• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.143-145
• /
• 1998

식품공업 분야에서 특정 성분의 분리, 정제, 농축은 매우 중요한 단위공정으로써 추출(Extraction), 여과(Filtration), 증류(Distillation), 증발(Evaporation)등의 조작을 통하여 실시되고 있다. 최근 들어 화학공업, 기계공업, 식품공업의 지속적인 발전에 힘입어 단위조작을 효율적으로 실시할 수 있는 기술로써 국내의 산업화되고 있는 것이 분리막 기술이다. 현재 식품공업 분야에서 활용되고 있는 분리막공정의 종류는 정밀여과(Microfiltration), 한외여과(Ultrafiltration), 초정밀여과(Nanofiltration), 역삼투(Reverse Osmosis) 시스템으로 유제품, 조미료, 음료공업, 장유산업, 기능성 인자의 분리 등에 공업적으로 점차 그 도입 가능성이 증가하고 있다.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.816-822
• /
• 2011

Pervaporation is known to be a low energy consumption process since it needs only an electric power to maintain the permeate side in vacuum. Also, the pervaporation is an environmentally clean technology because it does not use the third material such as an entrainer for either an azeotropic distillation or an extractive distillation. In this study, Silicalite-1 particles are hydrothermally synthesized and polydimethylsiloxane(PDMS)-zeolite composite membranes are prepared with a mixture of synthesized Silicalite-1 particles and PDMS-polymer. They are used to separate n-butanol from its aqueous solution. Pervaporation characteristics such as a permeation flux and a separation factor are investigated as a function of the feed concentration and the weight % of Silicalite-1 particles in the membrane. A 1,000 $cm^3$ aqueous solution containing butanol of low mole fraction such as order of 0.001 was used as a feed to the membrane cell while the pressure of the permeation side was kept about 0.2~0.3 torr. When the butanol concentration in the feed solution was 0.015 mole fraction, the flux of n-butanol significantly increased from 14.5 g/ $m^2$/hr to 186.3 g/$m^2$/hr as the Silicalite-1 content increased from 0 wt% to 10 wt%, indicating that the Silicalite-1 molecular sieve improved the membrane permselectivity from 4.8 to 11.8 due to its unique crystalline microporous structure and its strong hydrophobicity. Consequently, the concentration of n-butanol in the permeate substantially increased from 0.07 to 0.15 mole fraction. This composite membrane could be potentially appliable for separation of n-butanol from insitu fermentation broth where n-butanol is produced at a fairly low concentration of 0.015 mole fraction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.279-284
• /
• 2015

As non-conventional oil resources such as shale gas have been widely developed, proper treatment of flowback and produced water is becoming important. However, application of conventional water treatment techniques is limited due to high concentration of pollutants such as oil and grease, organics, harmful chemicals, and inorganic ions. In this study, we examined the feasibility of using forward osmosis (FO) and air gap membrane distillation (AGMD) as novel treatment options for shale gas wastewater. Laboratory-scale FO and MD devices were fabricated and used for the experiments. Results showed that FO could be used to treat the synthetic wastewater. Using 5 M NaCl as the draw solution, the flux was approximately $6L/m^2-hr$ during the treatment of low range wastewater (TDS: 66,000 mg/L). Nevertheless, AGMD was more effective to treat high range wastewater (Total Dissolved Solid: 260,000 mg/L) than FO.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.267-277
• /
• 2010

Gas separation membranes have been developed for decades in various areas to replace the conventional processes. Membrane processes for gas separation have many advantages of energy saving, compact size, and easy scale-up. Nowadays, gas separation processes is widely spreaded in nitrogen generating system, hydrogen generating system, membrane dryer, on board inert gas generating system, natural gas purification, biogas purification and fuel cells. Carbon dioxide separation process using membrane would be a strong candidate of carbon dioxide capturing process. In order to broaden the scope of application of gas separation membranes, development of new materials which can overcome the borderline of Robeson's plot should be necessary, so that many researchers and companies are trying to develop the new materials like polymers containing cardo and spiro group and PIMs (polymers for intrinsic microporosity).

• Membrane Journal
• /
• v.33 no.6
• /
• pp.369-376
• /
• 2023

In this study, the alternative to the energy-intensive conventional vacuum distillation process, an eco-friendly and energy-efficient pervaporation separation was employed in 1,2 hexane diol/water (HDO/water) mixture. The crosslinked PVA-glutaraldehyde was coated inside the alumina hollow fiber membrane (Al-HF). In the HDO/IPA pervaporation separation, optimization of the membrane concerning PVA/GA ratio, curing temperature, and pervaporation operating condition were performed. In the long-term stability test, the sustainable pervaporation separation performance giving flux in the range of 1.90~2.16 kg/m²h, and water content in permeate was higher than 99.5% (separation factor = 68) was obtained from the PVA/GA (molar ratio = 0.08, curing temperature = 80℃) coated Al-HF membrane from HDO/water (25/75, w/w, %) mixture at 40℃. Therefore, this work provides potential and inspiration for PVA-based membranes to mitigate excessive energy requirements in HDO/water separation by pervaporation.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.354-354
• /
• 2006

Alginic acid-silica hydrogel films was prepared for testing as protective coating materials for PTFE OD membranes. Unprotected hydrophobic membranes are subject to wet-out when contacted by surface-active agents. Films were characterised using SEM, XRD, DSC, mechanical strength measurements, and water-swelling measurements. In OD trials using coated membranes, no wet-out occurred over the 15 h duration of three consecutive 5 h OD trials using orange oil-water mixtures. In the case of detergent solutions, the coating afforded protection to the membrane for 4-5 h. In a separate trial, no wet-out occurred when the coated side of the membrane was placed in contact with 1.2 wt % orange oil for 72 hours.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.98-101
• /
• 2004

Utilization of biomass resources has considerable contribution to the reduction of carbon dioxide emission. Ethanol is one of the biomass products and is used as an additive to gasoline in several countries. Conventional process to produce ethanol involves energy-intensive azeotropic distillation. Pervaporation (PV) or vapor permeation (VP) is considered to be an alternative separation process to the conventional process.(omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.211-215
• /
• 2004

Olefins are the most important feedstock in the petrochemical industry and thus the separation of olefin/paraffin mixtures is crucial to that industry. At present, this separation is mostly carried out using cryogenic distillation processes that require enormous capital investment and have high operational costs.(omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.03a
• /
• pp.69-90
• /
• 1996

In the chemical industry, in the pharmaceutical industry, and in a number of other industries separation processes are necessary to separate and purify products and raw materials [1,2]. Separation processes are also widely used in other applications such as in recycling valuable materials from waste streams. Unit operations for separation processes can be classified in phase separation techniques and component separation techniques based on the nature of the feed mixtures to be separated. The former techniques are used for the separation of heterogeneous mixtures, in which the feed is already present in two or more separated phases on a micro-scale. The latter are suitable for the separation of homogeneous mixtures such as gaseous mixtures and mixtures of completely miscible liquids. tn these cases the separation into individual components is generally achieved by utilizing the differences in physico-chemical properties of components, and is much more difficult compared to phase separation techniques. Separation processes such as distillation, evaporation, liquid-liquid extraction, and crystallization belong to this class.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.09a
• /
• pp.39-64
• /
• 1996

Probably over most of recorded time, the quality of drinking water has been praised for good health and blamed for bad health. Certainly it is true, considering pathogenic organism that cause typhoid fever, giardiasis, etc., or considering chemical contaminants suspected of causing cancer. Drinking "natural" waters with a high mineral content is generally accepted to be healthy. Water containing very low levels of total dissolved solids (TDS), such as distilled water, is believed by some to help "cure" arthritis by "washing out" calcium from deposits in joints. Along with this reasoning, many believe that drinking very tow TDS water, treated by distillation, reverse osmosis (RO) or deionization (DD, "leaches" minerals from the body and causes mineral deficiencies with subsequent ill health effects.cies with subsequent ill health effects.