• 한국지형학회지
• /
• 제26권2호
• /
• pp.15-27
• /
• 2019

This study tries to reveal transport mechanism and origin of components from fluvial terrace deposits in Danyang and Geum River basins, through grain size partitioning using the Weibull function. Grain size parameters suggest that the samples analyzed in this study can be grouped into the coarse, fine and medium samples. The coarse samples are partitioned into three or four components. More than 65% of the coarse samples consist of components by suspension and saltation by fluvial process, while components by attachment to coarse grains or aggregates and/or by individual grains deposited under non-flow condition are also found in the coarse samples. The fine samples consist of four components and components found in loess deposits in Korea occupy >70%, suggestive of the same transport mechanisms (westerlies and winter monsoon) and common source areas with loess deposits in Korea. However, components by aeolian process from local sources as well as by fluvial process are also found in the fine samples. The medium samples are partitioned into components with similar sizes to the coarse and fine samples, respectively.

• 벤처창업연구
• /
• 제12권6호
• /
• pp.41-47
• /
• 2017

본 연구는 중소벤처기업무역이익에 관한 실증적 분석을 위하여 수행되었다. 그간 무역후생에 대한 연구들이 우리나라 전체 기업규모를 대상으로 수행되었거나, 대표적 기업(평균)을 중심으로 이루어졌으나, 본 연구에서는 중소벤처기업과 대기업을 분리하여 파레토 및 대수 정규기업규모분포에 대한 결정모수를 추정하고, 이 자료를 바탕으로 무역이익을 분석하였다. 분석결과는 다음과 같이 요약된다. 첫째, 기업규모의 이질성이 클수록 무역후생이 크게 나타났다. 이 결과는 중소벤처기업 및 대기업의 경우에도 동일하게 나타났다. 무역이익은 파레토규모분포를 가정할 경우 대수정규분포를 가정한 경우보다 압도적으로 크게 나타났다. 둘째, 대기업의 경우가 중소벤처기업의 경우보다 무역후생이 크게 나타났다. 이 분석결과는 대기업규모분포가 중소벤처기업규모분포보다 이질성이 더 크기 때문에 나타난 결과이다. 셋째, 기업규모분포가 동질적이라고 가정할 경우에 무역후생의 차이가 존재하지 않았다. 마지막으로 본 연구의 정책적 시사점으로 무역후생증대의 관점에서 기업규모이질성은 매우 중요한 역할을 차지한다. 중장기적으로 중소벤처기업의 다양성을 증대시키는 중소벤처기업정책이 필요한 이유이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.13-17
• /
• 1993

Analytical models for the prediction of the size of hardened zone in laser surface hardening are presented. The models are based on the solutions to the problem of three-dimensional heat flow in plates with infinite thickness. The validity of the model was tested on medium carbon steel for Gaaussian mode of beam. Then the model for rectangular beam was used for the prediction of the size of harened zone on various hardening process parameters. From the calculation results it appeared that the size and shape of the hardened zone are strongly dependent on process parameters suchas beam mode, beam size, and traverse speed.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 제10차 국제학술회의 및 추계정기 학술발표회
• /
• pp.21-21
• /
• 2003

An efficient plant regeneration system was developed for Hordeum vulgare L. cv Baegdong - an important Korean cultivar. The protocol was based on a series of experiments involving the sizes of mature embryos and the culture media. The embryo size is found to be critical for the establishment of embryogenic callus. Embryos of 1.1-1.5 mm size showed a much higher ability to produce embryogenic callus capable of regenerating green plants. The auxins picloram and dicamba proved effective in inducing callus from mature embryos. 2.5 mg $I^{-1}$ dicamba and 4.0 mg $I^{-1}$ picloram in Murashige and Skoog's (MS) medium was optimum for the induction of primary callus. The induced primary callus was loose and friable which ultimately developed into creamy white and compact callus after transferring into the fresh medium. Multiple shoots were induced in the MS medium supplemented with 6.0 g $I^{-1}$ maltose, 20 mg $I^{-1}$ sorbitol, 0.5 mg $I^{-1}$ 2,4-D and 1.0 mg $I^{-1}$ kinetin and the rate was 6.5 shoots per embryo. Regenerated plants were hardy and developed roots rapidly in the medium containing 0.2 $I^{-1}$ IBA. This efficient plant regeneration system provides a foundation for generating transgenic plants of this important barley cultivar.

• 한국자원식물학회지
• /
• 제10권4호
• /
• pp.375-381
• /
• 1997

1. 소양댐의 수질을 조사, 분석하여 일본 주산지인 정강(靜岡)과 비교한 결과 pH는 비슷하고, 전기 전도도는 $0.03{\sim}0.2mmho/cm$ 안에 들어 재배에 적당한 조건이었다. 2. 소양댐 용수의 용존성분중 질소, 인산은 일본보다 약간 높고, K는 낮았다. 황은 높은 수준이었고, Mg는 매우 낮았다. 3. 분주묘의 초장 변화는 대묘에서는 이중 sigmoid, 중묘, 소묘는 S형 생장을 하였다. 4. 분주묘의 근경중 분포에서 40g이상의 개체는 대묘는 87%, 중묘는 80%, 소묘는 54%의 분포를 보였고, 상품 근경중은 대묘 723kg/10a, 중묘 639kg/10a 이었다. 5. 실생묘의 묘 크기별 초장 변화 곡선은 묘 크기에 상관없이 S형 생장을 나타냈다. 6. 실생묘의 묘 크기별 상품율은 대묘 60%, 중묘 13%, 소묘 20%, 상품근경중은 대묘 395kg/10a, 중묘 102kg, 소묘 160kg 이었다. 7. 고추냉이 주요 형질간 상관관계에서 초장은 엽병장, 엽장, 엽폭, 엽병중과 엽폭은 엽중, 엽병중과 정의 상관관계를, 근경중은 주경엽수, 근경장, 근경폭, 엽중, 총중량과 고도의 정의 상관관계를 보였고, 엽병중, 총근경중과도 유의성 있는 상관을 보였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 심포지엄
• /
• pp.59-67
• /
• 2003

An efficient plant regeneration system was developed for Hordeum vulgare L. cv Baegdong - an important Korean cultivar. The protocol was based on a series of experiments involving the sizes of mature embryos and the culture media. The embryo size is found to be critical for the establishment of embryogenic callus. Embryos of 1.1-1.5 mm size showed a much higher ability to produce embryogenic callus capable of regenerating green plants. The auxins picloram and dicamba proved effective in inducing callus from mature embryos. $2.5\;m;I^{-1}$ dicamba and $4.0\;mg\;I^{-1}$ picloram in Murashige and Skoog's (MS) medium was optimum for the induction of primary callus. The induced primary callus was loose and friable which ultimately developed into creamy white and compact callus after transferring into the fresh medium. Multiple shoots were induced in the MS medium supplemented with $6.0\;g\;I^{-1}$ maltose, $20\;mg\;I^{-1}$ sorbitol, $0.5\;mg\;I^{-1}$ 2, 4-D and $1.0\;mg\;I^{-1}$ kinetin and the rate was 6.5 shoots per embryo. Regenerated plants were hardy and developed roots rapidly in the medium containing $0.2\;I^{-1}$ IBA. This efficient plant regeneration system provides a foundation for generating transgenic plants of this important barley cultivar.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.33-36
• /
• 2001

This study was carried out to improve the liquid culture methods of Paecilomyces japonica. The results show that the size of granular mycelium is smaller when the shaking speed is increased. Especially, the granular mycelium is the smallest at the shaking speed of 150rpm under the photoperiod of 12L-12D. Dry weight of mycelium was averagely 1.216 g in the Sikworm larva (SL) medium, and the weight was 2 times heavier than in the Potato dextrose (PD) medium. By adding 6 g of 6 mmbeads in the SL medium, the dry weight is increased to 1.332 g. The optimal addition of silkworm larval powder to the culture medium for gest harvest was 1.360$\pm$0.67 g in dry weight.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.390-401
• /
• 2010

In this paper, we wish to develop suitable TPM Model (C-TPM) in Korea's medium and small enterprises. TPM technique was informed well and there are a lot of success instances but there was problem that is not fitness in medium and small enterprises. In this study, we propose C-TPM model in medium and small enterprises by examining TPM success example variously. This model construction constructed based on medium and small enterprises field supervision and experience, and verification of model is assignment late.

• 간호행정학회지
• /
• 제18권1호
• /
• pp.56-66
• /
• 2012

Purpose: This study was conducted to compare internal marketing, job satisfaction and customer orientation between nurses in small-medium hospitals and nurses in general hospitals. Method: The participants were 470 nurses were working in 8 small-medium hospitals and 5 general hospitals. Data were collected with structured questionnaires in July, 2010, and analyzed using descriptive statistics, ${\chi}^2$-test, MANCOVA, t-test, One-way ANOVA, and Scheffe test with PASW (SPSS) 18.0 program. Results: There was no significant difference between small-medium hospital nurses and general hospital nurses in internal marketing and customer orientation. But nurses in small-medium hospitals had higher levels of job satisfaction than general hospital nurses. Conclusions: These findings demonstrate the necessity of developing programs that will help to improve job satisfaction in nurses.

• 한국IT서비스학회지
• /
• 제2권1호
• /
• pp.1-15
• /
• 2003

Relentless competition and price cutting race make small/medium software business very difficult to maintain their business. Especially small software businesses are often at a disadvantage when they try to win government contracts, Due to the characteristics and importance of software industry, there is no doubt that government support for mall/medium software business is indispensible. In fact, the development of the US software industry has been strongly influenced by government policy during postware period. This paper attempts to examine the general small/medium business supporting policies currently implemented. In addition, policies in the construction industry and the US federal government are explored, in order to find appropriate roles the government should play.