• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.183-188
• /
• 1999

Due to many advantages of advanced composite materials, research on the application of composites to the construction industry is initiated. In this paper, fabrication methods efficient for infrastructures and application examples of each method are discussed. It also presents the structural characteristics of concrete filled glass fiber reinforced composite tubular member. Experimental results shows that strength and ductility of composite compression member is considerably increased due to concrete confinement action of composite surface.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.197-206
• /
• 1995

In structural design procedure, The procedure of member selection manages complex data relationship and reflects structural expert's knowledge. It is a difficult problem to construct an effective system with the conventional l programming technique. Knowledge_based s!'stem is a software system capable of supporting the explicit representation of expert's knowledge in member selection process through member data and reasoning mechanisms. This study describes useful methodology for structuring knowledge and representing relation between member data and knowledge. And this study shows the application of this member for member selection in the steel structural design.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.176-183
• /
• 1995

The design process of pre-cast concrete member needs various design parameters and the engineer's experiences. The introduction of knowledge-based system in the design of pre-cast concrete member enables us to design complicated members using the designer's heuristics. The objectives of this research are to study useful methodology for representing knowledge and data in the development of knowledge-based system and to show the application of methodology by developing a prototype sysytem for design of pre-cast concrete member. This paper nrst describes methodology for building knowledge-based system. It then presents knowledge-based system for pre-cast concerete member design.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.81-90
• /
• 1993

The optimum design of a structure requires the determination of the economical member size and shape of the structure which satisfies the design condition and function. In this study, the process of design automatization of three-dimensional truss structure introduces the optimization technique tests its application in the design automatization, proposes its application method and applies the example structure of the parabolic antenna truss. Using the Formex Algebra of configuration function, the structure's mesh-generation is automatized. By using the program developed in this study, the input member array, member size and load condition designer can generate the input data file for the structure analysis and optimum design. This study is aimed at the development of a design automatization system that search for tile optimum value of a structure design by observing the structure's sensitivity from the modification of member array and member property.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.149-155
• /
• 2006

This paper is concerned with the weight reduction of front side member of a vehicle considering the application of high strength steel sheet. The influence of steel sheet grade and thickness on the energy absorption, impact load and deformed shape of front side member is investigated by using reverse engineering and FE-analysis. The reverse engineering is applied to obtain 3D model of front side member from B.I.W for the FE simulation. FE analysis is carried out with commercial crash analysis SW PAM-CRASH. The crashworthiness of front side member is considerably improved with steel sheet strength and thickness increase. From the result of this study the weight reduction in automotive parts for the improvement of the fuel efficiency can be easily achieved with replacing high strength steel without deterioration of crashworthiness.

• Journal of the Korean Home Economics Association
• /
• v.12 no.34
• /
• pp.679-697
• /
• 1974

I. Preface A. Establishment. There are many psycological and physiological difficulties that students have made practical application to a building site of 600 pyung and a structure of 65 pyung each sixteen students in the Home Management House, but there exists problem in students apprentice and management of professors. B. Purpose of study This research aim to seek a high degree of efficiency approach in investigating, studying and analyzing factors of the problem in Home Management which have been faced in women colleges in seoul. C. Content of study. This study is aim at finding out the problems including facilites, system, guiding principle, working bottleneck and administrative problem in making practical application of Home Management. II. A plan and method of study A. This subject of statiscal research is 616 women students in senior year from september 27 1970 to October 31 1974. The rate of collection of questionnaire is 100 percent. B. The Method of study is devised through refering documents, interview with students, questionnaire and observation. III. Result of study Of the total of 29 university in seoul, 24 Universities have its Course of Home Economic among which only 12 have Home Management for making practical application. Home Management House for making practical application is located mainly in campus but some of them exceptimally are in outside university. Students practice mainly at civilzed resident, apartment, bangalow so forth, and demention of which occupies approxiamtely 50-600 pyung (land) and 20-70 pyung (Building). A member with 4 or 20 students make practical application from 10 days to 3 months. A member consists of students and assistant teacher, and practice site classifies into living school for Professors living, and another school for Professors and assistant teachers. Answer to a questionnaire. 616 students answer to a questionnaire. 49 Perfect of 616 students like to have a member with 12 students like to have a member with 12 students, 38 percent student a member with 16 students. About the period of making practical About the period of making practical application, 76 percent students like to have two or three week period. 19 percent students think it a short period and 4 percent students think it a long period. There is none who thinks 25 day period day period to be short. About making practical application, 66 percent of 616 students feel uneasy, 40 percent students feel lack of sleep and tired. Students take a pleasure in having a conversation with their friends, inviting their mother, having dinner-party and birthday party. 77 percent students want to invite their father and 67 percent students want to invite their boy-friends. It is hard to have a good personal relation about the great the result of practice, students acknowledge themselves that they have learned about Cautiousness and they are sure of good Home Manager. There are 9 difficult problems during the period. IV. Summary discussion a. Many problems come from having a number of students. b. Students feel tired with their practice if over three weeks. No Matter how good a plan is, it useless if students can't adapt themselves to it. Suggestions 1) it is good to have a member with 5 or 6 students, and it is suitable to have two or three week period, and to have an area of 20 or 30 pyung. 2) it's proposed a profess or to live together in making practical application of Home Management 3) it is proposed a professor to have a sure T.O. and to be treated better.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.233-234
• /
• 2023

This paper confirms the application sites of dry coupler technology, which is a direct connection method using screw threads, and Unlike wet couplers, this method can stand on its own without proof support and continuous work on the upper part. Furthermore, concludes with personal considerations to improve constructability.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.363-370
• /
• 2004

This Paper presents the response force distribution factor(RDF) and its application to recalculation of member forces in case of partial changes of structures. Using RDF, the mutuality of response forces between members can be estimated. The reanalysis technique recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity using RDF. It is expected that RDF and the reanalysis technique can be used to develop efficient analysis techniques for tall buildings.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.266-269
• /
• 2003

This paper is concerned with a forming analysis of front side members and the application of the forming effect in crash analysis of auto-body. Drawbead restraining forces are calculated with ABAQUS/Strandard in order to identify the boundary condition in forming process. Forming analysis with equivalent drawbead is carried out with LS-DYNA3D. In order to demonstrate the validity of the forming analysis, quantitative comparison of the thickness variation between the real product and the numerical simulation result is carried out. Forming histories obtained from the forming analysis are utilized as the initial condition of the crash analysis for accurate assessment of the crashworthiness.

• Journal of Korea Foundry Society
• /
• v.17 no.2
• /
• pp.118-129
• /
• 1997