacks was worn most frequently, the answer was slim type jeans. Regarding body parts that became the selection standard during the purchase of jeans, the answer was thigh and waist. The body parts that showed the lowest assessment result appeared to be thigh circumference, waist measurement, slacks length, and slacks bottom. To a question asking about things to be repaired and to be improved, they replied that there were problems in measurement fit, dissatisfaction with materials, and washing and management.
Journal of the Korean Society of Clothing and Textiles
/
v.20
no.1
/
pp.54-65
/
1996
The purposes of this study were 1) to present the optimum slacks pattern for young men, 2) to develope a methodology to draft basic slacks pattern using AutoCAD The total crotch legth and the shape of the crutch line were determined by anthropometric data analysis. The total crotch length was calculated with the waist girth, the hip girth and the crotch length measurements. The anthropometric data utilized for this procedure was National Anthropometric Survey of Korea, 1992. And multidimensional anthropometric measurements were carried out for 6 male college students between the age of 18 to 24. The subjects were measured with the Martin's anthropometer and the sliding gauge. Mean, standard deviation and t-test were performed for statistical analysis of the data. The automatic drafting method was programmed by AutoLISP in AutoCAD. The automatic drafting was based on the Muller's slacks pattern drafting method, the measurements of slacks construction components and the curve of crotch line. The crotch line was drafted using of the arc function in AutoCAD. The total crotch length was calcuated using the multiple regression equation. The experimental pattern developed to accomodate individual body wleasurements expected to produce customized apparel production in QRS(Quick Response System) production system.
The objective of this study was to investigate the fit preference for ready-to-wear clothes(jackets and slacks) of adult men and to determine the respective differences by the age range and obesity level. The study method was a questionnaire survey with 465 male subjects aged from 20 to 59 years old. The questionnaire was composed of fit preference tendency, physical measurements, age, and occupation. The findings were as follows. 1. Regarding the fit preferred for each part of jackets and slacks, among ready-to-wears, the 'thing with some extra width' in every part was most favored, followed by the 'thing fitting perfectly'. 2. Differences were found in the fit preference tendency by the age of adult men. The fit preference tendency was higher among those in their 20's than among those of the other age ranges. 3. Differences were also found in the fit preference tendency by the obesity level of adult men. The fit preference tendency was higher in the order of the emaciation, normalcy, and obesity types. 4. The fit preference tendency was more affected by age than by obesity level. Clothing companies should consider ease to offer the proper clothing desired by consumers.
This study was focused on classifying lower-body trunk and revealing the lower-body characteristics of the Chinese males in their 20s through 40s for their slacks pattern design. Compared with the 20s, the subjects in their 30s and 40s had small vertical and big horizontal sizes and showed a somatotype difference through a horizontal change. According to the size of absolute values, the lower body of Chinese men was "tall and normal trunk"(43.9%). Based on the shape of index values, Type 3(40.3%) was representative with average hip-surface length, waist-hip width difference and long upper hip. While Type 3 was seen a lot in the 20s(51.8%), 30s and 40s were each represented by Type 2(47.1%) with the smallest waist-hip width difference, average upper hip, and long hip-surface length and Type 1(45.9%) with small waist-hip width difference, average upper hip, and short hip-surface length. As this study is confined to Ningbo City of Zhejiang Province and has a small number of subjects, the generalization of the findings should be more serious. Further research will be centered on the development of slacks patterns in consideration of the body type changes.
The focus of this research was concerned with studying lower body type for Korean adult males. To understand the features of men's lower body required to organize an optimal sizing system for men's tight-fit slacks, information from the measuring values based on research on the physical standard of the nation(l997) were summarized; in addition, a factor analysis and a cluster analysis among multivariate analyses were performed. In terms of the need for appropriate fit in motorcycle wear, basic lower body parts applying to each item had to be taken into consideration to enhance sizing suitability. In the case of the length of the lower limbs, the inclusion of protectors plays an important role in affecting sizing. The factors related to the lower body were defined as follows: Factor 1 was the vertical dimension of the lower body, Factor 2 was the horizontal dimension of waist and hip, Factor 3 was the horizontal dimension of the lower limbs, Factor 4 was the length of hips, and Factor 5 was the ankle height. The lower body part was also divided into 3 clusters. Cluster 1 referred to the smallest stature and skeleton structure among the 3 body types. Cluster 2 represented the biggest stature, with a thin lower limbs body type. Cluster 3 represented a medium stature but with a large skeleton structure of lower limbs, a muscular type. In conclusion, Cluster 2 appeared most in the 20s age groups, but Cluster 3 appeared most in each of the 30s, 40's, and 50's age groups.
This study aims at presenting the basic data related to the somatotype of elderly men at the point of Korea's entering into an aging society. Efforts were made to classify the lower-half somatotype of elderly men, with the application of the measurements of 261 elderly men of 60 years of age and over up to 70, which were available from the physique measurement survey project for Koreans. The number of analysis items was 31. The statistical treatment was made through SPSS win 12.0 program, and the analytical methods used were the basic statistics, factor analysis, and cluster analysis. The findings are as follows: Elderly men experienced the decreases in height and weight, in comparison with middle-aged ones, while they showed a flat shape at trunk, with more protruded waist and abdomen and with flat buttock. The analysis of the constituting factors for the lower-half body of elderly men resulted in the 6 items. The elements constituting the lower-half body of elderly men included the shape from waist to hip, the spread of hip and height of knee, the shape of leg, thigh size, the length of leg, and the volume of abdominal. The total accountability was 81.59 %. The cluster analysis for lower-half somatotype of elderly men resulted in the classification of three types. The above findings are intended to assist the designing of ready-made slacks with a high level of fitness for elderly men.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.