• Journal of the Korean institute of surface engineering
• /
• v.42 no.5
• /
• pp.240-245
• /
• 2009

The Friction Stir Welding (FSW) has mainly been used for making butt joints in Al alloys. Development of FSW would expand the number of applications. The FSW is a relatively solid-state joining process. This study possibility of a welding between C1020 and Al6063 by means of FSW has fundamentally clarified. The primary process parameters, such as a rotating speed, rotating direction of tool and off-set of pin periphery from materials interface were optimize, respectively.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.139-140
• /
• 2014

Stabilization characteristics of highly $N_2$-diluted $CH_4-O_2$ flame in an axially two-section porous inert medium were experimentally investigated for its application to the waste gas scrubber in semiconductor manufacturing processes. The flame behaviors were observed with respect to the fuel and $N_2$ flow rates and the equivalence ratios. As a result, four kinds of flame behaviors such as stable, flashback crossing the interface, blowout and sudden extinction were observed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.156-157
• /
• 2000

The amplification method using evanescent wave coupling has a long history and has been widely used as a new lasing method, especially, in the waveguide optics$^{(1)}$ . In particular, it has been observed experimentally that when the light wave propagating in a dielectric medium is totally reflected at the planar interface between the dielectric and a pumped active medium, the reflectance may be greater than unity, i.e., amplification is possible$^{(2)}$ . There were several attempts by other authors to explain this enhanced internal reflection (EIR) classically$^{(3)}$ . They commonly introduced a complex refractive index for the active medium with its imaginary part being negative, and this scheme was also used to describe an amplification process in a waveguide having active-cladding region$^{(4)}$ . However these theories are phenomenological, using macroscopic constants, and therefore a microscopic theory is needed to understand EIR in a fundamental level. (omitted)

• Journal of Korea Multimedia Society
• /
• v.9 no.6
• /
• pp.720-727
• /
• 2006

In this paper, we propose a method which allows the SuperSQL query processor to share as much code as possible among various, generators, each of which is responsible for the output of a certain medium. SuperSQL is an enhanced query-processing system that converts database records into a variety of formats such as XML, HTML, PDF and etc. However, the existing SuperSQL media generator would require creation of a different processor for each medium, causing duplicated development cost. This research makes three main contributions: First, it analyzes the structures of various media, examining any possibility of integration based on their common structure. Second, it also facilitates the addition of a new output media generator by separating constructors and decorators from each medium. Last, it provides an integrated user interface to each media by method of the Media Abstraction Table Concept. We also show the performance and feasibility of our system using experimental results.

• Geomechanics and Engineering
• /
• v.13 no.4
• /
• pp.601-619
• /
• 2017

Cantilever retaining wall movements generally depend on the intensity and duration of ground motion, the response of the soil underlying the wall, the response of the backfill, the structural rigidity, and soil-structure interaction (SSI). This paper investigates the effect of material properties on seismic response of backfill-cantilever retaining wall-soil/foundation interaction system considering SSI. The material properties varied include the modulus of elasticity, Poisson's ratio, and mass density of the wall material. A series of nonlinear time history analyses with variation of material properties of the cantilever retaining wall are carried out by using the suggested finite element model (FEM). The backfill and foundation soil are modelled as an elastoplastic medium obeying the Drucker-Prager yield criterion, and the backfill-wall interface behavior is taken into consideration by using interface elements between the wall and soil to allow for de-bonding. The viscous boundary model is used in three dimensions to consider radiational effect of the seismic waves through the soil medium. In the seismic analyses, North-South component of the ground motion recorded during August 17, 1999 Kocaeli Earthquake in Yarimca station is used. Dynamic equations of motions are solved by using Newmark's direct step-by-step integration method. The response quantities incorporate the lateral displacements of the wall relative to the moving base and the stresses in the wall in all directions. The results show that while the modulus of elasticity has a considerable effect on seismic behavior of cantilever retaining wall, the Poisson's ratio and mass density of the wall material have negligible effects on seismic response.

• Structural Engineering and Mechanics
• /
• v.49 no.1
• /
• pp.1-22
• /
• 2014

A seismic evaluation is made of the response to horizontal ground shaking of cantilever retaining walls using the finite element model in three dimensional space whose verification is provided analytically through the modal analysis technique in case of the assumptions of fixed base, complete bonding behavior at the wall-soil interface, and elastic behavior of soil. Thanks to the versatility of the finite element model, the retained medium is then idealized as a uniform, elastoplastic stratum of constant thickness and semi-infinite extent in the horizontal direction considering debonding behavior at the interface in order to perform comprehensive soil-structure interaction (SSI) analyses. The parameters varied include the flexibility of the wall, the properties of the soil medium, and the characteristics of the ground motion. Two different finite element models corresponding with flexible and rigid wall configurations are studied for six different soil types under the effects of two different ground motions. The response quantities examined incorporate the lateral displacements of the wall relative to the moving base and the stresses in the wall in all directions. The results show that the wall flexibility and soil properties have a major effect on seismic behavior of cantilever retaining walls and should be considered in design criteria of cantilever walls. Furthermore, the results of the numerical investigations are expected to be useful for the better understanding and the optimization of seismic design of this particular type of retaining structure.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.4
• /
• pp.56-60
• /
• 2021

The microwave Radar used for special purposes in the past is being applied in various areas due to the technological advancement and cost reduction, and is particularly applied to autonomous driving in the automobile field. The FMCW (Frequency Modulated Continuous Wave) Radar can acquire level information of liquid in vessel based on the beat frequency obtained by continuously transmitting and receiving signals by modulating the frequency over time. However, for cryogenic fluids with small impedance differences between liquid medium and gas medium, such as liquid nitrogen and liquid hydrogen, it is difficult to apply a typical Radar-based level meter. In this study, we develop an 80 GHz FMCW Radar for level measurement of cryogenic fluids with small impedance differences between media and analyze its characteristics. Here, because of the low intrinsic impedance difference, most of the transmitted signal passes through the liquid nitrogen interface and is reflected at the bottom of the vessel. To solve this problem, a radar measurement algorithm was designed to detect multiple targets and separate the distance signal to the bottom of the vessel in order to estimate the precise position on the liquid nitrogen interface. Thereafter, performance verification experiments were performed according to the liquid nitrogen level using the developed radar level meter.

• Journal of Powder Materials
• /
• v.26 no.4
• /
• pp.319-326
• /
• 2019

Additive manufacturing (AM) is a highly innovative method for joining dissimilar materials for industrial applications. In the present work, AM of STS630 and Ti-6Al-4V powder alloys on medium entropy alloys (MEAs) NiCrCo and NiCrCoMn is studied. The STS630 and Ti64 powders are deposited on the MEAs. Joint delamination and cracks are observed after the deposition of Ti64 on the MEAs, whereas the deposition of STS630 on the MEAs is successful, without any cracks and joint delamination. The microstructure around the fusion zone interface is characterized by scanning electron microscopy and X-ray diffraction. Intermetallic compounds are formed at the interfacial regions of MEA-Ti64 samples. In addition, Vicker's hardness value increased dramatically at the joint interface between MEAs and Ti-6Al-4V compared to that between MEAs and STS630. This result is attributed to the brittle nature of the joint, which can lead to a decrease in the joint strength.

• Journal of Adhesion and Interface
• /
• v.4 no.2
• /
• pp.21-29
• /
• 2003

Hot AC anodising has been evaluated us pre-treatment for aluminium prior to structural adhesive bonding. Phosphoric and sulphuric acid hot AC anodising showed very promising adhesion promoter capabilities with durability comparable with the best standard DC anodising procedures. AC anodising does not required etching prior to anodising and offers u pre-treatment time down to 20 seconds. The interface/interphase between the aluminium substrate and the adhesive was investigated in order to get a better understanding of the involved adhesion mechanisms and to explain the long-tenn properties. The alkaline medium formed at the oxide layer/adhesive interface has been shown to induce a partial dissolution of the oxide layer leading to the formation of metallic ions which diffuse in the adhesive (EPMA measurements). The effect of diffusion of the Al ions on adhesion and joint durability is still uncertain but studies showed that pre-bond moisture affected the joints durability and to some extent the diffusion length. specially for DC anodised samples. So far no direct correlation could be established between the diffusion length d and the joints durability but new trials with better control over the elapsed time between bonding and adhesive curing are expected to help getting a better understanding of the involved mechanisms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.121-126
• /
• 2006

This paper report on the design and implementation of a 9.6kbps DSSS CDMA modem for a medium speed wireless link. The proposed modem provides a general purpose I/O interface with a microprocessor. The I/O interface consists of 8-bit data bus, chip enable, read/write, and interrupt pins. In transmit block, the 8-bit data delivered from the I/O interface buffer is converted to 9.6kbps serial data, which are spreaded into 76.8kcps with 8-bit PN code generated inside the modem by direct sequence method. An 8-bit training sequence is preceded in the data frame for data synchronization in receiver. In receiver block the PN code is synchronized from the received data spreaded to 76.8kcps and find the data timing from the 8-bit training sequence. We have used the Early-and-Late integration method. The modem has been implemented and verified using a Xilix FPGA board and has been fabricated as an ASIC CHIP through Hynir $0.25{\mu}m$ CMOS. The multiple accessing method is DSSS CDMA.