• 제목/요약/키워드: Medium Foam

검색결과 59건 처리시간 0.022초

High cell density cultivation of Bacillus sp.

  • 이백석;채원복;조재희;최기현;김영범;최성원;김은기
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.290-293
    • /
    • 2001
  • 본 연구는 Bacillus sp.의 고농도 생산을 위한 최적배지 조건의 확립과 배양중 발생하는 foam control에 대해 알아보았다. PBD와 “one factor at a time", BBD로 이여지는 배지 최적화 과정을 통해 최초 생산 배지에서의 균체량보다 100% 이상의 향상된 균사체량을 볼 수 있었다. 또한 scale-up 과정에서 발생하는 foam control를 위해 각기 다른 type의 antifoam을 사용하였는데, 적당한 농도에서 좋은 생장을 보이고 있었고, vegetable oil은 foam control과 값비싼 탄소원인 soluble starch을 대신할 수 있는 좋은 기질임을 알 수 있었다. 또한 배양액 내의 산소를 잡고 있으면서 좋은 전달자의 역학을 하여 급격한 DO의 감소를 막아주었다.

  • PDF

초음파검사 시 기존 초음파젤과 비교한 손소독제의 유용성 연구 (A Study on the Effectiveness of Hand Sanitizer compared to Conventional Ultrasound Gel during Ultrasound Examination)

  • 서선열;이진옥;김영란
    • 한국방사선학회논문지
    • /
    • 제17권6호
    • /
    • pp.957-964
    • /
    • 2023
  • 본 연구는 시중에 판매되고 있는 다양한 성분과 제형의 손 소독제들을 전파 매질로 활용하여 초음파 검사를 진행한 후 획득한 영상을 평가·비교하여 기존의 초음파 젤의 대체 가능성을 확인하고자 하였다. 연구 방법으로는 점도가 낮은 liquid type을 제외한 gel type, cream type, foam type의 제형의 제품들을 선정해 에탄올 62% gel type 1개와 cream type 1개, 벤잘코늄 염화물 0.066% cream type 1개와 foam type 1개를 각각 초음파 매질로 사용하여, 축방향 & 측방향 분해능, 투과심도, probe와 phantom 사이의 공기층 형성유무에 관한 영상 평가를 진행하였다. 그 결과, 축방향 & 측방향 분해능 평가와 투과심도 평가에서 4개 실험군 모두 평가 기준에 적합한 결과가 나왔다. 그러나 foam type의 경우 분해능과 투과심도의 평가 기준에는 적합하지만 영상 평가 시 관찰 중심부를 제외한 양 측면부에서 어두운 음영으로 나타났다. 해당 실험을 통해 foam type을 제외한 나머지 3종의 손 소독제는 초음파 젤을 대체할 수 있을 것으로 사료된다.

Test and Evaluation Procedure of Foam Core Materials for Composite Ships

  • Jang, Jae-Won;Jeong, Sookhyun;Oh, Daekyun;Cho, Je-Hyoung;Noh, Jackyou
    • 해양환경안전학회지
    • /
    • 제26권3호
    • /
    • pp.286-296
    • /
    • 2020
  • Sandwich structures are general-purpose structures that can reduce the structural weight of composite ships. Core materials are essential for these structures, with polyvinyl chloride (PVC) foams being the most popular. These foam core materials are subjected to various tests in the development process, and must satisfy the performance requirements of several ISO and ASTM standards. Therefore, a procedure for evaluating the performance of foam core materials was proposed in this paper. In addition, prototypes were fabricated using a commercial PVC foam core product in accordance with the structural design of an 11 m fiber-reinforced plastic yacht. Then, a case study was conducted on the proposed evaluation procedure. The proposed procedure facilitates the understanding of the performance requirements and evaluation of core materials used in composite ships and is expected to be utilized in developing core materials for marine structures.

'매향' 딸기의 삽목 번식 시 가습 기간 및 배지 종류에 따른 발근율과 생존율 (Rooting Rate and Survival Rate as Affected by Humidification Period and Medium Type of 'Maehyang' Strawberry on Cutting Propagation)

  • 황희성;정현우;이혜리;황승재
    • 생물환경조절학회지
    • /
    • 제29권3호
    • /
    • pp.219-230
    • /
    • 2020
  • 본 연구는 시설 딸기(Fragaria × ananassa Duch. cv. Maehyang)의 삽목묘 생산을 위해 적절한 배지 및 가습 기간을 구명하기 위해 수행되었다. 2019년 2월에 코이어(CO), 암면(RW), 페놀폼(PF), 유기성형배지(OFM)에 삽수를 삽목하여 0, 3, 6, 9, 12일간 포깅 처리를 하였으며, 2019년 6월에 현장실증 실험으로 코이어(CO), 암면(RW), 페놀폼(PF), 유기성형배지(OFM)에 삽수를 삽목하여 0, 6, 9, 12, 15일간 미스팅 처리를 하였다. 포깅 처리에서 삽목묘의 발근율과 생존율은 포깅 기간이 길어질수록 증가하는 경향을 보였으며, CO 배지에서 9일 이상 포깅 처리하였을 때 발근율과 생존율이 유의적으로 높았다. 미스팅 처리에서 발근율은 CO와 RW 배지에서 9일 이상 미스팅 처리하였을 때, 생존율은 12일 이상 미스팅 처리하였을 때 유의적으로 높았다. 육묘기에 배지 및 가습 처리에 따른 지상부와 지하부의 생육은 유의적인 차이가 없었다. 따라서 발근율과 생존율을 고려하였을 때, CO 배지에서 9일간 가습 처리하는 것이 안정적인 삽목묘의 생산에 유리할 것으로 판단된다.

Nonlocal-strain gradient forced vibration analysis of metal foam nanoplates with uniform and graded porosities

  • Barati, Mohammad Reza
    • Advances in nano research
    • /
    • 제5권4호
    • /
    • pp.393-414
    • /
    • 2017
  • Forced vibration behavior of porous metal foam nanoplates on elastic medium is studied via a 4-variable plate theory. Different porosity distributions called uniform, symmetric and asymmetric are considered. Nonlocal strain gradient theory (NSGT) containing two scale parameters is employed for size-dependent modeling of porous nanoplates. The present plate theory satisfies the shear deformation effect and it has lower field variables compared with first order plate theory. Hamilton's principle is employed to derive the governing equations. Obtained results from Galerkin's method are verified with those provided in the literature. The effects of nonlocal parameter, strain gradient, foundation parameters, dynamic loading, porosity distributions and porosity coefficient on dynamic deflection and resonance frequencies of metal foam nanoscale plates are examined.

Finite element formulation and vibration of nonlocal refined metal foam beams with symmetric and non-symmetric porosities

  • Al-Maliki, Ammar F.H.;Faleh, Nadhim M.;Alasadi, Abbas A.
    • Structural Monitoring and Maintenance
    • /
    • 제6권2호
    • /
    • pp.147-159
    • /
    • 2019
  • In present article, a size-dependent refined thick beam element has been established based upon nonlocal elasticity theory. Next, it is used to explore vibration response of porous metal foam nanobeams on elastic medium. The established beam element introduces ten degrees of freedom. Different porosity distributions called uniform, symmetric and asymmetric will be employed. Herein, introduced thick beam element contains shear deformations without using correction factors. Convergence and verification studies of obtained results from finite element method are also provided. The impacts of nonlocality factor, foundation factors, shear deformation, slenderness ratio, porosity kinds and porosity factor on vibration frequencies of metal foam nano-sized beams have been explored.

발포 금속 내 공기 유동 및 압력강하에 관한 시뮬레이션 (The Simulation about the Air Flow and Pressure Drop inside the Metal Foam)

  • 김필환;김미화;장석준;정한식;정효민
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.1053-1058
    • /
    • 2008
  • Porous medium was considered in the present study for the heat transfer enhancement. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. But when the air or water flow through in the porous medium, it is occurred the pressure drop between inlet and outlet. So in the present study investigated simulation result about the pressure drop in the porous medium before apply to heat exchanger. In this simulation, the thickness of the solid inside the porous medium region was varied 0.2 mm to 0.4 mm. And then the simulation result were compared the pressure drop in the same unit cell ($0.5\;mm{\times}0.5\;mm{\times}0.5\;mm$). To make the analysis model, it was assumed the 14-sided tetrakaidecahedron cell which has long been considered the optimal packing cell first proposed by the Lord Kelvin in 1887. And then the simulation is carried out using by STAR-CCM+ which is commercial software. The simulation result can be showed quantified pressure drop by solid effect in the porous medium.

  • PDF

Control of Both Foam and Dissolved Oxygen in the Presence of a Surfactant for Production of $\beta$-Carotene in Blakeslea trispora

  • Kim, Seon-Won;Lee, In-Young;Jeong, Jae-Cheol;Lee, Jung-Heon;Park, Young-Hoon
    • Journal of Microbiology and Biotechnology
    • /
    • 제9권5호
    • /
    • pp.548-553
    • /
    • 1999
  • A production of $\beta-Carotene$was attempted in a fed-batch culture of Blakeslea trispora by controlling both foam and dissolved oxygen in the presence of surfactant, Span 20. Results obtained from the shake flask cultures indicated that a high concentration of dissolved oxygen was needed for both cell growth and $\beta-Carotene$ synthesis, and the optimal concentration of glucose was found to be in the range of 50-100 g/l. In order to maintain the dissolved oxygen concentration level at higher than 50% of air saturation, pure oxygen was automatically sparged into the medium with air. Foam was controlled by bypassing air from the submerged aeration to the headspace in response to the foam that was caused by Span 20. High agitation speed was found to be detrimental to the cell growth due to shear damage, even though it provided sufficient dissolved oxygen. On the other hand, a low aeration speed caused stagnant regions in the fermentor because of improper mixing. Thus, for the fed-batch operation, agitation speed was increased gradually from 300 to 700 rpm to prevent cell damage at the initial stage of fermentation and to give efficient mixing for a viscous culture broth as the culture proceeded. By controlling dissolved oxygen and foam, a high concentration of $\beta-Carotene$otene (1,190 mg/l) was obtained in 6 days of the fed-batch culture of B. trispora with 2.5% of the dry cell weight, which was approximately 5 times higher than that of the batch cultures.

  • PDF

분말활성탄 및 제올라이트 담지 폴리우레탄 담체를 이용한 바이오필터에서의 악취가스 제거 (Odorous Gas Removal in Biofilter with Powdered Activated Carbon and Zeolite Coated Polyurethane Foam)

  • 이수철;김동진
    • 청정기술
    • /
    • 제18권2호
    • /
    • pp.209-215
    • /
    • 2012
  • 분말활성탄과 제올라이트가 담지된 폴리우레탄 담체를 충진한 파일롯 규모의 바이오필터를 이용하여 암모니아와 황화수소의 처리 성능을 평가하였다. 약 10개월간 하수처리장 슬러지 농축조에서 발생하는 악취를 대상으로 바이오필터 유입 암모니아 농도는 0.1~1.5 $ppm_v$, 황화수소 농도는 2~20 $ppm_v$ 범위에서 운전되었다. 바이오필터의 공탑체류시간 3.6~5초 범위에서 초기 순응기간을 제외하고는 거의 모든 경우 100%에 가까운 악취 제거율을 보여주었다. 바이오필터에서의 기체흐름에 의한 압력손실도 매우 낮아 10개월 동안 최대 31 mm $H_2O$ 정도의 차압이 발생하였다. 이것은 본 연구에 이용된 바이오필터의 막힘이나 담체의 압착 현상이 거의 일어나지 않아 장기간의 운전에도 안정성을 확인할 수 있었다. 담체에 부착하여 서식하는 미생물군집은 바이오필터의 처리 성능에 중요한 영향을 미치는데 특히 암모니아나 황화수소를 제거하기 위한 암모니아 산화균과 황산화균의 분포가 중요하다. FISH (Fluorescence in Situ Hybridization) 방법으로 확인한 결과 질산화를 주관하는 암모니아 산화균인 Nitrosomonas sp.와 황산화균인 Thiobacillus ferroxidans가 검출되었다. 또한 바이오필터의 운전기간이 길어질수록, 그리고 악취의 유입부분이 유출부분에 비해 미생물 분포량이 더 많음을 확인하였다.

금속 폼 압축에 의한 자가 가압 효과 및 PEMFC 성능 개선 (Self-pressurization Effect and PEMFC Performance Improvement Using Metal Foam Compression)

  • 김현우;김준범
    • 공업화학
    • /
    • 제33권6호
    • /
    • pp.618-623
    • /
    • 2022
  • 분리판은 반응물 및 전자를 전달하고 부산물인 물과 열을 배출하며, 막전극접합체의 지지체 역할을 하는 고분자전해질 연료전지의 핵심 구성요소이다. 따라서 분리판의 유로 구조는 연료전지의 성능을 향상시키는데 중요한 역할을 한다. 본 연구에서는 압축률이 다른 구리 폼을 cathode 분리판에 적용한 25 cm2 단위 전지를 이용하여 성능 평가를 수행하였다. 금속 폼의 압축률이 증가할수록 총 저항이 감소하였으며, 특히 전하전달과 물질전달 저항이 사형 유로에 비해 크게 개선되어 중전류밀도 및 고전류밀도 영역에서 전압 손실을 줄일 수 있었다. 가압한 공기를 사용한 사형 유로 구조의 경우 연료전지의 성능이 압축한 금속 폼(S3)을 적용한 유로와 중전류밀도 영역까지는 큰 차이가 없었으나, 고전류밀도 영역에서는 유로 구조의 한계로 낮은 성능을 보였다.