• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.1
• /
• pp.65-70
• /
• 1998

To understand the caused for poor response to superovulation in water buffalo compared to crossbred cows, follicular events, before start of superovulation, during superovulation and after superovulation were compared. Follicular development was monitored a day before start of superovulation, daily upto superestrus and on the day of flushing. A real time B mode diagnostic instrument equipped with a linear array, 5 MHz transducer was used in five crossbred cows and five Murrah buffaloes. Crossbred cows yielded significantly (p < 0.01) higher number of corpora lutea than buffaloes (21 vs 10). The mean number of small size (2 to 5 mm); medium size (6 to 9 mm) and large size $({\geq}10mm)$ follicles, a day before start of superovulation were almost similar or even slightly higher in buffalo. Though initial shift in the mean number of follicles was higher in buffalo than cow, yet, from Day 2 to Day 3 of the treatment, the average increase in medium (3.2 vs 1.2) and large size (5.0 vs 2.0) follicles was higher in cows than buffaloes. The mean number of medium and large size follicles was 9.8 and 14.4 in cows and 6.4 and 7.6 in buffaloes. On the day of flushing, the number of large size follicle was more in buffaloes than cows, indicating the ovulation problem in this species. The major conclusion from this investigation was that, a day before start of superovulatory treatment, the number of small and medium size follicles was slightly higher in buffaloes, even then superovulatory response was better in cows, due to shift, recruitment and passage of follicles from smaller size to larger size from Day 2 of treatment. Ovulation problem in buffaloes was also responsible for lower superovulatory responses as revealed by the presence of higher number of large size follicles on the day of flushing.

• Korean Journal of Child Studies
• /
• v.34 no.1
• /
• pp.35-51
• /
• 2013

The purpose of this study is to synthesize research findings on the relationship between parenting efficacy and the variables related to it, as well as to produce results using meta-analysis. The following questions guide this study : Which variables are frequently conducted in research related to parenting efficacy? What is the effect size of each variable? The 65 studies whose results are analyzed in this paper were collected via a search for investigations focusing on 'parenting efficacy'. The studies were used for meta-analysis in which eleven variables were selected. The results of the analysis indicate that a large effect size is produced by the parenting stress in a negative direction. A higher than medium effect size occurs on the basis of parenting beliefs in a negative direction. A higher than medium effect size is also caused by the father's involvement in child care and social support. A medium effect size is produced on the basis of children's temperament, and a small effect size is the result of the mother's academic background, parenting knowledge, and parent's income. There is no relationship between parenting efficacy and children's gender.

• Journal of Embryo Transfer
• /
• v.14 no.2
• /
• pp.93-97
• /
• 1999

The development potential of bovine somatic cells was evaluated using nuclear transfer. A single donor cell derived from fetus of HanWoo(Korean Native Cattle) was selected and deposited into perivitelline space of each enucleated oocyte before electrical fusion and activation. Nuclei of donor cells starved for 7 days (37%) tended to support the development of reconstitute embryo the blastocyst stage better than those of donor cells starved 3, 14 and 30 days. The cleavage rate was significantly lower(P<0.05) in reconstitute embryos derived from large size donor cells(51.2%), than those from small medium size donor cells(76.6 and 73.5, respectively). The developmental rate to blastocyst of reconstructed embryos from medium size donor cells was higher than those from small and medium size donor cells. This study demonstrates that an appropriate culture period for induction into quiescent stage and the size of donor cells effect on the efficiency of nuclear transfer using cultured bovine cells.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1457-1458
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.475-476
• /
• 2010

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.230-240
• /
• 2008

In order to synthesize polymer particle containing inorganic material, styrene and nbutylmetacrylate were copolymerized with alumina by dispersion polymerization. The ratio in weight of styrene to n-butyl methacrylate was 3:1. Poly(N-vinyl pyrrolidon) and 2,2'-azobis(isobutyronitrile) were added as stabilizer and as initiator, respectively. The change of particle size was investigated with concentration of initiator, the type of medium, the mixed solubility parameter (${\delta}_{mix}$) of medium, and coupling agent. The enhancement in concentration of initiator resulted in slight increase of particle size. The increase of polarizability in medium also yielded the increase of particle size. In case of changing the ratio of isopropanol to distilled water, we could find relationship of $[{\delta}_{mix}]^{-4.01}\;{\propto}$ particle size and $[{\delta}_{mix}]^{-0.83}\;{\propto}$ particle size distribution(PSD). The type and the concentration of coupling agent showed no effect on the particle size and PSD.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.133-141
• /
• 2008

The need for total enterprise management that covers from accepting orders, design, cost, procurement, manufacture, and delivery has been recently raised in order for efficient project management of small and medium size plant construction enterprises. This trend is reflected in the introduction of EPM(Enterprise Project Management) solutions by some shipbuilding enterprises and large construction corporations. In step with the trend, small and medium size plant construction enterprises are enabled to provide knowledge base in terms of reducing cost and production period and managing portfolio for accepting orders and attaining contract by inducing customized EPM This study presents a design of customized EPM based on a case study of a company. It exhibits a collaborative/collaboration resource-supply model which can be universally applied to small and medium size job-order production enterprises. The research discusses that under the assumption that information is shared internally between departments on planning, supply, manufacture, and quality control in order to create collaborative environment and close participation is created externally between suppliers and orderers, productivity can be improved in cost reduction through planning efficient collaborative supply model.

• Structural Engineering and Mechanics
• /
• v.31 no.6
• /
• pp.697-716
• /
• 2009

This paper summarizes an experimental and analytical study on the seismic behavior of high strength reinforced concrete columns under cyclic loading. In total six cantilever columns with different sizes and concrete compressive strengths were tested. Three columns, small size, had a $325{\times}325$ mm cross section and the three other columns, medium size, were $520{\times}520$ mm. Concrete compressive strength was 80, 130 and 180 MPa. All specimens were designed in accordance with the Japanese design guidelines. The tests demonstrated that, for specimens made of 180 MPa concrete compressive strength, spalling of cover concrete was very brittle followed by a significant decrease in strength. Curvature was much important for the small size than for the medium size columns. Concrete compressive strength had no effect on the curvature distribution for a drift varying between -2% and +2%. However, it had an effect on the drift corresponding to the peak moment and on the equivalent viscous damping variation. Simple equations are proposed for 1) evaluating the concrete Young's modulus for high strength concrete and for 2) evaluating the moment-drift envelope curves for the medium size columns knowing that of the small size columns. Experimental moment-drift and axial strain-drift histories were well predicted using a fiber model developed by the authors.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.250-253
• /
• 2000

We researched effects of growth on initial inoculum size, liquid volume, and medium feeding rate etc. Cell suspension inoculated at low cell concentrations showed a typical growth reduction, whereas root cultures showed an improvement in growth. In this paper, Hairy roots showed high growth rate at 0.4 % inoculum size and 100 mL liquid volume in 250 mL flask cultures.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.94-108
• /
• 2004

TQM has been applied to the industry area regardless of the size of company. BNQA model should be identically applied to large companies and small & medium-sized company. However, there are many evidences that TQM model should be modified according to the size of company. In this study, we analyzed the practice of TQM in Korean small & medium-sized Company. Also, we tried to give some suggestions for improving the competitiveness of the small & medium-sized company. The result of this study is that leadership, work system, education and strategy development should be improved in domestic companies, and work system, education and strategy deployment should be improved in foreign companies.